Hyundai H Pdp4205 Instruction Manual

ТЕЛЕВИЗОР ЦВЕТНОГО ИЗОБРАЖЕНИЯ
С ПЛАЗМЕННЫМ ЭКРАНОМ
PLASMA TV
Руководство по эксплуатации 
Instruction manual
H-PDP4205
 

Table of contents 
Before you start 
Utilization of the product 
Important safeguards
Connection
ConnectionOutdoor antenna connection
Other connections
Operation
Control elements  Front panel
 Back panel
Remote controller Changing the battery
General operations  Teletext operations
OSD operation Picture setting
Sound setting
Function setting
Timer setting
Channel setting
PC setup
General information
Troubleshooting Causes of interference
Accessories
Specifications
2 3
Table of contentsBefore you start...

23
Table of contentsBefore you start
If you want to dispose this product, do not mix it with general household waste. There is 
a separate collection system for used electronic products in accordance with legislation 
that requires proper treatment, recovery and recycling. Please contact your local authorities for the correct method of disposal. By doing so, 
you will ensure that your disposed product undergoes the necessar y treatment, recovery 
and recycling and thus prevent potential negative effects...

4
Before you start
instructions should be followed.2. Retain Instructions: The safety and 
operating instructions should be retained for 
future reference. 3. Heed Warnings: All warnings on the 
product and in the operating instructions 
should be adhered to. 4. Accessories, Carts, and Stands: Do 
not place this product on a slippery or tilted 
surface, or on an unstable cart, stand, tripod, 
bracket, or table. The product may slide or 
fall, causing serious injury to a child or adult, 
and serious...

5
Before you start
not be blocked by placing the product on a bed, 
sofa, rug, or other similar surface. This product 
should not be placed in a built-in installation 
such as a bookcase or rack unless proper 
ventilation is provided or the manufacturer’s 
instructions have been adhered to.14. Overloading: Do not overload wall outlets 
and extension cords as this can result in a risk 
of fire or electric shock.  15. Cleaning: Unplug this product from the 
wall outlet before cleaning. Do not use liquid...

6
Connection
Outdoor Antenna ConnectionUse 75Ω coaxial cable plug or 300-75Ω 
impedance converter to plug in antenna input 
terminal on the rear of the cabinet.
Other connections•  Connect the audio sources to the proper 
stereo audio input jacks ‘L’ and ‘R’. •  Connect the video source to the video 
input jack by RCA cable. •  Connect the video source to the S-Video 
input jack of the monitor by the S-video cable 
(provided that the video source has S-video 
output jack). •  When using the TV as a...

7
Operation
Control elements    
Front panel
Back panel
1
2
3
4
5
6
7
8
3
4
5
6
7
8 9
10
11
12
13
14
15
1
2
1. Stereo audio input 2 (Left+Right)
2. Video input 2
3. HDMI1 and HDMI2 inputs
4. PC audio input
5. Component video (YPbPr) 1 input
6. Component audio 1 input (R+L)
7. Component audio 2 input (R+L)
8. Component video (YPbPr) 2 input
9. RF antenna input
10. VGA input
11. Stereo audio output (R+L)
12. Video output
13. S-Video input
14. Video input 1
15. Stereo audio input 1 (Left+Right)
1. CH+...

89
OperationOperation
Remote controller (RC)
1.  POWER button
2.  Number buttons
3.  SOURCE/REVEAL button
4.  SIZE/ZOOM button
5.  MENU button
6.  ENTER button/cursor buttons (
//
/)
7.  VOL+/VOL- buttons
8.  SLEEP button
9.  Green button
10. Red button  11. TEXT button
12. HOLD button
13. PIP/CANCEL button
14. INFO/INDEX button
15. 
 button
16. AUDIO button
17. RECALL button
18. EXIT button
19. CH+/CH- buttons
20. 
 button
21. Yellow button
22. Blue button
23. E/W button
24. SUBPAGE button
Changing the...

89
OperationOperation
General operations
•  Press POWER button on the unit or on the 
RC to switch on the power. Press POWER button 
again to switch the unit into standby mode. •  Press VOL- button repeatedly to decrease 
the volume; press VOL+ button repeatedly to 
increase the volume.
•  Press 
 button to cut off sound, press this 
button again or adjust volume to resume sound. •  Press SLEEP button repeatedly to set the 
sleep time (from 0 to 120 min). When sleep 
time is set, press this button to...

10
Operation
Picture setting
Picture
Contrast
Brightness
Tint
Saturation
Sharpness
Colour Temp
Picture mode
3D NR
•  Contrast
•  Brightness
•  Tint: adjust the tone of color when your 
system is in NTSC. •  Saturation
•  Sharpness
•  Colour Temperature: Normal/Warm/Cool.
•  Picture Mode: User/Standard/Soft/Vivid.
•  3D Noise Reduction: Digital noise 
reduction effect for reducing the video noise 
level: Off/Low/Middle/High.
Sound setting
Sound
Equalizer
Volume
Balance
Sound mode
AVC
Surround
•...