Iiyama Prolite E1908ws 1 User Manual

ENGLISH
BEFORE YOU OPERATE THE MONITOR     8

ENGLISH
9     OPERATING THE MONITOR
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT 
TIMING shown on page 23. You are also able to adjust the picture by following the button operation 
shown below. For more detailed adjustments, see page 16 for SCREEN ADJUSTMENTS.
  Press the MENU Button to start the On Screen Display feature. There are additional 
Menu items which can be switched by using the + / - Buttons.  
B  Select the Menu...

ENGLISH
ADJUSTMENT MENU CONTENTS
Adjustment Item Problem / Option                                      Button to Press
Luminance
Too dark 
Too bright Brightness * ContrastToo dull
Too intense
*
  Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too 
bright.
OPERATING THE MONITOR     10
Mode1 Brightness of back-light is reduced.
Mode2Brightness of back-light is reduced more than Mode1. Off Normal
Eco 
Mode3Brightness of back-light is reduced more than Mode2....

ENGLISH
11     OPERATING THE MONITOR
Adjustment Item Problem / Option                                      Button to Press
Image Setup
Phase* Clock*
Too left
Too right
Too low
Too highH. Position
V. Position
Too narrow
Too wide
To correct fl ickering text or lines
Only Analog  Input
Image Setup
Clock
Phase
H.Position
V.Position50
50
50
50
AspectFull
Aspect
Expansion display of Aspect
Expansion display
Full
Aspect
*   See page 16 for SCREEN ADJUSTMENTS.
 

ENGLISH
Adjustment Item Problem / Option                                      Button to Press
Color Temp.
Yellowish white
Bluish white
User-G User-R
User-BToo weak
Too strong User
Greenish white Normal Mode1
Mode2
High contrast DarkMode3
Color Temp.
Gamma
User-R
User-G
User-B50
50
Mode1
50
Color Temp.Warm
Gamma
Color Temp.Normal Warm
Cool
sRGB
sRGB
NOTE

ENGLISH
13     OPERATING THE MONITOR
Language
English
DeutschEnglish
German
Français French
JapanesePortuguese
Italiano ItalianRussian
Simplifi ed Chinese 
Español SpanishPortuguese
Timeout
H.PositionOSD is too left
OSD is too right
OSD is too low
OSD is too high
You can set the OSD display duration time 
between 5 and 60 seconds.
Adjustment Item Problem / Option                                      Button to Press
OSD Setup
V.Position
OSD Setup
H.Position
V.Position
Timeout
Language50
50
English50
 

ENGLISH
See your graphic card user guide for more information 
about changing the resolution and refresh.  NOTE
Displays information regarding the current input signal coming 
from the graphic card in your computer.
Information
Adjustment Item Problem / Option                                      Button to Press
Others
ResetFactory-preset data is restored.
NoReturn to Menu. Ye s
Signal Select
At selected Auto, you can switch the input source by pushing AUTO Button for 2-3 seconds  
successively, However...

ENGLISH
15     OPERATING THE MONITOR
Adjustment Item Problem / Option                                      Button to Press
VolumeToo soft
Too loud
Adjustment Item Problem / Option                                      Button to Press
Auto Adjust  * You can skip the Menu items and display an adjustment scale directly by using the following button 
operations.
Direct
Adjust H. / V. Position, Clock and Phase automatically.
*   For best results, use the Auto Adjust in conjunction with the adjustment pattern....

ENGLISH
SCREEN ADJUSTMENTS

ENGLISH
17     OPERATING THE MONITOR
F  1) Adjust the H.Position so that the left side of the picture frame will move to the left edge of 
the display area.
NOTE