Icom Ic-r5 Communications Reciever Instruction Manual
Here you can view all the pages of manual Icom Ic-r5 Communications Reciever Instruction Manual. The Icom manuals for Communications receiver are available online for free. You can easily download all the documents as PDF.
Page 11
![Page 11
VI
QUICK REFERENCE GUIDE
New2001
D D
Starting scan
1. Select VFO mode.Push [V/M•S.MW•~] to select the VFO mode for full, band
and programmed scan operation.•Select memory mode by pushing [V/M•S.MW•~] again for mem-
ory or bank scan.2. Selecting a scanning typePush [MODE•SCAN] for 1 sec.,
then rotate [DIAL] to select
one of the desired scanning type.
•Available scan types when VFO mode is selected; “ALL” for full
scan; “BAND” for the selected band; one of “PROGxx” (xx=0 to 24)
for programmed scan....](http://img.usermanuals.tech/thumb/2452/82812/w300_icom_r5-wideband-scanner-reciever_manual_d-10.png "Page 11
VI
QUICK REFERENCE GUIDE
New2001
D D
Starting scan
1. Select VFO mode.Push [V/M•S.MW•~] to select the VFO mode for full, band
and programmed scan operation.•Select memory mode by pushing [V/M•S.MW•~] again for mem-
ory or bank scan.2. Selecting a scanning typePush [MODE•SCAN] for 1 sec.,
then rotate [DIAL] to select
one of the desired scanning type.
•Available scan types when VFO mode is selected; “ALL” for full
scan; “BAND” for the selected band; one of “PROGxx” (xx=0 to 24)
for programmed scan....")
VI QUICK REFERENCE GUIDE New2001 D D Starting scan 1. Select VFO mode.Push [V/M•S.MW•~] to select the VFO mode for full, band and programmed scan operation.•Select memory mode by pushing [V/M•S.MW•~] again for mem- ory or bank scan.2. Selecting a scanning typePush [MODE•SCAN] for 1 sec., then rotate [DIAL] to select one of the desired scanning type. •Available scan types when VFO mode is selected; “ALL” for full scan; “BAND” for the selected band; one of “PROGxx” (xx=0 to 24) for programmed scan....
Page 12
![Page 12
Front, top and side panelsqANTENNA CONNECTOR (p. I)
Connects the supplied antenna.
•An optional AD-92SMA is available for connecting an antenna
with a BNC connector.
wEXTERNAL SPEAKER CONNECTOR [SP]
Connect an optional earphone or headphone.
The internal speaker will not function when any external
equipment is connected. (See p. 65 for a list of available
options.)
eFUNCTION SWITCH [FUNC]
While pushing this switch, access to secondary function.
rSQUELCH SWITCH [SQL]
➥Push and hold to temporarily open...](http://img.usermanuals.tech/thumb/2452/82812/w300_icom_r5-wideband-scanner-reciever_manual_d-11.png "Page 12
Front, top and side panelsqANTENNA CONNECTOR (p. I)
Connects the supplied antenna.
•An optional AD-92SMA is available for connecting an antenna
with a BNC connector.
wEXTERNAL SPEAKER CONNECTOR [SP]
Connect an optional earphone or headphone.
The internal speaker will not function when any external
equipment is connected. (See p. 65 for a list of available
options.)
eFUNCTION SWITCH [FUNC]
While pushing this switch, access to secondary function.
rSQUELCH SWITCH [SQL]
➥Push and hold to temporarily open...")
Front, top and side panelsqANTENNA CONNECTOR (p. I) Connects the supplied antenna. •An optional AD-92SMA is available for connecting an antenna with a BNC connector. wEXTERNAL SPEAKER CONNECTOR [SP] Connect an optional earphone or headphone. The internal speaker will not function when any external equipment is connected. (See p. 65 for a list of available options.) eFUNCTION SWITCH [FUNC] While pushing this switch, access to secondary function. rSQUELCH SWITCH [SQL] ➥Push and hold to temporarily open...
Page 13
![Page 13
2
1
PANEL DESCRIPTION
New2001
1
uCONTROL DIAL [DIAL]
➥Rotate to select the operating frequency.* (p. 9)
➥While scanning, changes the scanning direction.*
(p. 26)
➥While pushing [SQL], sets the squelch level.* (p. 12)
➥While pushing [FUNC], sets the operating frequency in
100 kHz, 1 MHz or 10 MHz in VFO mode.* (p. 9)
➥While pushing [FUNC], selects the memory channel in
10 channels steps in memory mode.* (p. 10)
➥While pushing [BAND•], selects the operating band
in VFO mode.* (p. 7)
iEXTERNAL DC-IN...](http://img.usermanuals.tech/thumb/2452/82812/w300_icom_r5-wideband-scanner-reciever_manual_d-12.png "Page 13
2
1
PANEL DESCRIPTION
New2001
1
uCONTROL DIAL [DIAL]
➥Rotate to select the operating frequency.* (p. 9)
➥While scanning, changes the scanning direction.*
(p. 26)
➥While pushing [SQL], sets the squelch level.* (p. 12)
➥While pushing [FUNC], sets the operating frequency in
100 kHz, 1 MHz or 10 MHz in VFO mode.* (p. 9)
➥While pushing [FUNC], selects the memory channel in
10 channels steps in memory mode.* (p. 10)
➥While pushing [BAND•], selects the operating band
in VFO mode.* (p. 7)
iEXTERNAL DC-IN...")
2 1 PANEL DESCRIPTION New2001 1 uCONTROL DIAL [DIAL] ➥Rotate to select the operating frequency.* (p. 9) ➥While scanning, changes the scanning direction.* (p. 26) ➥While pushing [SQL], sets the squelch level.* (p. 12) ➥While pushing [FUNC], sets the operating frequency in 100 kHz, 1 MHz or 10 MHz in VFO mode.* (p. 9) ➥While pushing [FUNC], selects the memory channel in 10 channels steps in memory mode.* (p. 10) ➥While pushing [BAND•], selects the operating band in VFO mode.* (p. 7) iEXTERNAL DC-IN...
Page 14
3 1 PANEL DESCRIPTION New2001 Function displayqFREQUENCY READOUT Shows variety of information, such as an operating fre- quency, set mode contents, memory names. •The smaller “75,” “50” and “25” to the right of the readout indi- cate 0.75, 0.5 and 0.25 kHz, respectively.•The decimal point blinks during scan. wLOCK INDICATOR(p. 10) Appears when the lock function is activated. eRECEIVE MODE INDICATOR (p. 12) Shows the selected receive mode.•FM, WFM and AM are available. rDUPLEX INDICATORS (p. 14) “DUP”...
Page 15
4 1 PANEL DESCRIPTION New2001 1 yAUTO WRITE CHANNEL INDICATOR(p. 29) Appears when auto write channel is selected. uSKIP INDICATORS(p. 30) ➥“SKIP” appears when the selected memory channel is specified as a skip channel. ➥“P SKIP” appears when the displayed frequency is specified as a skip frequency. iPRIORITY WATCH INDICATOR(p. 33) Appears when priority watch is in use. oMEMORY INDICATOR (pgs. 7, 10) Appears when memory mode is selected. !0MEMORY CHANNEL NUMBER INDICATORS Shows the selected memory channel...
Page 16
![Page 16
5
BATTERY CHARGING
New2001
2Battery installationBefore installing, or replacing the batteries, push [PWR] for
1 sec. to turn the power OFF.
qRemove the battery
cover from the receiver.
wInstall 2 R6 (AA) size Ni-
Cd or Ni-MH batteries.•Be sure to observe the cor-
rect polarity.Keep the battery contacts
clean to avoid rust or
poor contact. It’s a good
idea to clean the battery
terminals once a week.
CautionD
D
Battery caution•CAUTION! NEVERshort the battery terminals. Also, current
may flow into nearby...](http://img.usermanuals.tech/thumb/2452/82812/w300_icom_r5-wideband-scanner-reciever_manual_d-15.png "Page 16
5
BATTERY CHARGING
New2001
2Battery installationBefore installing, or replacing the batteries, push [PWR] for
1 sec. to turn the power OFF.
qRemove the battery
cover from the receiver.
wInstall 2 R6 (AA) size Ni-
Cd or Ni-MH batteries.•Be sure to observe the cor-
rect polarity.Keep the battery contacts
clean to avoid rust or
poor contact. It’s a good
idea to clean the battery
terminals once a week.
CautionD
D
Battery caution•CAUTION! NEVERshort the battery terminals. Also, current
may flow into nearby...")
5 BATTERY CHARGING New2001 2Battery installationBefore installing, or replacing the batteries, push [PWR] for 1 sec. to turn the power OFF. qRemove the battery cover from the receiver. wInstall 2 R6 (AA) size Ni- Cd or Ni-MH batteries.•Be sure to observe the cor- rect polarity.Keep the battery contacts clean to avoid rust or poor contact. It’s a good idea to clean the battery terminals once a week. CautionD D Battery caution•CAUTION! NEVERshort the battery terminals. Also, current may flow into nearby...
Page 17
![Page 17
6
2
BATTERY CHARGING
New2001
2
Battery chargingDCharging connections
•Charging periods:Approx. 10 hours
DCharging descriptionqInstall the Ni-Cd batteries. (See left page)•Ni-MH batteries can also be charged.wPlug the AC adapter into an AC outlet; or the optional CP-
18A/E into a cigarette lighter socket.
eInsert the adapter plug into [DC 6V] of the receiver.
rThe battery type confirmation is displayed as above right.•When no confirmation display is indicated, insert the adapter plug
while pushing [FUNC]....](http://img.usermanuals.tech/thumb/2452/82812/w300_icom_r5-wideband-scanner-reciever_manual_d-16.png "Page 17
6
2
BATTERY CHARGING
New2001
2
Battery chargingDCharging connections
•Charging periods:Approx. 10 hours
DCharging descriptionqInstall the Ni-Cd batteries. (See left page)•Ni-MH batteries can also be charged.wPlug the AC adapter into an AC outlet; or the optional CP-
18A/E into a cigarette lighter socket.
eInsert the adapter plug into [DC 6V] of the receiver.
rThe battery type confirmation is displayed as above right.•When no confirmation display is indicated, insert the adapter plug
while pushing [FUNC]....")
6 2 BATTERY CHARGING New2001 2 Battery chargingDCharging connections •Charging periods:Approx. 10 hours DCharging descriptionqInstall the Ni-Cd batteries. (See left page)•Ni-MH batteries can also be charged.wPlug the AC adapter into an AC outlet; or the optional CP- 18A/E into a cigarette lighter socket. eInsert the adapter plug into [DC 6V] of the receiver. rThe battery type confirmation is displayed as above right.•When no confirmation display is indicated, insert the adapter plug while pushing [FUNC]....
Page 18
![Page 18
7
FREQUENCY AND CHANNEL SETTING
New2001
3VFO and memory channelsThe IC-R5 has 2 normal operating modes: VFO mode and
memory mode.
VFO modeis used for the desired frequency setting within
the frequency coverage.
➥Push [V/M•S.MW•~] to select VFO mode.
Memory modeis used for the desired frequency setting
within the frequency coverage.
➥Push [V/M•S.MW•~] to select memory mode.•See p. 16 for memory programming details.What is VFO?
VFO is an abbreviation of Variable Frequency Oscillator. Fre-
quencies for...](http://img.usermanuals.tech/thumb/2452/82812/w300_icom_r5-wideband-scanner-reciever_manual_d-17.png "Page 18
7
FREQUENCY AND CHANNEL SETTING
New2001
3VFO and memory channelsThe IC-R5 has 2 normal operating modes: VFO mode and
memory mode.
VFO modeis used for the desired frequency setting within
the frequency coverage.
➥Push [V/M•S.MW•~] to select VFO mode.
Memory modeis used for the desired frequency setting
within the frequency coverage.
➥Push [V/M•S.MW•~] to select memory mode.•See p. 16 for memory programming details.What is VFO?
VFO is an abbreviation of Variable Frequency Oscillator. Fre-
quencies for...")
7 FREQUENCY AND CHANNEL SETTING New2001 3VFO and memory channelsThe IC-R5 has 2 normal operating modes: VFO mode and memory mode. VFO modeis used for the desired frequency setting within the frequency coverage. ➥Push [V/M•S.MW•~] to select VFO mode. Memory modeis used for the desired frequency setting within the frequency coverage. ➥Push [V/M•S.MW•~] to select memory mode.•See p. 16 for memory programming details.What is VFO? VFO is an abbreviation of Variable Frequency Oscillator. Fre- quencies for...
Page 19
8 3 FREQUENCY AND CHANNEL SETTING New2001 3 • Available frequency bands AM AM FM FM WAMFMAM FM FM FMFMFM W AM broadcast band HF band 50 MHz band 800 MHz band 400 MHz bandFM broadcast band VHF air band 144 MHz band 300 MHz band Weather channels* TV channels † 1200 MHz band : Push : Rotating while pushing Showing initial frequencies are differ according to version. *Available for the USA version only†Appears only when TV channels are programmed via the optional CS-R5. IC-R5_1.qxd 02.10.23 11:28...
Page 20
![Page 20
9
3
FREQUENCY AND CHANNEL SETTING
New2001
Setting a frequencyqPush [V/M•S.MW•~] to select VFO mode, if necessary.
wSelect the desired frequency band with [BAND•].•Or, while pushing and holding [BAND•], rotate the [DIAL] to
select the desired frequency band.eRotate [DIAL] to select the desired frequency band.•The frequency changes according to the preset tuning steps.
See the right section for setting the tuning step.
•While pushing and holding [FUNC], rotate [DIAL] to change the
frequency in 1 MHz...](http://img.usermanuals.tech/thumb/2452/82812/w300_icom_r5-wideband-scanner-reciever_manual_d-19.png "Page 20
9
3
FREQUENCY AND CHANNEL SETTING
New2001
Setting a frequencyqPush [V/M•S.MW•~] to select VFO mode, if necessary.
wSelect the desired frequency band with [BAND•].•Or, while pushing and holding [BAND•], rotate the [DIAL] to
select the desired frequency band.eRotate [DIAL] to select the desired frequency band.•The frequency changes according to the preset tuning steps.
See the right section for setting the tuning step.
•While pushing and holding [FUNC], rotate [DIAL] to change the
frequency in 1 MHz...")
9 3 FREQUENCY AND CHANNEL SETTING New2001 Setting a frequencyqPush [V/M•S.MW•~] to select VFO mode, if necessary. wSelect the desired frequency band with [BAND•].•Or, while pushing and holding [BAND•], rotate the [DIAL] to select the desired frequency band.eRotate [DIAL] to select the desired frequency band.•The frequency changes according to the preset tuning steps. See the right section for setting the tuning step. •While pushing and holding [FUNC], rotate [DIAL] to change the frequency in 1 MHz...