Hyundai H Led24v8 Instruction Manual

							LED TV
Руководство по эксплуатации 
Instruction manual
H-LED24V8
ТЕЛЕВИЗОР
ЦВЕТНОГО ИЗОБРАЖЕНИЯ
ЖИДКОКРИСТАЛЛИЧЕСКИЙ (LCD)
 
						

							Table of contents 
Before you start 
Utilization of the product 
Important safeguards
InstallationWall mounting
Stand installation
Connection
Connection Outdoor antenna connection
Other connections
Operation
Control elements  Front panel
 Back panel
Remote controller Changing the battery
General operations Game
Signal sources
OSD operation Picture setting
Sound setting
Setup page
 Channel setting App setting
USB operation File playback
General information
Troubleshooting Causes of interference
Accessories
Specifications
2 3
Table of contentsBefore you start
Dear customer!Thank you for purchasing our product. For safety, it is strongly recommended to read 
this manual carefully before connecting, operating and/or adjusting the product and keep 
the manual for reference in the future.
2
3
3
3
4
4
4
5
5
5
5
6
6
6
6
7
7
8
8
8
8
9
9
9
9
10
10
10
11
11
11
12
12
Downloaded From TV-Manual.com Manual” 
						

							23
Table of contentsBefore you start
If you want to dispose this product, do not mix it with general household waste. There is 
a separate collection system for used electronic products in accordance with legislation 
that requires proper treatment, recovery and recycling. Please contact your local authorities for the correct method of disposal. By doing so, 
you will ensure that your disposed product undergoes the necessar y treatment, recovery 
and recycling and thus prevent potential negative effects on the environment and human 
health.
Utilization of the product
Important safeguards
•  Before connecting the AC power cord 
to the DC adapter outlet, make sure that 
the voltage designation of the DC adapter 
corresponds to the local electrical supply.
•  Accessories include a DC adaptor SAWA-
12-50012. Do not use other adaptors with this 
unit. •  Please unplug the power cord from the AC 
outlet and contact a service center for repair 
if following occurs: any obvious abnormality 
appears in the unit, such as smoky, peculiar 
smell or strange sound; liquid has been spilled or 
other objects have fallen into the unit; no picture 
or sound; cover or panel is broken; although you 
have operated the unit following the operating 
instructions, it still cannot work normally. •  This unit should only be connected to a 
wall socket having grounding. •  Always disconnect the power cord and 
antenna during a storm. •  Do not fix the power cord with a metal nail.
•  Unplug the power cord from the AC outlet; 
also unplug the signal cables from the input 
ports when the unit is unused for long periods 
of time. •  When unplugging the plug, always hold 
the wide slot, do not touch the metal part, and 
do not destroy, refit, twist, pull or roast the 
power cord. •  Please contact the service center 
immediately if you found that the core is  showed in the air or has been broken.
•  Please replace the AC outlet if the metal 
bolt cannot be inserted into the power socket 
completely or it cannot be fastened even when 
it was pushed in, otherwise, any accidents of 
shocks and fires would happen. •  Never touch the antenna lie or power plug 
if it stars to thunder. •  Do not touch the power plug with wet 
hands. •  Do not use any non-rated power socket 
with numerous devices jointed on one power 
socket or cable device. The wire of non-
designated capacity may cause the fire due to 
the generation of heat. •  All instructions must be read and 
understood well before you operate the unit. 
Heed all warnings and follow all instructions. •  Please use the accessories provided 
by the manufacturer. Using inadequate 
accessories may result in accidents. •  Please adjust the product through the 
panel buttons or the remote controller, do 
not remove the cover or attempt to service 
the product by yourself. Do not disassemble 
back cover and do not make maintenance by 
yourself to avoid the electric shock. •  Over-press the panel may destroy the 
product. •  Do not place the product on an unstable 
cart, stand surface, tripod, bracket, or table. 
The product may fall, causing serious accidents 
as well as the damage to the product.  •  Please place the product on a flat surface 
Downloaded From TV-Manual.com Manual” 
						

							4
Before you start
in a well-ventilated location. Keep it away from 
the burning-light, direct sunlight, vibration, 
high-temperature and humidity.•  Do not place any vase, potted plant, cup, 
medicine and any container with water on this 
product. If the liquid is spilt, it may cause the 
fire, electric shock or breakdown. •  Do not install it at the place on the strong 
magnetic field or current field. It may cause 
break down. This equipment may be observed 
deterioration of the picture by electromagnetic 
radiation in electromagnetic environment. •  Fasten the wheel of the product or shelf 
with wheels when installing this product. If it 
moves or is tipped over, it may be damaged. •  Do not place any fire source such as 
candlelight close to this product or place it on 
this product. If it is tipped over or fallen down, it 
may cause damage or fire. •  Do not place the unit into closed space 
of TV for better ventilation; it can reduce the 
product lifetime. Keep a space at least 10 cm 
at above, left and right of the TV. •  Please place all the signal cords behind of 
rear panel. •  Do not overexert or touch the panel when 
you convey the product. Do not transfer the 
LCD TV up or down display direction. •  Do not transport it with the power cord 
or the connection cable connected. If you 
move this product with the power cord or the 
connection cable connected, the damaged 
power cord, connection cable or connection 
terminal may cause the fire, the electric shock 
or breakdown. •  2 persons or more shall transport the 
device, which is heavier than 18 kg. If you drop 
or tip over the device, it may damage it. •  The temperature of the product’s body 
becomes a little higher after a long period use. 
This phenomenon indicates that heat exchange 
in normal working mode, thus please do not 
let children or anyone who is sensitive of 
temperature to touch.
All images provided herein are schematic 
drawings and may differ from of real objects.Installation
Wall mounting
For wall mounting the back panel of this 
unit is equipped with 4 screw holes (4 mm 
diameter, 200 mm horizontal spread distance 
x 200 mm vertical spread distance). A 
wall-mount bracket should be used for wall 
mounting (the bracket is not included and 
should be acquired separately). Manufacturer 
is not responsible for improper mounting 
resulting in damage of the unit.
Stand installation1. Insert the decorator roll into the support:
2. Fix the support to the base with 3 screws:
3. Place the LED TV on a solid flat surface. 
Use soft material to place over the front screen 
to avoid any damage. Then insert the stand into 
the slit in the bottom part of the cabinet and fix 
the two parts with 2 screws:
Downloaded From TV-Manual.com Manual” 
						

							5
Connection
Connection
Outdoor Antenna Connection
Use 75Ω coaxial cable plug or 300-75Ω 
impedance converter to plug in antenna input 
terminal on the rear of the cabinet.
Other connections•  Connect a TV or CATV antenna to the 
antenna jack. •  Connect a video source to the Composite 
video input jack with RCA cable (not included). •  Connect an audio source to the proper 
Audio input jacks (left and right). •  Connect the included DC adapter to the 
DC input of this unit. •  When using the unit as a computer screen, 
connect the PC to the VGA jack of the unit by 
the relevant cable to get the video signal from 
the PC. For audio signal from the PC, connect 
the left and right jacks of the AV2 of this unit  to the audio output jack of the PC by using 
relevant connector (not included).
•  If the video source has a HDMI output 
jack, you can connect the signal to the unit by 
HDMI cable (not included). •  Component input is intended for receiving 
component video signal if connected to the 
component output of external signal source. •  Connect an external device (e.g., VCR-/
DVD-recorder) to the proper Audio/Video 
output jacks of this unit with AV RCA cable (not 
included).
75 Ohm co-axis cable
TVRF antenna jack
Antenna cable connector
Downloaded From TV-Manual.com Manual” 
						

							6
Operation
Control elements    
Front panel
1
2
  1. IR sensor
  2. Power indicator
1. POWER button
2. PROGRAM+/- buttons
3. VOLUME+/- buttons
4. MENU button
5. SOURCE button
6. USB port
7. Composite video input-1
8. Audio stereo input-1
9. RF antenna jack
10. Component video input
11. Composite video/audio output 
12. HDMI input
13. VGA input
14. Composite video/audio input-2
15. DC adaptor input
Back panel
1 2 345
6
7
8
9
10
11
12
13
14
15
DC IN
Downloaded From TV-Manual.com Manual” 
						

							7
Operation
Remote controller (RC)
1
2
3
4
5
6
7
8
9
10 11
12
13
14
15
16
17
18
19
1.  SOURCE button
2.  Number buttons (Alphabetic function is 
unavailable for this model)
3.  DISPLAY button
4.  P.EFFECT button
5.  ZOOM button
6.  F1 button
7.  F2 button
8.  VOL
/VOL buttons
9.  MENU button 10. Cursor (UP/DOWN/LEFT/RIGHT) buttons/
OK button 
11. POWER button
12. RETURN button
13. S.EFFECT button
14. SLEEP button
15. F4 button
16. F3 button
17. CH
/CH buttons
18.  button
19. EXIT button
Changing the battery1.  Remove the battery compartment cover 
on the back of the RC. 2.  Insert the batteries into the battery 
compartment making sure that the correct 
polarity is observed. 3.  Install the cover back.
•  Use two AAA batteries for the RC. The RC 
should be pointed at remote sensor within 8 
meters and within 30 degrees at the left or the 
right side.
•  Take the battery out of the RC if it is not 
used for a long time. •  Do not mix new and used batteries or 
different types of batteries. Weak batteries can 
leak and severely damage the RC. •  Do not expose the RC to shock, liquids, 
and do not place it in an area with high 
humidity.
1 23
 
						

							89
OperationOperation
General operations
•  Press POWER button on the unit or on the 
RC to switch on the unit from standby mode. 
When the unit is on, press POWER button on 
the RC to switch the unit to standby. •  Press VOLUME- button on the unit or VOL
 button on the RC repeatedly to decrease the 
volume; press VOLUME+ button button on the 
unit or VOL
 button on the RC repeatedly to 
increase the volume. •  Press SLEEP button repeatedly to set the 
sleep time period (5 min - 10 min - 15 min - 30 
min - 60 min - 90 min - 120 min). •  Press RETURN button on the RC to select 
from the present channel and the previously 
displayed channel. •  Press 
 button to cut off sound, press 
this button again or adjust volume to resume 
sound. •  In TV mode press CH
/CH buttons on 
the RC or PROGRAM+/- buttons on the unit to 
select previous or next channel; or press number 
buttons to enter a channel number directly. •  Press P.EFFECT button repeatedly to 
cycle through the available video picture 
modes from the following types: Normal => 
Dynamic => Soft => Custom. •  Press S.EFFECT button repeatedly to 
cycle through the available sound modes from 
the following types: Stereo => Movie => Music 
=> News. •  Press DISPLAY button to display the 
preset TV channel information. •  In TV mode press F1 button to switch 
NICAM sound mode (not available for some 
channels).
Game•  In all modes except USB, press F2 button 
to switch on the game. •  The task of the game is to push yellow 
boxes into blue frame. When this is done, 
the mission in completed and the game 
automatically goes to the next mission level 
(total 20 levels). •  Press cursor buttons to move the box. 
Press OK to undo the previous step. Press VOL
/VOL buttons to select the mission level. 
Press EXIT button or F2 button to exit the game.
Signal sourcesPress SOURCE button, then press DOWN/
UP cursor buttons on the RC to select a source 
from available source list: TV => AV1 => AV2 
=> YPbPr => HDMI => PC => USB. Press OK 
button on the RC or MENU button on the panel 
to confirm.
OSD operation
1. Press MENU button to enter the setting 
menu displayed on the screen. 2. Press UP/DOWN cursor buttons on the 
RC or PROGRAM+/- buttons on the panel to 
select setting page. 3. Press RIGHT cursor button or OK button 
on the RC or VOLUME+ button on the panel to 
go to the parameter list. 4. Press UP/DOWN cursor buttons on the 
RC or PROGRAM+/- buttons on the panel to 
select a parameter to adjust. 5. Press LEFT/RIGHT cursor buttons on 
the RC or VOLUME+/- buttons on the panel to 
adjust the selected parameter. 6. Press MENU button to return to the 
previous menu page. Press EXIT button on the 
RC to quit the menu.
  Some menu items may be in grey color, 
in this case they are not adjustable. Pictures 
of OSD menu are for reference only; they may 
differ from the real screens.
Downloaded From TV-Manual.com Manual” 
						

							89
OperationOperation
Picture setting
PictureBrightness
Select Adjust Back
App
Flesh tone
Channel
Color tone
Sound Contrast
Setup Color
Sharpness
•  
Brightness,  Contrast, Color, Sharpness, 
Tint (tint available only for NTSC system). •  Color tone: Select color temperaure mode 
of the picture - Normal/Warm/Cool. •  Flesh tone: correct the color of the image.
Sound setting
Sound Volume
Select Adjust Back
Picture
Surround
App
AVC
Setup Balance
Channel Equalizer
Mode
•  Volume: adjust sound volume level.
•  Balance: adjust balance between left and 
right speaker. •  Equalizer: adjust the equalizer.
•  AVC : set the auto volume correction on/
off. •  Mode: News/Music/Movie/Stereo.
•  Surround: set surround sound effect on/off.
Setup page
Setup Language
Select Adjust Back
Sound
Reset
Picture
Child lock Melody
Channel Color system
App Sound system
Blue back
•  Language: select the language of the 
OSD menu. •  Color system: PAL/SECAM.
•  Sound system: D/K, B/G.
•  Blue back: set on or off blue screen 
activation when no signal. •  Melody: select a start-up sound when the 
TV is turned on. •  Child lock: select ON to lock all buttons 
on the panel (except POWER button). Set OFF 
to unlock the buttons. •  Resetting: reset the parameters to initial 
factory settings. 
Channel setting
Channel Fine tune
Select Adjust Back
Setup
Channel edit
Sound
App
Auto store
Picture Manual store
•  Fine tune: adjust the current frequency 
manually to improve the quality of signal if it is 
too week. •  Channel edit:
Swap: press cursor buttons or number 
buttons to select Current channel and Aid 
channel to be swapped. Select Swap item and 
press OK button to confirm swapping. Skip: select a channel with cursor buttons 
or number buttons. Select Skip item and press 
OK button to confirm. Now this channel will 
be skipped when next/previous channels are 
selected. •  Auto store: select this item and press OK 
button to start automatic seach and storing of 
available channels. To quit searching, press 
MENU button. •  Manual search: in this submenu, select 
PR Start to select the channel you want to 
search. Press left or right cursor button to 
search manually down or up the band. To quit 
searching, press MENU button.
Downloaded From TV-Manual.com Manual” 
						

							10
Operation
App setting
AppDNR
Select Adjust Back
Channel
SW upgrade
Setup
USB setup
Picture Backlight
Sound ALC
Time
•  DNR: Digital noise reduction effect for 
reducing the video noise level: Off/On, if the 
broadcast signal received is weak.
•  Back light: select Normal, Sunshine or 
Energy saving mode of backlight. •  ALC: use this function to obtain a better 
image quality.  •  Time: set the auto turn-off timer.
•  USB setup
Pic.Repeat: select picture repeat mode.
Pic. Interval: select picture changing interval.
Photo mode: select Photo mode.
Sound repeat: select Sound repeat mode.
•  SW upgrade: this operation should be 
performed by qualified personnel only.
USB operation
Insert a USB into the USB jack. Select USB 
source and press OK button. The screen will 
show a USB playback window:
File MusicPhotoText
123 4
5 67
1. Selection of all files
2. Selection of music files
3. Selection of photo files
4. Selection of text files
5. Storage content window
6. Scroll bar
7. File preview window
  USB file systems supported: FAT, 
FAT32 (if the file does not exceed 3 Gb). 2.0 
USB version is supported. For correct and 
satisfactory operation, licensed USB devices 
of famous brands should be used with this unit. 
Avoid using USB devices of unknown brands. 
Playback of images and music of only JPEG 
and MP3 format is supported.
File playback•  Press EXIT button, then press LEFT/
RIGHT cursor buttons to select file type (file/
music/photo/text). Press OK button to confirm 
selection. The storage content window will 
show the list of files of the selected type. •  Press UP/DOWN direction buttons to 
select the needed file. Press OK button to play 
the selected file. •  Press ZOOM button to change the size of 
the image (for photo files). •  Press LEFT/RIGHT cursor buttons to fast 
reverse or fast forward (for music files). •  Press F2 button to go to preview mode.
Downloaded From TV-Manual.com Manual”