Iiyama Prolite P1905s 1 User Manual

							ENGLISH
Put the monitor on a stable surface. The monitor may cause injury or damage if it 
falls or is dropped. 
						

							ENGLISH
CONTROLS AND CONNECTORS
 
7     BEFORE YOU OPERATE THE MONITOR
 Power Switch

 (     ) / Power Indicator
   Blue:  Normal operation
   Orange: Power Management
      The monitor enters into power management mode which reduces the power 
    consumption to less than 1W when receiving no horizontal and/or vertical sync  
  signal.
 Select / Auto Image Adjust Button (      ) 
 Scroll Up / Volume Button () 
  Scroll Down Button / Brightness/Contrast short cut keys ( 
)
 Menu Button

(      )  
   Speakers
  D-SUB mini 15pin Connector

(VGA)  
  DVI-D 24pin Connector

(DVI)
 Audio Connector
  
 Keyhole for Security Lock 
    You can fasten a security lock and cable to prevent the monitor from being removed  
 without your

permission.
 
  AC Connector (AC IN)
NOTE
NOTE
2
1
 
						

							ENGLISH
CONNECTING YOUR MONITOR
  Ensure that both the computer and the monitor are switched off.
  Connect the computer to the monitor with the signal cable.
  Connect the monitor to the audio equipment with the Audio Cable for computer when using the 
audio features.
  Connect the Power Cable to the monitor fi rst and then to the power supply.
  Power of the monitor and the computer is turned on.
NOTE 

						

							ENGLISH

						

							ENGLISH
BEFORE YOU OPERATE THE MONITOR     10
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : ProLite PB1705S

						

							ENGLISH
11     OPERATING THE MONITOR
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT 
TIMING shown on page 26. You are also able to adjust the picture by following the button operation 
shown below. For more detailed adjustments, see page 16 for SCREEN ADJUSTMENTS.
 Press the 1Button to start the On Screen Display feature. There are additional 
Menu items which can be switched by using the 
 /  Buttons.  
B  Select the Menu item which contains the adjustment icon relating to the adjustment 
you want to make. Press the 
2Button. Then, use the  /  Buttons to highlight the 
desired adjustment icon. 
C Press the 
2Button again. Use the  /  Buttons to make the appropriate 
adjustment or setting. 
Adjustments for H. / V. Position, Horizontal Size and Fine Tune are saved for each signal timing. 
Except for these adjustments, all other adjustments have only one setting which applies to all signal 
timings.
When button operations are aborted during adjustment, On-Screen Display disappears when the 
time set for the OSD Timeout has passed. Also, the
 1
button can be used to return previous menu 
and turn off the On-Screen Display. 

						

							ENGLISH
OPERATING THE MONITOR     12
ADJUSTMENT MENU CONTENTS
You can skip the Menu items and display an adjustment scale directly by using the following button 
operations.
z Auto Image Adjust : Press the 
2
Button when the Menu is not displayed.
Direct
*   For best results, use the Auto Image Adjust in conjunction with the adjustment pattern. See page 16 
for SCREEN ADJUSTMENTS.
Adjustment Item Problem / Option                       Button to Press
Contrast / Brightness
Direct
Too dark 
Too bright Brightness* ContrastToo dull
Too intense
*
 Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too 
bright. Can not select when ECO is On.
You can skip the Menu items and display an adjustment scale directly by using the following button 
operations.
z CONTRAST / BRIGHTNESS : Press the 
 Button when the Menu is not displayed.
  Contrast and Brightness are switched as follows by pressing the 
 /  Buttons successively.
Direct
Direct
Adjustment Item Problem / Option                       Button to Press
Auto Image Adjust
Auto Image Adjust *DirectAdjust H. / V. Position, Horizontal Size and Fine Tune 
automatically.
Only Analog  Input
Auto Image Adjust
NOTEThe screen becomes dark for approximately fi ve seconds during the adjustment.
Contrast/Brightness
 
						

							ENGLISH
Adjustment Item Problem / Option                                 Button to Press
Color Adjust
Cool
Bluish white (9300K)
Green Red
BlueToo weak
Too strong User Color
13     OPERATING THE MONITOR
Input Select
When only one of the two signal inputs is connected to the signal source, the one connectedis 
automatically selected. Input Select function is not available if there is no signal input from 
theselected connector or during the power management mode.
NOTE
Select the D-sub input.     
Select the DVI input.      Analog
Digital
Adjustment Item Problem / Option                                 Button to Press
Input SelectInput Select
Adjustment Item Problem / Option                                 Button to Press
Audio Adjust
Volume
Turn off the sound temporarily. Return the sound volume to the previous level.
Mute
Audio Adjust
Too soft
Too loud
NOTETo switch Mute on or off, press the 2
Button successively.
    Mute off       Mute on
Color Adjust
Normal Reddish white (6500K)
Warm Greenish white (5400K)
2
You can skip the Menu items and display an adjustment scale directly by using the following button 
operations.
z Volume : Press the
  Button when the Menu is not displayed.
Direct
Direct
 
						

							ENGLISH
Adjustment Item Problem / Option                       Button to Press
Setup Menu
Language Select
English
DeutschEnglish
German Français FrenchFinnish
Simplifi ed Chinese 
Italiano ItalianTraditional Chinese Español Spanish
Adjustment Item Problem / Option                       Button to Press
Manual Image AdjustOnly Analog  Input
Fine Tune Horizontal Size
Too left
Too right
Too low
Too highH. Position
V. Position
Too narrow
Too wide
To correct fl ickering text or lines
OSD TIMEOUTH. PositionOSD is too left
OSD is too right
OSD is too low
OSD is too high
You can set the OSD display duration time 
between 5 and 60 seconds. V. Position
InformationInformation
Information
H.Frequency:
V.Frequency:
Resolution:
Pixel Clock:
Serial Number:
Model Number:
ExitAnalog
63.9KHz
60.0Hz
1280 x 1024
107.8MHz
1108901000001
PLP1705S
See your graphic card user guide for more information about changing 
the resolution and refresh.
NOTE
Displays information regarding the current input signal coming from the 
graphic card in your computer.
OPERATING THE MONITOR     14
Manual Image Adjust
H./V. Position
SharpnessAdjust the picture quality at resolutions of
less 1280 x 1024.
You can change the picture quality (4 steps).
Suomi
Japanese
Setup Menu
OSD Position
OSD Background
Return the background of OSD   The background of OSD is made transparent
On
Off
 
						

							ENGLISH
Direct
You can display an adjustment scale directly by using the following button operations.
z  KEY LOCK (OSD and POWER SWITCH) :            
      Lock : Press the 
1
Button and  Button and hold down for 10 seconds.
      Unlock : Press the 
1
Button and  Button and hold down for 10 seconds.
z  ECO :   On : Press the 
1
Button and  Button at the same time when the Menu is not displayed.
      Off : Press the 
1
Button and  Button at the same time when the Menu is not displayed.
15     OPERATING THE MONITOR
Memory Recall
Adjustment Item Problem / Option                                 Button to Press
Memory RecallMemory Recall
Factory-preset data is restored.