IBM Thinkpad Transnote Manual
Here you can view all the pages of manual IBM Thinkpad Transnote Manual. The IBM manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 131
7. Paste new velcro tapes1on the bottom side of ThinkScribe digital notepad and remove the old tapes 2as shown in the following figures. Right-handed model to left-handed model Left-handed model to right-handed model (continued) Removing and replacing a FRU ThinkPad TransNote127
Page 132
8. Paste new tape for digitizer1and digitizer base tape2on the bottom side of the computer side, and then remove the other one3. Right-handed model to left-handed model Left-handed model to right-handed model 9. Install the system-digi cable to the new Endurimer or leather cover. (See“1100 Endurimer and system-digi cable”on page 85.) Note:When replacing the Endurimer or the system-digi cable, make sure that the black connector of the system-digi cable is attached to the computer and the white...
Page 133
10. Install the computer side to the new Endurimer or leather cover as follows; a. Connect the system-digi cable to the computer side and then paste new system board plate. b. Paste the new tape (Tape for digitizer 2) aligning the″┌″marks on the base plate. (continued) Removing and replacing a FRU ThinkPad TransNote129
Page 134
c. Tighten the screws and paste the screw caps. Screw holes for a left-handed model. Screw holes for a right-handed model. Screw hole for both models. (continued) Removing and replacing a FRU 130ThinkPad TransNote
Page 135
11. Install the digital notepad to the new Endurimer or leather cover doing as follows; a. Connect the system-digi cable1to the digital notepad and then paste the digitizer plate2. b. Paste the new tape (Tape for digitizer 2)3 aligning the┌marks on the digitizer base plate. (continued) Removing and replacing a FRU ThinkPad TransNote131
Page 136
c. Tighten the screws and paste the screw caps. Screw holes for a left-handed model. Screw holes for a right-handed model. 12. Install the digital-pen holder kit. (See“1070 Digital-pen holder kit”on page 75.) Removing and replacing a FRU 132ThinkPad TransNote
Page 137
Locations Front view 1TrackPoint buttons 2Latch 3System status indicators 4Power switch (computer side) 5Mini PCI Card slot 6Reset switch (computer side) 7DIMM slot 8ThinkPad button 9FlipTouch control button 10Mute button 11Battery pack 12Battery pack latch 13TrackPoint buttons 14Microphone jack 15Infrared port 16Built-in monaural speaker 17Built-in microphone 18Stereo line-in jack 19Stereo headphone jack 20Digital pen 21ThinkScribe digital notepad...
Page 138
Rear view 1CompactFlash card slot 2CompactFlash card eject button 3Modem connector 4Network connector 5Universal serial bus (USB) connector 6External-monitor connector 7Power jack 8Security keyhole 9Port replicator connector 10PC card slot 11Hard-disk drive Locations 134ThinkPad TransNote
Page 139
ThinkScribe digital notepad 1Status display 2Error indicator light 3ThinkScribe reset switch 4Page selector 5Ink Files selector 6Actions selector 7Activity indicator light 8ThinkScribe power button 9Page Forward pen button 10Page Backward pen button 11Cancel pen button 12OK pen button 13Ink refill trays 14Pen holder Locations ThinkPad TransNote135
Page 140
Parts list Overall 26 27 28 3312 3 14 c c b 35 16 15 17 a a13 e d 1810 22 6 7 9 8 5 12 11 19 g f 29 4 20 24 23 21 25 30 31 34 32 Parts list 136ThinkPad TransNote