Hyundai H Pdp4205 Instruction Manual

							ТЕЛЕВИЗОР ЦВЕТНОГО ИЗОБРАЖЕНИЯ
С ПЛАЗМЕННЫМ ЭКРАНОМ
PLASMA TV
Руководство по эксплуатации 
Instruction manual
H-PDP4205
 
						

							Table of contents 
Before you start 
Utilization of the product 
Important safeguards
Connection
ConnectionOutdoor antenna connection
Other connections
Operation
Control elements  Front panel
 Back panel
Remote controller Changing the battery
General operations  Teletext operations
OSD operation Picture setting
Sound setting
Function setting
Timer setting
Channel setting
PC setup
General information
Troubleshooting Causes of interference
Accessories
Specifications
2 3
Table of contentsBefore you start
Dear customer!Thank you for purchasing our product. For safety, it is strongly recommended to read 
this manual carefully before connecting, operating and/or adjusting the product and keep 
the manual for reference in the future.
2
3
3
3
6
6
6
6
7
7
7
7
8
8
9
9
9
10
10
10
10
11
12
13
13
13
14
14
Downloaded From TV-Manual.com Manual” 
						

							23
Table of contentsBefore you start
If you want to dispose this product, do not mix it with general household waste. There is 
a separate collection system for used electronic products in accordance with legislation 
that requires proper treatment, recovery and recycling. Please contact your local authorities for the correct method of disposal. By doing so, 
you will ensure that your disposed product undergoes the necessar y treatment, recovery 
and recycling and thus prevent potential negative effects on the environment and human 
health.
Utilization of the product
Important safeguards
 The lightning flash with the 
arrowhead symbol, within an 
equilateral triangle, is intended to 
alert the user to the presence of uninsulated 
“dangerous voltage” within the product’s 
enclosure that may be of sufficient magnitude 
to constitute an electric shock to persons. 
The exclamation point within an 
equilateral triangle is intended to 
alert the user to the presence of 
important operating and maintenance 
(servicing) instructions in the literature 
accompanying the appliance.
•  WARNING!
To prevent fire or electric shock hazard, do 
not expose this product to rain or moisture. 
Also do not use this unit’s polarized plug with 
an extension cord receptacle or other outlets, 
unless the prongs can be fully inserted. 
Refrain from opening the cabinet, as there are 
high-voltage components inside. When you 
unplug the power cord from AC outlet, hold 
the plug properly, do not touch metallic parts, 
do not pull the cord, do not repair, hazard and 
overheat it.  
•  WARNING!
Still image (immovable) screen may  permanent damage to PDP. Lengthy displayed 
still images from Video games, banners, graphics 
and others may fatally damage the screen. 
When using the PDP in 4:3 formats with 
sidebars for a long period of time, it may 
cause damage to the plasma panel. It is 
recommended that you use 16:9 or other 
formats (image sticking can be avoided by 
using “Panel” function of the Setting’s sub 
menu, however once image sticking occurs, it 
may not disappear completely, an image will 
be dimmed as the image is displayed long time 
or repeatedly. All damages caused by wrong 
usage, do not belong to guarantee service. 
Important safeguard for you and 
your new product.
Your product has been manufactured and 
tested with your safety in mind. However, 
improper use can result in potential electrical 
shock or fire hazards. To avoid defeating the 
safeguards that have been built into your new 
product, please read and observe the following 
safety points when installing and using your new 
product, and save them for future reference.
Observing the simple precautions discussed 
in this booklet can help you get many years of 
enjoyment and safe operation that are built into 
your new product. 1. Read Instructions: All the safety and 
operating instructions should be read before 
the product is operated. All operating and use 
Downloaded From TV-Manual.com Manual” 
						

							4
Before you start
instructions should be followed.2. Retain Instructions: The safety and 
operating instructions should be retained for 
future reference. 3. Heed Warnings: All warnings on the 
product and in the operating instructions 
should be adhered to. 4. Accessories, Carts, and Stands: Do 
not place this product on a slippery or tilted 
surface, or on an unstable cart, stand, tripod, 
bracket, or table. The product may slide or 
fall, causing serious injury to a child or adult, 
and serious damage to the product. Use only 
with a cart, stand, tripod, bracket, or table 
recommended by the manufacturer, or sold 
with the product. Any mounting of the product 
should follow the manufacturer’s instructions, 
and should use a mounting accessory 
recommended by the manufacturer.
If you install your plasma display panel with 
a pedestal, please keep a space at list 10cm at 
above, left, and right of the TV, and 6cm under, 
7 cm behind to get a well ventilation; Besides, 
please keep at list 10cm above, under, right, 
left, and 2 cm behind if you select other 
installation ways. 5. Attachments: Do not use attachments not 
recommended by the product manufacturer as 
they may cause hazards. 6. Power Sources: This product should be 
operated only from the type of power source 
indicated on the marking label. If you are not 
sure of the type of power supply to your home, 
consult your product dealer or local power 
company. For products intended to operate 
from battery power, or other sources, refer to 
the operating instructions. 7. Outdoor Antenna Grounding:  If an 
outside antenna or cable system is connected 
to the product, be sure the antenna or cable 
system is grounded so as to provide some 
protection against voltage surges and built-up 
static charges. 8. Power Lines: An outside antenna system 
should not be located in the vicinity of overhead 
power lines or other electric light or power 
circuits, or where it can fall into such power  lines or circuits. When installing an outside 
antenna system, extreme care should be taken 
to keep from touching such power lines or 
circuits, as contact with them might be fatal.
9. Servicing: Do not attempt to service 
this product yourself as opening or removing 
covers may expose you to dangerous voltage 
or other hazards. Refer all servicing to qualified 
service personnel. 10. Damage Requiring Service: Unplug this 
product from the wall outlet and refer servicing 
to qualified service personnel under the 
following conditions:  •  When the power-supply cord or plug is 
damaged.  •  If liquid has been spilled, or objects have 
fallen into the product. •  If the product has been exposed to rain or 
water. •  If the product does not operate normally 
by following the operating instructions. 
Adjust only those controls that are covered 
by the operating instructions as an improper 
adjustment of other controls may result in 
damage and will often require extensive work 
by a qualified technician to restore the product 
to its normal operation.
•  If the product has been dropped or the 
cabinet has been damaged in any way. •  When the product exhibits a distinct 
change in performance. 11. Water and Moisture: Do not use this 
product near water, for example, near a bath 
tub, wash bowl, kitchen sink, or laundry tub, in 
a wet basement, or near a swimming pool. 
12. Transporting Product: A product and cart 
combination should be moved with care. Quick 
stops, excessive force, and uneven surfaces 
may cause the product and cart combination to 
overturn. 
  Over-press the panel may destroy the 
product. 13. Ventilation: Slots and openings in the 
cabinet are provided for ventilation and to ensure 
reliable operation of the product and to protect 
it from overheating, and these openings must 
not be blocked or covered. The openings should 
Downloaded From TV-Manual.com Manual” 
						

							5
Before you start
not be blocked by placing the product on a bed, 
sofa, rug, or other similar surface. This product 
should not be placed in a built-in installation 
such as a bookcase or rack unless proper 
ventilation is provided or the manufacturer’s 
instructions have been adhered to.14. Overloading: Do not overload wall outlets 
and extension cords as this can result in a risk 
of fire or electric shock.  15. Cleaning: Unplug this product from the 
wall outlet before cleaning. Do not use liquid 
cleaners or aerosol cleaners. Use a dry cloth 
for cleaning.  16. Lightning: For added protection for this 
product (receiver) during a lightning storm, or 
when it is left unattended and unused for long 
periods of time, unplug it from the wall outlet 
and disconnect the antenna or cable system. 
This will prevent damage to the product due to 
lightning and power-line surges. 17. Overheating: Don’t expose this unit to 
direct sunlight. Keep away the heating sources 
or equipments.
  •  After placing PDP screen in warm 
place after hold place, you need to let it get dry 
during at least 2 hours before plug-in. •  Do not place PDP screen in hot, dry, cold 
and dusty places.  •  Do not place PDP screen near the source 
of strong magnetic field.  •  Do not allow vibration to influence to 
PDP’s work.  •  Do not put any object on the PDP screen. 
All images provided herein are schematic 
drawings of real objects and may differ 
from their real images.
 
						

							6
Connection
Outdoor Antenna ConnectionUse 75Ω coaxial cable plug or 300-75Ω 
impedance converter to plug in antenna input 
terminal on the rear of the cabinet.
Other connections•  Connect the audio sources to the proper 
stereo audio input jacks ‘L’ and ‘R’. •  Connect the video source to the video 
input jack by RCA cable. •  Connect the video source to the S-Video 
input jack of the monitor by the S-video cable 
(provided that the video source has S-video 
output jack). •  When using the TV as a computer screen, 
connect the PC to the VGA jack from the 
monitor by the relevant cable. •  This unit has PC audio in jack. Connect 
this jack to PC main unit with related audio 
cable in PC mode and adjust the volume to 
Connection
what you want. •  If the video source has a HDMI output 
jack, you can connect the signal to this unit by 
the HDMI cable. •  Connect an external device (e.g., VCR-/
DVD-recorder) to the proper Audio/Video 
output jacks of this unit with AV RCA cable. •  Component input Y/Pb/Pr is intended for 
receiving component video signal if connected 
to the component output of external signal 
source.
75 Ohm co-axis cable
TVRF antenna jack
Antenna cable connector
Downloaded From TV-Manual.com Manual” 
						

							7
Operation
Control elements    
Front panel
Back panel
1
2
3
4
5
6
7
8
3
4
5
6
7
8 9
10
11
12
13
14
15
1
2
1. Stereo audio input 2 (Left+Right)
2. Video input 2
3. HDMI1 and HDMI2 inputs
4. PC audio input
5. Component video (YPbPr) 1 input
6. Component audio 1 input (R+L)
7. Component audio 2 input (R+L)
8. Component video (YPbPr) 2 input
9. RF antenna input
10. VGA input
11. Stereo audio output (R+L)
12. Video output
13. S-Video input
14. Video input 1
15. Stereo audio input 1 (Left+Right)
1. CH+ button
2. CH- button
3. VOL+ button
4. VOL- button
5. MENU button
6. TV/AV button
7. IR-sensor
8. POWER button
Downloaded From TV-Manual.com Manual” 
						

							89
OperationOperation
Remote controller (RC)
1.  POWER button
2.  Number buttons
3.  SOURCE/REVEAL button
4.  SIZE/ZOOM button
5.  MENU button
6.  ENTER button/cursor buttons (
//
/)
7.  VOL+/VOL- buttons
8.  SLEEP button
9.  Green button
10. Red button  11. TEXT button
12. HOLD button
13. PIP/CANCEL button
14. INFO/INDEX button
15. 
 button
16. AUDIO button
17. RECALL button
18. EXIT button
19. CH+/CH- buttons
20. 
 button
21. Yellow button
22. Blue button
23. E/W button
24. SUBPAGE button
Changing the battery1.  Remove the battery compartment cover 
on the back of the RC. 2.  Insert the batteries into the battery 
compartment making sure that the correct 
polarity is observed. 3.  Install the cover back.
•  Use two AAA batteries for the RC. The RC 
should be pointed at remote sensor within 8 
meters and within 30 degrees at the left or the 
right side. •  Take the battery out of the RC if it is not 
used for a long time. •  Do not mix new and used batteries or 
different types of batteries. Weak batteries can 
leak and severely damage the RC. •  Do not expose the RC to shock, liquids, 
and do not place it in an area with high 
humidity.
1 23
1
2
3
4
5
6
7
8
10   9
11
12
13 14
15
16
17
18
19
20
21
22
23
24
Downloaded From TV-Manual.com Manual” 
						

							89
OperationOperation
General operations
•  Press POWER button on the unit or on the 
RC to switch on the power. Press POWER button 
again to switch the unit into standby mode. •  Press VOL- button repeatedly to decrease 
the volume; press VOL+ button repeatedly to 
increase the volume.
•  Press 
 button to cut off sound, press this 
button again or adjust volume to resume sound. •  Press SLEEP button repeatedly to set the 
sleep time (from 0 to 120 min). When sleep 
time is set, press this button to display the time 
remaining until the auto turn off. •  Press AUDIO button in TV mode 
repeatedly to switch between Stereo, Nicam 
Stereo, Mono, Dual I and Dual II sound modes 
(can be unavailable for some channels). •  Press SOURCE button on the RC or TV/
AV button on the unit, then press 
/ 
cursor buttons to cycle through the available 
source list as follows: TV - AV1 - AV2 - S-Video 
- YPbPr1 - YPbPr2 - HDMI1 - HDMI2 - PC. •  Select the TV function mode. Press 
CH-/CH+ buttons to select previous or next 
channels; or press number buttons to enter a 
channel number from 0 to 235 directly. •  Press RECALL button on the RC to select 
from the present channel and the previously 
displayed channel. •  Press 
 button to select «Favorite On» 
or «Favorite Off». When «Favorite On» is 
selected, press CH+/CH- buttons to select 
favorite channels. •  Press INFO button to display the preset 
TV channel play information. •  Press PIP button to switch on or off PIP 
(Picture In Picture) function.
Teletext operations (option)Select a TV channel in order to pick up 
the picture signal of Teletext. Teletext button 
functions are as follows: TEXT: Press TEXT button to enter into 
TEXT mode. Press this button again to enter 
mixed mode. Press the button again to return  to the channel you are watching. Press 
/ buttons or number buttons to select 
teletext pages. HOLD: Press this button to stop the move 
to the next page. Press this button again to 
cancel operation. INDEX: Press this button to go to the index 
page. SIZE: Press this button to enlarge the top 
part of the page. Press this button again to 
enlarge the bottom part of the page. Press this 
button third time to normal size text page view. REVEAL: Press this button to reveal the 
cancelled information. Press this button again 
to cancel the information. SUBPAGE: Press this button to select sub-
page. Input the number of sub-page and use 
numeric buttons in the format 0001 for sub 
page 1. The teletext will search for the sub 
page. Press SUBPAGE button again to exit the 
subpage mode. Red/Green/Yellow/Blue buttons: Press 
these 4 color buttons to access directly to 
corresponding color page displayed at the 
lower parts of teletext screen.
OSD operation
Press MENU button to enter the OSD 
menu. Use 
/ buttons to select a setting 
page. Press / buttons to go to the 
needed item, then use 
/ buttons to select 
available setting or to adjust the selected item. 
Press ENTER button to confirm After setting, press EXIT button to exit menu.
Downloaded From TV-Manual.com Manual” 
						

							10
Operation
Picture setting
Picture
Contrast
Brightness
Tint
Saturation
Sharpness
Colour Temp
Picture mode
3D NR
•  Contrast
•  Brightness
•  Tint: adjust the tone of color when your 
system is in NTSC. •  Saturation
•  Sharpness
•  Colour Temperature: Normal/Warm/Cool.
•  Picture Mode: User/Standard/Soft/Vivid.
•  3D Noise Reduction: Digital noise 
reduction effect for reducing the video noise 
level: Off/Low/Middle/High.
Sound setting
Sound
Equalizer
Volume
Balance
Sound mode
AVC
Surround
•  Equalizer: adjust sound frequencies 
according to your preference. •  Volume
•  Balance: adjust output between left and 
right speakers. •  Sound Mode: Standard/Theatr/Music/User.
•  AVC : set the auto volume leveller on/off.
•  Surround: set the surround effect on/off.
Function setting
Function
Language
Blue screen
Power Manage
Panel lock
Transparency
PIP Setting
Reset
•  Language: select an OSD menu language.
•  Blue Screen: select On/Off. Selecting On 
means the screen background colour could be 
in blue if there is no signal. •  Power Manage: select the period for 
automatic stand-by of the unit if no operation is 
made: 2, 3, 4 hours or off. •  Panel lock: select On to lock all buttons 
on the unit panel. To unlock the buttons select 
Off or press and hold CH+/CH- buttons for 5 
seconds. •  Transparency: set the level of the OSD 
window transparence. •  PIP setting:
Mode: switch PIP function on/off.
Source: select PIP source (TV/AV/S-Video).
Position: adjust the PIP window position.
•  Reset: setting to the factory default.
Timer setting
Timer
Current time
Off time
On time
On channel
Timer mode
Downloaded From TV-Manual.com Manual”