Iiyama Prolite P1904s User Manual

							USER MANUAL
Thank you very much for choosing the
iiyama LCD monitor.
We recommend that you take a few
minutes to read carefully through this
brief but comprehensive manual before
installing and switching on the monitor.
Please keep this manual in a safe
place for your future reference.
 ENGLISH
DEUTSCH
FRANCAIS
POLSKINEDERLANDS
PLP1704S_1904S-e-COVER-RevD .P65 2008/03/14, 14:081
 
						

							
 ENGLISH
Congratulations!
The display you have just purchased carries the TCO’03 Displays
label. This means that your display is designed, manufactured
and tested according to some of the strictest quality and
environmental requirements in the world. This makes for a high
performance product, designed with the user in focus that also
minimizes the impact on our natural environment.
Some of the features of the TCO’03 Display requirements:
Ergonomics
• Good visual ergonomics and image quality in order to improve the working\
 environment for the user and to reduce sight and strain problems. Important parameters are l\
uminance, contrast,
resolution, reflectance, colour rendition and image stability.
Energy
• Energy-saving mode after a certain time – beneficial both for the use\
r and the environment
• Electrical safety
Emissions
• Electromagnetic fields
• Noise emissions
Ecology
• The product must be prepared for recycling and the manufacturer must hav\
e a certifiedenvironmental management system such as EMAS or ISO 14 001
• Restrictions on o chlorinated and brominated flame retardants and polymers
o heavy metals such as cadmium, mercury and lead.
The requirements included in this label have been developed by TCO Devel\
opment in cooperation
with scientists, experts, users as well as manufacturers all over the wo\
rld. Since the end of the
1980s TCO has been involved in influencing the development of IT equipme\
nt in a more user-
friendly direction. Our labelling system started with displays in 1992 a\
nd is now requested by users
and IT-manufacturers all over the world. For more information, please visitwww.tcodevelopment.com
PLP1704S_1904S-e-COVER .P65 2007/12/05, 17:41 2
 
						

							
 ENGLISH
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC Directive 89/3\
36/EEC “EMC Directive” and 73/23/
EEC “Low Voltage Directive” as amended by Directive 93/68/EEC.
The electro-magnetic susceptibility has been chosen at a level that give\
s correct operation in residential areas,
business and light industrial premises and small-scale enterprises, insi\
de as well as outside of the buildings.
All places of operation are characterised by their connection to the pub\
lic low voltage power supply system.
„We reserve the right to change specifications without notice.
„ All trademarks used in this user manual are the property of their respec\
tive owners.
„ As an E
NERGY STAR® Partner, iiyama has determined that this product meets the ENERGY STAR® guidelines for
energy efficiency.
We recommend recycling of used product. Please contact your dealer or
iiyama service center. Recycle information is obtained via the Internet, using
the address: http://www.iiyama.com
You can access the Web page of different countries from there.
PLP1704S_1904S-e-COVER .P65 2007/12/05, 17:41 3
 
						

							
 ENGLISH
1     FOR YOUR SAFETY
FOR YOUR SAFETY
WARNING
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE
If you notice any abnormal phenomena such as smoke, strange sounds or fu\
mes, unplug the monitor
and contact your dealer or iiyama service center immediately. Further use may be dangerous and
can cause fire or electric shock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of
fire or electric shock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with
any object inside may cause fire, electric shock or damage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Do not use where water may be splashed or spilt onto the monitor as it m\
ay cause fire or electric
shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Be sure to operate the monitor only with the specified power supply. Use of an incorrect voltage will
cause malfunction and may cause fire or electric shock.
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the m\
onitor or any other heavy
objects on the cables. If damaged, the cables may cause fire or electric\
 shock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm \
as the continual breaks in
power may cause malfunction. It is also advised not to touch the plug in\
 these circumstances as it
may cause electric shock.
SAFETY PRECAUTIONS
PLP1704S_1904S-e-COVER .P65 2007/12/05, 17:41 4
 
						

							
 ENGLISH
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky
areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun
shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please \
also ensure that you do not
place any heavy objects on the monitor, and that all cables are routed such that children may not pull
the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause
fire. To allow adequate air circulation, place the monitor at least 10 cm (or \
4 inches) from any walls.
Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the cabinet
will be blocked and the monitor may overheat if the stand is removed. Th\
is may cause fire or damage.
Operating the monitor on its back, side, upside down or on a carpet or a\
ny other soft material may
also cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal
cable is disconnected. If you do not disconnect them, it may cause fire \
or electric shock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended\
 that it is left unplugged to avoid
accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug\
. Never pull on the cable itself
as this may cause fire or electric shock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may damage
your computer.
DO NOT PUT FLOPPY DISKS NEAR THE SPEAKERS
Magnetically recorded data, such as on a floppy disk, may become corrupt\
ed by the magnetic field
produced by the speakers if the disks are placed on or near the speakers\
.
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright bac\
kground or in a dark room. For
optimal viewing comfort, the monitor should be just below eye level and \
40-60 cm (16-24 inches)
away from your eyes. When using the monitor over a prolonged time, a ten\
 minute break every hour
is recommended as looking at the screen continuously can cause eye strai\
n.
OTHERS
FOR YOUR SAFETY      2
PLP1704S_1904S-e-COVER .P65 2007/12/05, 17:41 5
 
						

							
 ENGLISH
The following symptoms are normal with LCD monitors and do not indicate \
a problem.
NOTEWhen you first turn on the LCD monitor, the picture may not fit in the display area
because of the type of computer that is used. In this case, adjust the p\
icture
position to the correct position.
„
Due to  the nature  of the LCD screen, an afterimage of the previous screen may
remain after switching the image, when the same image is displayed for h\
ours. In
this case, the screen is recovered slowly by changing the image or turni\
ng off the
Power Switch for hours.
„
You may find slightly uneven brightness on the screen depending on the de\
sktop
pattern you use.
„
SPECIAL NOTES ON LCD MONITORS
Contact your dealer or iiyama service center for the backlight replaceme\
nt when the
screen is dark, flickering or not lighting up. Never attempt to replace \
it by yourself.
„ Due to the nature of the backlight, the screen may flicker during initia\
l use. Turn off
the Power Switch and then turn it on again to make sure the flicker disa\
ppears.
„
NOTEThe fluorescent light used in the LCD monitor may have to be periodicall\
y replaced.
For the warranty coverage on this component, please check with local iiy\
ama
service center.
If you have to return your unit for service and the original packaging h\
as been
discarded, please contact your dealer or iiyama service center for advic\
e or
replacement packaging.
„
„
WARNING
If you drop any materials or liquids such as water into the monitor when\
 cleaning,
unplug the power cable immediately and contact your dealer or iiyama ser\
vice center.
„
CAUTION
For safety reasons, turn off the power switch and unplug the monitor bef\
ore you
clean it.
„
NOTE
To protect the LCD panel, do not scratch or rub the screen with a hard object.
„
Never use any of the following strong solvents. These will damage the ca\
binet and
the LCD screen.
„
Thinner
Benzine
Abrasive cleaner Spray-type cleaner
Wax
Acid or Alkaline solvent
Touching the cabinet with any product made from rubber or plastic for a l\
ong time
may cause degeneration or loss of paint on the cabinet.
„
CABINET Stains can be removed with a cloth lightly moistened with a mild detergent\
 solvent. Then
wipe the cabinet with a soft dry cloth.
LCD
SCREEN Periodic cleaning with a soft dry cloth is recommended.
Dont use tissue paper etc. because these will damage the LCD screen.
CUSTOMER SERVICE
CLEANING
3      FOR YOUR SAFETY
PLP1704S_1904S-e-COVER .P65 2007/12/05, 17:41 6
 
						

							 
1 
English 
Deutsch
 
Français
 Polski Nederlands     
TABLE OF CONTENTS 
 
CHEKING THE CONTENTS OF THE PACKAGE ............................................................1 
BEFORE YOU OPERATE THE MONITOR .......................................................................2 
CONNECTING ..................................................................................................................2 
WALL MOUNTING ...........................................................................................................3 
STARTUP .........................................................................................................................4 
BASIC SETUP ..................................................................................................................4 
IMAGE SETTINGS USING THE OSD MENU ...................................................................5 
OSD MENU FUNCTIONS.................................................................................................6 
TROUBLESHOOTING......................................................................................................8 
TECHNICAL SPECIFICATIONS .......................................................................................9 
RECYCLING INFORMATION .........................................................................................10 
 
 
CHEKING THE CONTENTS OF THE PACKAGE 
 
The following accessories are included in your package. Check to see if they are enclosed 
with the monitor. If anything is missing or damaged, please contact your local iiyama 
dealer or regional iiyama office. 
・Power Cable* ・D-sub Signal Cable   ・DVI-D Signal Cable 
・Audio Cable   ・User Manual    ・Stand* 
 
* Accessory for PLP series 
 
CAUTION * The rating of the Power Cable enclosed in 120V area is 
10A/125V.If you are using a power supply higher than this 
rating, then a power cable with a rating of 10A/250V must be 
used. However, all guarantees and warranties are void for 
any problems or damage caused by a power cable not 
supplied by iiyama. 
 
 
 
						

							2 
BEFORE YOU OPERATE THE MONITOR 
[Stopper] ProLite PB1704S   
ProLite PB1904S   
Please stand the monitor and then remove   
the stopper on the back of the sand slowly. 
 
 
 
 
 
 
CONNECTING 
・To connect the monitor to your PC 
1. Make sure that the PC and the monitor is unplugged. 
2.   Connect the 15-pin signal cable to the monitor and The PC (see fig. 2a) 
3.  If you have a graphic card with a digital DVI-D connector (24-pin socket), then 
connect one end of the DVI-D cable to the DVI-D connector of your monitor (see 
fig. 2b), the other end to the computer. 
 
 
 
 
 
 
 
 
 
 
  
 
Figure 2a.                               Figure 2b.  
 
 
・Connecting the audio cable 
If your computer is equipped with an audio output port, connect one end of the sound 
cable to the audio Input connector of the monitor (①  in fig. 3) and the other end to the 
Line-Out connector of the computer. 
 
Signal cable DVI-D cable 
Connecting the monitor to 
the PC Connection via the DVI-D 
interface 
 
						

							
 
3 
English ・To connect the monitor to the power source 
Connect the separate power cable ( ②in fig. 3) to the Monitor and a grounded 
outlet. 
 
Deutsch
 
Français
  Polski Nederlands     
 
 
 
 
 
 
 
 
 
               
 
 
Figure 3.Connecting the monitor to the power source 
 
 
 
WALL MOUNTING 
 
The iiyama monitor is shipped with the standard desktop configuration. However, you can 
optionally mount the device on a wall or on a monitor swivel arm (optional accessory). 
Please follow the corresponding instructions (4-hole assembly with a spacing of 4  × 4 
inches (100  ×  100 mm)according to the international VESA FDMI standard). 
 
 
 
 
 
 
 
 
 
 
 
 
 
						

							
4 
STARTUP 
 
1.      First start your PC and then turn on your monitor using the power switch (① in fig. 4). 
The status indicator ( ①  in fig. 4) should light up green.
 
 
2.      Adjust the image to meet your requirements (see the following sections  “Basic 
Setup ” and  “Image settings using the OSD menu ”). 
 
3.      If there is no image displayed  on the monitor, consult the section 
“Troubleshooting”. 
 
 
 
 
BASIC SETUP 
 
・ Automatic Image Adjustment You can adjust the image settings (such  as brightness, contrast, image position, 
phase, etc.) manually or by using the LCD monitor’s automatic image adjustment 
feature. This will adjust the image parameters to their optimal settings for the 
current graphics mode. Press AUTO ( ①  in fig. 4) to launch the automatic 
adjustment. The process will take a short while until completed. 
 ・ Setting the volume directly 
You can adjust the speaker volume of the integrated audio system directly by 
pressing the 
▶ buttons ( ④  in fig. 4 ) while the OSD menu is inactive. Next 
press the 
▶  button to increase the volume or the ◀  button to decrease it. 
 
・ Shortcut for adjusting brightness and contrast You can adjust brightness and contrast directly by pressing the ◀ buttons ( ④in 
fig. 4) while the OSD menu is inactive. Next, press the 
◀ or ▶ buttons ( ④and ⑤ in 
fig. 4) to adjust the brightness or the 
◀ or ▶ buttons ( ④and ⑤  in fig. 4) while the 
OSD contrast.