Iiyama Prolite E2207ws 2 User Manual

ENGLISH
 Ensure that both the computer and the monitor are switched off.
  Connect the computer to the monitor with the signal cable.
  Connect  the  monitor  to  the  audio  equipment  with  the Audio  Cable  for  computer  when  using  the 
audio features.
  Connect the Power Cable to the 	monitor	first	and	then	to	the	power	supply.
NOTE   The  signal  cables  used  for  connecting  the  computer  and  monitor  may  vary  with  the  type  of 
computer used. An incorrect connection may cause...

ENGLISH
 Signal Timing
  Change to the desired signal timing listed on page 21: COMPLIANT TIMING.
  Windows 95/98/2000/Me/XP/Vista Plug & Play
  The iiyama LCD monitor complies with DDC1/2B
TM of VESA standard. The Plug & Play function runs 
on Windows 95/98/2000/Me/XP/Vista by connecting the monitor to DDC1/2BTM compliant computer 
with the Signal Cable supplied. 
  For installation on Windows 95/98/2000/Me/XP/Vista: The monitor Information File for iiyama monitors 
may be necessary for your computer...

ENGLISH
   OPERATING THE MONITOR         9       
ADJUSTING
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT 
TIMING shown on page 21. You are also able to adjust the picture by following the button operation 
shown below. For more detailed adjustments, see page
 14 for SCREEN ADJUSTMENTS.
  Press the Menu Button to start the On Screen Display feature. There are additional 
Menu items which can be switched by using the      / ...

ENGLISH
10       OPERATING THE MONITOR     
ADJUSTMENT MENU CONTENTS
Adjustment ItemProblem / Option                       Button to Press
Adjust H.  /  V.  Position,  H.Size  and  Fine  Tune  
automatically.
*   For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 14 for 
SCREEN ADJUSTMENTS.
NOTE The	screen	becomes	dark	for	approximately	five	seconds	during	the	adjustment.
Adjustment Item
Problem / Option                       Button to Press
Contrast/Brightness
Too...

ENGLISH
     OPERATING THE MONITOR        11     
Adjustment ItemProblem / Option                       Button to Press
Audio Adjust
Volume Too soft
Too loud
Mute
Mute off and on are switched as follows by pressing the Select Button successiv\
ely.
            Mute off      Mute on NOTE
Return the sound volume to the previous level.
Turn off the sound temporarily.    

Adjustment Item Problem / Option                       Button to Press
Input Select
Input Select
VGA and DVI are switched as follows by...

ENGLISH
12        OPERATING THE MONITOR       
Adjustment ItemProblem / Option                       Button to Press
Manual Image Adjust
Horizontal Size*1
Fine Tune*1
H./V. Position*1
Too far to the left
Too far to the right
Too low
Too high
H. Position
V. Position
H.  Position  and  V.  Position  are  switched  as  follows  by  pressing  the
/Button 
successively.
            H. Position      V. Position NOTE
Too narrow
Too wide
To	correct	flickering	text	or	lines
Sharpness Adjust the picture quality...

ENGLISH
Adjustment ItemProblem / Option                       Button to Press
Setup Menu
Language Select
OSD Time Out
OSD Position
English
Deutsch English
German
Français
French
Spanish
H.Position OSD is too far to the left
OSD is too far to the right
OSD is too low
OSD is too high
V.Position
OSD Background Return the background of OSD
On Italiano
Italian
Espanol
Adjustment Item
Problem / Option                       Button to Press
Memory Recall
Memory Recall
Factory-preset data is restored.Finnish...

ENGLISH
SCREEN ADJUSTMENTS
 The screen adjustments described in this manual are designed to set image position and minimize 
flicker	or	blur	for	the	particular	computer	in	use.	
  The  monitor  is  designed  to  provide  the  best  performance  at  resolution  of  1680  ×  1050,  but  can  not 
provide the best at resolutions of less than 1680 × 1050  because the picture is automatically stretched 
to	fit	the	full	screen. It is recommended to operate at resolution of 1680 × 1050 in normal use.
...

ENGLISH
1
 1) Adjust the H.Position so that the left side of the picture frame will move to the left edge 
of the display area.
NOTE  	 When the left side of the picture frame moves apart from the left edge of the display 
area during the H.Size adjustment, adjust steps 1) and 2).
  	 	  Another way to make the H.Size adjustment is to correct the vertical wavy lines in the 
zebra pattern.
  	 	 	The	picture	may	flicker	during	the	H.Size,	H.Position	and	V.Position	adjustment.
  	 	  In case the...

ENGLISH
NOTE 		In	case	 the	strong	 flicker	or	blurs	 remain	 on	a	part	 of	the	 screen,	 repeat	steps	 and 
		 because	 the	H.Size	 may	not	be	adjusted	 correctly.	 If	the	 flicker	 or	blurs	 still	remain,	
set the refresh rate of computer to low (60Hz) and repeat steps from   again.
  	 	  Adjust the H.Position after the Fine Tune adjustment if the horizontal position moves 
during the adjustment.
  Adjust the Brightness and Color Adjust to get the desired picture after you complete the 
H.Size...