Hyundai H Led24v8 Instruction Manual

LED TV
Руководство по эксплуатации 
Instruction manual
H-LED24V8
ТЕЛЕВИЗОР
ЦВЕТНОГО ИЗОБРАЖЕНИЯ
ЖИДКОКРИСТАЛЛИЧЕСКИЙ (LCD)
 

Table of contents 
Before you start 
Utilization of the product 
Important safeguards
InstallationWall mounting
Stand installation
Connection
Connection Outdoor antenna connection
Other connections
Operation
Control elements  Front panel
 Back panel
Remote controller Changing the battery
General operations Game
Signal sources
OSD operation Picture setting
Sound setting
Setup page
 Channel setting App setting
USB operation File playback
General information
Troubleshooting Causes of interference...

23
Table of contentsBefore you start
If you want to dispose this product, do not mix it with general household waste. There is 
a separate collection system for used electronic products in accordance with legislation 
that requires proper treatment, recovery and recycling. Please contact your local authorities for the correct method of disposal. By doing so, 
you will ensure that your disposed product undergoes the necessar y treatment, recovery 
and recycling and thus prevent potential negative effects...

4
Before you start
in a well-ventilated location. Keep it away from 
the burning-light, direct sunlight, vibration, 
high-temperature and humidity.•  Do not place any vase, potted plant, cup, 
medicine and any container with water on this 
product. If the liquid is spilt, it may cause the 
fire, electric shock or breakdown. •  Do not install it at the place on the strong 
magnetic field or current field. It may cause 
break down. This equipment may be observed 
deterioration of the picture by...

5
Connection
Connection
Outdoor Antenna Connection
Use 75Ω coaxial cable plug or 300-75Ω 
impedance converter to plug in antenna input 
terminal on the rear of the cabinet.
Other connections•  Connect a TV or CATV antenna to the 
antenna jack. •  Connect a video source to the Composite 
video input jack with RCA cable (not included). •  Connect an audio source to the proper 
Audio input jacks (left and right). •  Connect the included DC adapter to the 
DC input of this unit. •  When using the unit as a...

6
Operation
Control elements    
Front panel
1
2
  1. IR sensor
  2. Power indicator
1. POWER button
2. PROGRAM+/- buttons
3. VOLUME+/- buttons
4. MENU button
5. SOURCE button
6. USB port
7. Composite video input-1
8. Audio stereo input-1
9. RF antenna jack
10. Component video input
11. Composite video/audio output 
12. HDMI input
13. VGA input
14. Composite video/audio input-2
15. DC adaptor input
Back panel
1 2 345
6
7
8
9
10
11
12
13
14
15
DC IN
Downloaded From TV-Manual.com Manual” 

7
Operation
Remote controller (RC)
1
2
3
4
5
6
7
8
9
10 11
12
13
14
15
16
17
18
19
1.  SOURCE button
2.  Number buttons (Alphabetic function is 
unavailable for this model)
3.  DISPLAY button
4.  P.EFFECT button
5.  ZOOM button
6.  F1 button
7.  F2 button
8.  VOL
/VOL buttons
9.  MENU button 10. Cursor (UP/DOWN/LEFT/RIGHT) buttons/
OK button 
11. POWER button
12. RETURN button
13. S.EFFECT button
14. SLEEP button
15. F4 button
16. F3 button
17. CH
/CH buttons
18.  button
19. EXIT button
Changing the...

89
OperationOperation
General operations
•  Press POWER button on the unit or on the 
RC to switch on the unit from standby mode. 
When the unit is on, press POWER button on 
the RC to switch the unit to standby. •  Press VOLUME- button on the unit or VOL
 button on the RC repeatedly to decrease the 
volume; press VOLUME+ button button on the 
unit or VOL
 button on the RC repeatedly to 
increase the volume. •  Press SLEEP button repeatedly to set the 
sleep time period (5 min - 10 min - 15 min - 30 
min...

89
OperationOperation
Picture setting
PictureBrightness
Select Adjust Back
App
Flesh tone
Channel
Color tone
Sound Contrast
Setup Color
Sharpness
•  
Brightness,  Contrast, Color, Sharpness, 
Tint (tint available only for NTSC system). •  Color tone: Select color temperaure mode 
of the picture - Normal/Warm/Cool. •  Flesh tone: correct the color of the image.
Sound setting
Sound Volume
Select Adjust Back
Picture
Surround
App
AVC
Setup Balance
Channel Equalizer
Mode
•  Volume: adjust sound volume level....

10
Operation
App setting
AppDNR
Select Adjust Back
Channel
SW upgrade
Setup
USB setup
Picture Backlight
Sound ALC
Time
•  DNR: Digital noise reduction effect for 
reducing the video noise level: Off/On, if the 
broadcast signal received is weak.
•  Back light: select Normal, Sunshine or 
Energy saving mode of backlight. •  ALC: use this function to obtain a better 
image quality.  •  Time: set the auto turn-off timer.
•  USB setup
Pic.Repeat: select picture repeat mode.
Pic. Interval: select picture...