Hyundai H Led19v8 Instruction Manual

LED TV
Руководство по эксплуатации 
Instruction manual
H-LED19V8
ТЕЛЕВИЗОР
ЦВЕТНОГО ИЗОБРАЖЕНИЯ
ЖИДКОКРИСТАЛЛИЧЕСКИЙ (LCD)
ME61
Downloaded From TV-Manual.com Manual” 

Table of contents 
Before you start 
Utilization of the product 
Important safeguards
InstallationStand installation
Connection
Connection Outdoor antenna connection
Other connections
Operation
Control elements  Front panel
 Back panel
Remote controller Changing the battery
General operations Teletext operations
OSD operation Picture setting
Sound setting
Setting page
 Geometry setting Channel setting
USB operation General information
File playback
General information
Troubleshooting Causes of...

23
Table of contentsBefore you start
If you want to dispose this product, do not mix it with general household waste. There is 
a separate collection system for used electronic products in accordance with legislation 
that requires proper treatment, recovery and recycling. Please contact your local authorities for the correct method of disposal. By doing so, 
you will ensure that your disposed product undergoes the necessar y treatment, recovery 
and recycling and thus prevent potential negative effects...

4
Before you start
•  Please place the product on a flat surface 
in a well-ventilated location. Keep it away from 
the burning-light, direct sunlight, vibration, 
high-temperature and humidity. •  Do not place any vase, potted plant, cup, 
medicine and any container with water on this 
product. If the liquid is spilt, it may cause the 
fire, electric shock or breakdown. •  Do not install it at the place on the strong 
magnetic field or current field. It may cause 
break down. This equipment may be...

5
Connection
Connection
Outdoor Antenna Connection
Use 75Ω coaxial cable plug or 300-75Ω 
impedance converter to plug in antenna input 
terminal on the rear of the cabinet.
Other connections•  Connect a video source to the Composite 
video input jack with RCA cable (not included). •  Connect an audio source to the proper 
Audio input jacks (left and right). •  Connect the included DC adapter to the 
DC input of this unit. •  When using the unit as a computer screen, 
connect the PC to the VGA jack of the...

6
Operation
Control elements    
Front panel
1
2
  1. IR sensor
  2. Power indicator
1. POWER button
2. CH+/- buttons
3. VOL+/- buttons
4. MENU button
5. SOURCE button
6. USB port
7. Audio stereo input-2
8. Composite video input-2
9. DC adaptor input
10. HDMI input
11. Component video input
12. Audio input for VGA and component video
13. Coaxial output (SPDIF)
14. Video/audio input-1
15. Composite video/audio output 
16. VGA input
17. RF antenna jack
Back panel
1 2 345
6
7
8
9
10
11
12
1314 15 1617...

7
Operation
Remote controller (RC)
1
2
3
4
5
6
7
8
9
10
11
12 13
14
15
16
17
18
19
20
21
22
Index
Size
Rev.Hold. Sub
1.  button
2. Number buttons
3. INFO button
4. SOURCE button
5. Cursor (UP/DOWN/LEFT/RIGHT) buttons/
OK button
6. TXT button
7. VOL+/VOL- buttons
8. USB button
9. SCALE/SIZE button 10. PICTURE/REV button 
11. MTS button/red button
12. Green button
13. POWER button
14. RETURN button
15. MENU button
16. EXIT button
17. INDEX button
18. CH+/CH- buttons
19. FREEZE/SUB button
20. SOUND/HOLD...

89
OperationOperation
General operations
•  Press POWER button on the unit or on the 
RC to switch on the unit from standby mode. 
When the unit is on, press POWER button on 
the RC to switch the unit to standby. •  Press VOL- button on the unit or on 
the RC repeatedly to decrease the volume; 
press VOL+ button on the unit or on the RC 
repeatedly to increase the volume. •  Press RETURN button on the RC to select 
from the present channel and the previously 
displayed channel. •  Press 
 button to cut...

89
OperationOperation
lower parts of teletext screen.
OSD operation
1. Press MENU button to enter the setting 
menu displayed on the screen. 2. Press UP/DOWN cursor buttons on the 
RC to select setting page. 3. Press OK button on the RC to go to the 
parameter list. 4. Press UP/DOWN cursor buttons on the 
RC to select a parameter to adjust. 5. Press LEFT/RIGHT cursor buttons on the 
RC to adjust the selected parameter. 6. Press MENU button to return to the 
previous menu page. Press EXIT button on the...

10
Operation
•  Language: select the language of the 
OSD menu. •  TXT Language: select the language of the 
teletext subtitles. If selected teletext language 
does not correspond to the program language, 
subtitles can be diplayed incorrectly.  •  Color system: PAL/SECAM/NTSC.
•  Watch time limit: set the period of time for 
you to watch the TV; when the time elapses, 
the TV will switch off automatically. You must 
enter the password first (the default password 
is 0000; you can also assign your own...