IBM Thinkpad I Series 12001300 Manual

Safety Notice 8Before removing any FRU, power-off the computer,
unplug all power cords from electrical outlets,
remove the battery pack, then disconnect any
interconnecting cables.
Avant de retirer une unitéremplaçable en clientèle,
mettez le système hors tension, débranchez tous
les cordons d’alimentation des socles de prise de
courant, retirez la batterie et déconnectez tous les
cordons d’interface.
Die Stromzufuhr muβabgeschaltet, alle Stromkabel
aus der Steckdose gezogen, der Akku entfernt und
alle...

vDo not perform any action that causes hazard to the
customer, or that makes the equipment unsafe.
vBefore you start the machine, ensure that other service
representatives and the customer’s personnel are not in
a hazardous position.
vPlace removed covers and other parts in a safe place,
away from all personnel, while you are servicing the
machine.
vKeep your tool case away from walk areas so that other
people will not trip over it.
vDo not wear loose clothing that can be trapped in the
moving parts of a...

vDo not work alone under hazardous conditions or near
equipment that has hazardous voltages.
vDisconnect all power before:
–Performing a mechanical inspection
–Working near power supplies
–Removing or installing main units
vBefore you start to work on the machine, unplug the
power cord. If you cannot unplug it, ask the customer to
power-off the wall box that supplies power to the
machine and to lock the wall box in the off position.
vIf you need to work on a machine that has exposed
electrical circuits,...

vDo not service the following parts with the power on
when they are removed from their normal operating
places in a machine:
–Power supply units
–Pumps
–Blowers and fans
–Motor generators
and similar units. (This practice ensures correct
grounding of the units.)
vIf an electrical accident occurs:
–Use caution; do not become a victim yourself.
–Switch off power.
–Send another person to get medical aid.
Safety Inspection GuideThe intent of this inspection guide is to assist you in
identifying potentially...

continuity for 0.1 ohm or less between the external
ground pin and frame ground.
b. The power cord should be the appropriate type as
specified in the parts listings.
c. Insulation must not be frayed or worn.
4. Remove the cover.
5. Check for any obvious non-IBM alterations. Use good
judgment as to the safety of any non-IBM alterations.
6. Check inside the unit for any obvious unsafe
conditions, such as metal filings, contamination, water
or other liquids, or signs of fire or smoke damage.
7. Check for...

–Attach the ESD ground clip to any frame ground,
ground braid, or green-wire ground.
–Use an ESD common ground or reference point
when working on a double-insulated or
battery-operated system.
–You can use coax or connector-outside shells on
these systems.
–Use the round ground-prong of the AC plug on
AC-operated computers.
Grounding RequirementsElectrical grounding of the computer is required for
operator safety and correct system function. Proper
grounding of the electrical outlet can be verified by a...

CAUTION:
Use of controls or adjustments or performance of
procedures other than those specified herein might
result in hazardous radiation exposure.
O uso de controles, ajustes ou desempenho de
procedimentos diferentes daqueles aqui especificados
pode resultar em perigosa exposição à radiação.
Pour éviter tout risque d’exposition au rayon laser,
respectez les consignes de réglage et d’utilisation des
commandes, ainsi que les procédures décrites.
Werden Steuer- und Einstellelemente anders als hier...

DANGER
Opening the CD-ROM/DVD-ROM drive could result
in exposure to hazardous laser radiation. There are
no serviceable parts inside the CD-ROM/DVD-ROM
drive. Do not open.
Some CD-ROM/DVD-ROM drives contain an
embedded Class 3A or Class 3B laser diode. Note
the following.
Laser radiation when open. Do not stare into the
beam, do not view directly with optical instruments,
and avoid direct exposure to the beam.
Radiação por raio laser ao abrir. Não olhe fixo no
feixe de luz, não olhe diretamente por meio...

Read this first
Before you go to the checkout guide, be sure to read this
section first.
Important Notes:
vOnly certified trained personnel should service the
computer.
vRead the entire FRU service procedures before
replacing any FRUs.
vUse new nylon-coated screws when you replace
FRUs.
vBe extremely careful during write operations such
as copying, saving, or formatting.Drives in the
computer that you are servicing might have been
rearranged or the drive startup sequence might have
been altered. If you...

Before checking problems with the computer, determine
whether the damage is covered under the warranty by
referring to the following:
Note for Warranty:For Warranty:
During the warranty period, the customer may be
responsible for repair costs if the computer damage
was caused by misuse, accident, modification,
unsuitable physical or operating environment, or
improper maintenance by the customer. The
following list provides some common items that are
not covered under warranty and some symptoms
that may...