Iiyama Prolite P1904s User Manual
Have a look at the manual Iiyama Prolite P1904s User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 49 iiyama manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 6
ENGLISH
The following symptoms are normal with LCD monitors and do not indicate \
a problem.
NOTEWhen you first turn on the LCD monitor, the picture may not fit in the display area
because of the type of computer that is used. In this case, adjust the p\
icture
position to the correct position.
„
Due to the nature of the LCD screen, an afterimage of the previous screen may
remain after switching the image, when the same image is displayed for h\
ours. In
this case, the screen is recovered slowly by...](http://img.usermanuals.tech/thumb/2472/51923/w64_iiyama_prolite_p1904s-user-manual-5.png "Page 6
ENGLISH
The following symptoms are normal with LCD monitors and do not indicate \
a problem.
NOTEWhen you first turn on the LCD monitor, the picture may not fit in the display area
because of the type of computer that is used. In this case, adjust the p\
icture
position to the correct position.
„
Due to the nature of the LCD screen, an afterimage of the previous screen may
remain after switching the image, when the same image is displayed for h\
ours. In
this case, the screen is recovered slowly by...")
![Page 8
2
BEFORE YOU OPERATE THE MONITOR
[Stopper] ProLite PB1704S
ProLite PB1904S
Please stand the monitor and then remove
the stopper on the back of the sand slowly.
CONNECTING
・To connect the monitor to your PC
1. Make sure that the PC and the monitor is unplugged.
2. Connect the 15-pin signal cable to the monitor and The PC (see fig. 2a)
3. If you have a graphic card with a digital DVI-D connector (24-pin socket), then
connect one end of the DVI-D cable to the DVI-D connector...](http://img.usermanuals.tech/thumb/2472/51923/w64_iiyama_prolite_p1904s-user-manual-7.png "Page 8
2
BEFORE YOU OPERATE THE MONITOR
[Stopper] ProLite PB1704S
ProLite PB1904S
Please stand the monitor and then remove
the stopper on the back of the sand slowly.
CONNECTING
・To connect the monitor to your PC
1. Make sure that the PC and the monitor is unplugged.
2. Connect the 15-pin signal cable to the monitor and The PC (see fig. 2a)
3. If you have a graphic card with a digital DVI-D connector (24-pin socket), then
connect one end of the DVI-D cable to the DVI-D connector...")
5 English IMAGE SETTINGS USING THE OSD MENU The OSD menu is a window on your screen that allows you to view and change display settings. To change an OSD setting: Deutsch Français Polski Nederlands Figure 4.Monitor features Press the MENU button ( ② in fig. 4) to display the OSD menu on the screen. 1. There are a total of 5 OSD submenus divided by categories. Select the desired submenu by pressing the ◀ or ▶ button ( ④ and ⑤ in fig. 4; see section “OSD Menu Functions ”). 2. Press the button MENU (② in fig. 4) to activate the selected function or associated submenu. 3. If you selected submenu, now select the sub-function you want using the ◀ or ▶ buttons(④ and ⑤ in fig. 4). 4. Set the desired value using the ◀ or ▶ button. 5. Press the MENU button ( ② in fig. 4) to save the setting. Repeat setups 2-5 to make further adjustments as needed. 6. The OSD menu automatically disappears if no changes are made for more than 20 seconds (default setting). The cu rrent settings will be saved. You can close it manually by pressing the AUTO button ( ① in fig. 4). Direct You can lock the OSD. Lock: Press the < Key + Auto key keep push 10s. Un Lock: Press the < Key + Auto key keep push 10s.
OSD MENU FUNCTIONS Brightness/Contrast Adjustment Item Problem/Option Button to Press Press ▶ BRIGHTNESS Too dark 6 Too bright Press ◀ Press ▶ CONTRAST Too dark Too bright Press ◀ IMAGE CONTROL Adjustment Item Problem/Option Button to Press AUTO ADJUSTMENT Adjust H./V. Position, Pixel Clock and Phase automatically. Press ▶ Too left H.POSITION Press ◀ Too right Press ▶ Too low V. P O S I T I O N Press ◀ Too high Press ▶ Too narrow CLOCK Press ◀ Too wide Press ◀ or ▶ PHASE To correct flickering text or lines.
7 English Deutsch Français Polski Nederlands COLOR Problem/Option Button to Press 9300k 6500k Red Green CUSTOM COLOR Blue Too week Press ▶ Too strong Press ◀ sRGB OSD CONTORL Adjustment Item Problem/Option Button to Press H OSD POSITION OSD is too left Press ▶ OSD is too right Press ◀ V OSD POSITION OSD is too low Press ▶ OSD is too high Press ◀ OSD TIMEOUT you can set the OSD display duration time. Too bright Press ◀ or ▶ OTHER Adjustment Item Problem/Option Button to Press LANGUAGE English, German, French, Spanish, Italian, Polish, Nether land, Russian,Japanese. INPUT D-Sub or DVI Too soft Press ▶ SPEAKER VOLUME CONTRAST Too loud Press ◀ INFORMATION Displays information regarding the current input signal coming from the graphic card in your computer ON or OFF RESET Adjustment Item Problem/Option Button to Press YES Factory-preset data is restored. NO Return to menu.
8
TROUBLESHOOTING
Blank Screen
Power indicator is off
z Make sure the power cable and the power adapter are connected properly
(see section “Connecting”).
z Make sure that the monitor was turned on using the power switch (see
section “Sta rtu p ”).
Power indicator lights orange
z A screen saver may have activated automatically after a certain period of
inactivity. Press any key on your keyboard or move the mouse.
“Check signal cable ”message z Is the signal cable connected to the monitor and the PC’s graphics port
(see section “Connecting ”)?
z Is the PC turned on (see your PC’s documentation)?
Display Problems
Image is displaced to the left/right or to the top/bottom
z If the image appears normal but off-center, you can adjust it using the
OSD functions. For further information, see chapter “Basic Setup ”,
section “Auto Image Adjustment” .
Image flickers or is shaky
z Perhaps setup file chosen for the monitor is incorrect. For information on
monitor setup under Windows®9x/ME/2000/NT/XP consult the
“ Configuration ” section.
Image is blurred z Check brightness and contrast settings (see chapter “OSD Menu
Functions ”, section “Brightness/Contrast ”).
z Check the resolution setting (see “Other ” functions in the “OSD Menu
Functions ” section).
Color problems z If the colors are off (e.g. white is not really displayed as white, etc.), you
should adjust the color temperature (see “Color ” function in section
“ OSD Menu Functions ”).
9 English Deutsch Français Polski Nederlands TECHNICAL SPECIFICATIONS PLP1704S PLPB1704S PLP1904S PLPB1904S LCD panel Daiagonal:17.0” Pixel Pitch:0.264(W)x0.264(H) Brightness:300cd/m 2 (Typ) Contrast ratio:1000:1(Typ) Viewing angle: Right/Left:80 degrees each Up/Down:80 degrees each Response time:5ms (Black, white, black) Daiagonal:19.0” Pixel Pitch:0.294(W)x0.294(H) Brightness:300cd/m2 (Typ) Contrast ratio:1000:1 (Typ) Viewing angle: Right/Left:85 degrees each Up/Down:80 degrees each Response time:5ms (Black, white, black) Display colors Approx. 16.2M Approx. 16.7M Sync Frequency 31~ 81 kHz horizontal, 56 ~ 75 Hz vertical Dot Clock 160MHz maximum Maximum Resolution 1280 x 1024 Input Connector D-Sub mini 15pin, DVI-D 24pin Plug & Play VESA DDC2BTM Input Sync Signal Separate sync: TTL, Positive or Negative Input Video Signal Analog:0.7Vp-p (Standard), 75Ω,Positive Digital: DVI(Digital Visual Interface standard Rev.1.0) compliance. Input Audio Connectorφ3.5mm mini jack (Stereo) Input Audio Signal 0.5Vrms maximum Speakers 1W x 2 (Stereo speakers) Maximum Screen Size 337.920mm(W)x270.336(H) 376.32mm(W)x301.056(H) Power Source 100-240VAC, 50/60Hz, 1.0A Power consumption 28W (typ) Power management mode*:2W 34W (typ) Power management mode*:2W Dimensions W:380 mm H:402.5mm D:214mm W:380 mm H:380~490mm D:220mm W:426 mm H:436mm D:214mm W:426 mm H:401~511mm D:220mm Net Weight 4.6Kg 5.6Kg 5.0Kg 6.0kg Tilt Angle Forward:5 degrees Backward:20 degrees Environmental Considerations Operation: Temperature 5 - 35℃ humidity:20 - 90% (No condensation) Storage: Temperature -20- +60℃ humidity:5 – 90% (No condensation) Approvals TCO’03, CE, CB,TUV-GS,TUV-ERGO *Condition :Audio equipment is not connected.
10 RECYCLING INFORMATION All recycling information is placed in the iiyama international’s website. http://www.iiyama.com/recycle