Iiyama Prolite E1908ws 1 User Manual

							DEUTSCH
FRANCAIS
  ENGLISH
USER MANUAL
Thank you very much for choosing the iiyama 
LCD monitor.
We recommend that you take a few minutes 
to read carefully through this brief but 
comprehensive manual before installing 
and switching on the monitor. Please keep 
this manual in a safe place for your future 
reference.
NEDERLANDS
 
						

							ENGLISH
 
						

							ENGLISH
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC Directive 2004/108/EC “EMC 
Directive” and 2006/95/EC “Low Voltage Directive”.
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in 
residential areas, business and light industrial premises and small-scale enterprises, inside as 
well as outside of the buildings. All places of operation are characterised by their connection to 
the public low voltage power supply system.

						

							ENGLISH
1     FOR YOUR SAFETY
FOR YOUR SAFETY
WARNING
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor 
and contact your dealer or iiyama service center immediately. Further use may be dangerous and can 
cause fi re or electric shock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fi re 
or electric shock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug 
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with any 
object inside may cause fi re, electric shock or damage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Do not use where water may be splashed or spilt onto the monitor as it may cause fi re or electric 
shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Be sure to operate the monitor only with the specifi ed power supply. Use of an incorrect voltage will 
cause malfunction and may cause fi re or electric shock.
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy 
objects on the cables. If damaged, the cables may cause fi re or electric shock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in 
power may cause malfunction. It is also advised not to touch the plug in these circumstances as it may 
cause electric shock.
SAFETY PRECAUTIONS
 
						

							ENGLISH
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky 
areas as it may cause fi re, electric shock or damage. You should also avoid areas where the sun 
shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not 
place any heavy objects on the monitor, and that all cables are routed such that children may not pull 
the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause fi re. 
To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls.
Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the cabinet 
will be blocked and the monitor may overheat if the stand is removed. This may cause fi re or damage. 
Operating the monitor on its back, side, upside down or on a carpet or any other soft material may also 
cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal cable 
is disconnected. If you do not disconnect them, it may cause fi re or electric shock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid 
accidents. 
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable itself 
as this may cause fi re or electric shock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may damage 
your computer.
DO NOT PUT FLOPPY DISKS NEAR THE SPEAKERS
Magnetically recorded data, such as on a fl oppy disk, may become corrupted by the magnetic fi eld 
produced by the speakers if the disks are placed on or near the speakers.
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room. 
For optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches) 
away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour is 
recommended as looking at the screen continuously can cause eye strain.
OTHERS
FOR YOUR SAFETY     2
 
						

							ENGLISH
The following symptoms are normal with LCD monitors and do not indicate a problem.
NOTEWhen you fi rst turn on the LCD monitor, the picture may not fi t in the display area 
because of the type of computer that is used. In this case, adjust the picture position 
to the correct position.
						

							ENGLISH
The following accessories are included in your package. Check to see if they are enclosed with the 
monitor. If anything is missing or damaged, please contact your local  iiyama dealer or regional iiyama 
offi ce.
*
1 The rating of  the Power Cable enclosed in 120V area is 10A/125V. If you are using  
  a power supply higher than this rating, then a power cable with a rating of 10A/   
  250V must be used.However, all guarantees and warranties are void for any    
  problems or damage caused by a power cable not supplied by iiyama. 
						

							ENGLISH
5     BEFORE YOU OPERATE THE MONITOR
Install the stand on a stable surface. The monitor may cause injury or damage if it 
falls or is dropped. 
						

							ENGLISH
A  Power Switch (     ) 
B Menu / Select Button (MENU)
C  + / Volume Button ( + )
D - / ECO Button ( - ) 
E  Auto Button (AUTO)
F   Power Indicator 
   Blue:  Normal operation
   Orange: Power Management
      The monitor enters into power management mode which reduces the power  
    consumption to less than 1W when receiving no horizontal and/or vertical  
    sync signal.  
G Speakers 
H AC Connector (AC IN) 
I D-SUB mini 15pin Connector (D-SUB)
J DVI-D 24pin Connector (DVI)
K Audio Connector (AUDIO IN)
L Keyhole for Security Lock
You can fasten a security lock and cable to prevent the monitor from being removed 
without your permission.
CONTROLS AND CONNECTORS
NOTE
BEFORE YOU OPERATE THE MONITOR     6
 
NOTE
 
						

							ENGLISH
Power Cable
(Accessory)
Audio Cable (Accessory)
Computer D-Sub Signal Cable  
(Accessory)
DVI-D Signal Cable 
(Not Supplied)
7     BEFORE YOU OPERATE THE MONITOR
CONNECTING YOUR MONITOR
[Example of Connection]
A  Ensure that both the computer and the monitor are switched off.
B  Connect the computer to the monitor with the signal cable.
C  Connect the monitor to the audio equipment with the Audio Cable for computer when using the 
audio features.
D  Connect the Power Cable to the monitor fi rst and then to the power supply.
E  Power of the monitor and the computer is turned on.
NOTE