Hyundai H Lcd3202 Instruction Manual

							H-LCD3202
LCD TV   @DL?E?
						

							2 Table of contentsTable of contents ......................................................................................................................................... 2
Important safety precautions ........................................................................................................................ 3
General introduction .................................................................................................................................... 5
Accessories.................................................................................................................................................. 5
Controls and connection............................................................................................................................... 6
OSD operations ..........................................................................................................................................10
Troubleshooting..........................................................................................................................................14
The causes of interference...........................................................................................................................14
Specifications .............................................................................................................................................15
Thank you very much for buying our product – the most natural Colour Television Receiver.
To enjoy your set to the full from the very beginning, read this manual carefully and keep it for future refer-
ence. 
						

							3 Important safety precautions Warning
Please unplug the power cord from the AC outlet and contact our service personnel to repair under the fol-lowing conditions:xAny obvious abnormality appears in the product, such as smoky, peculiar smell or strange sound.
xWhen a liquid has been spilled or other objects have fallen into the product.
xNo picture or sound.
xCover or panel is broken.
xAlthough you have operated the product by following the operating instructions, it still cannot work
normally. Warning
Be careful about the power cord or the plug to avoid the fire or the electric shock.xAlways disconnect the power cord and antenna during the storm.
xDo not fix the power cord with the metal nail.
xUnplug the power cord from the AC outlet; also unplug the signal cables from the input ports when the
product is unused for long periods of time or during a lightning storm.
xWhen unplug the plug, always hold the wide slot, do not touch the metal part, and do not destroy, refit,
twist, pull or roast the power cord.
xPlease contact the personnel service immediately if you found that the core is showed in the air or is
been broken.
xPlease replace the AC outlet if the metal bolt cannot be inserted into the power socket completely or it
cannot be fastened even when it was pushed in, otherwise, any accidents of shocks and fires would hap-
pen.
xNever touch the antenna lie or power plug if it stars to thunder.
xDo not touch the power plug with wet hands.
xDo not use any non-rated power socket with numerous devices jointed on one power socket or cable de-
vice. The wire of non-designated capacity may cause the fire due to the generation of heat.
Instructions
All instructions must be read and understood well before you operating this product. Heed all warnings and
follow all instructions.
Attachments
Please use the attachment recommended by the manufacturer. Use the inadequate attachments may result in
accidents.
Adjustment
Please adjust the product through the panel buttons or the remote control, do not remove the cover or attempt
to service the product by yourself. Do not disassemble back cover and do not make maintenance by yourself
to avoid the electric shock.  Caution: Over-press the panel may destroy the product.
Placement
xDo not place the product on an unstable cart, stand surface, tripod, bracket, or table. The product may
fall, causing serious accidents as well as the damage to the product.
xPlease place the product on a flat surface in a well-ventilated location. Keep it away from the burning-
light, direct sunlight, vibration, high-temperature and humidity. Store the product with a temperature
from –200
C ~500
C; Otherwise you may destroy the product.
xDo not place any vase, potted plant, cup, medicine and any container with water on this product. If the
liquid is spilt, it may cause the fire, electric shock or breakdown.
xDo not install it at the place on the strong magnetic field or current field. It may cause break down. This
equipment may be observed deterioration of the picture by electromagnetic radiation in electromagnetic
environment. 
						

							4 xFasten the wheel of the product or shelf with wheels when installing this product. If it moves or is
tipped over, it may be damaged.
xDo not place any fire source such as candlelight close to this product or place it on this product.
If it is tipped over or fallen down, it may cause damage or fire.  Caution: Do not place the LCD TV into closed space of TV for better ventilation; it can reduce the
product lifetime. Keep a space at list 10cm at above, left, and right of the TV.
Remote control
xDo not exp ose the remote control to shock, liquids, and do not place it in an area with high humidit y.
Please use the qualified batteries and do not mix batteries with different types.
xDo not mix old and new batteries, and do not place the batteries to burn or disassemble them. If the re-
mote control is unused for an extend period of time, remove batteries from the remote control.
Cords
Please place all the signal cords behind of rear panel.
Cleaning
xUnplug the power cord from the AC outlet b efor e cleaning the product. Do not use liquid cleaners or
aerosol cleaners and others; use the special LCD Panel cleaners. Keep the power off before LCD panel
dry completely.
xClean the dust on the power plug periodically. Caution:Do not use volatile cleaner or you may damage the LCD Panel/Covers.
Transportation
xDo not overexert or touch the panel when you convey the product. Do not transfer the LCD TV up or
down display direction.
xDo not transport it with the power cord or the connection cable connected. If you move this product
with the power cord or the connection cable connected, the damaged power cord, connection cable or
connection terminal may cause the fire, the electric shock or breakdown.
x2 persons or more shall transport the device, which is heavier than 18 kg. If you drop or tip over the de-
vice, it may damage it.
Other objects
To ensure not to get an electric shock or short circuit, please do not spill liquid or other objects into the venti-
lation holes of the product. Caution:Do not stand on the LCD TV, do not push LCD TV or its’ stand. Keep it away from children.
Heating
The temperature of the product’s body becomes a little higher after a long period use. This phenomenon in-
dicates about heat exchange in normal working mode, thus please do not let children or anyone who is sensi-
tive of temperature to touch.
Note:All the OSD and illustrations in this manual may be somewhat different from the actual situation.
Please take the LCD Color TV menu as the standard. 
						

							5 General introductionxSize of the screen: 32/81 cm
xAspect ratio: 16:9
xScreen resolution: 1366 x 768
xBrightness: 500 cd/m2
xContrast: 2000:1
xWide viewing angle 170º/170º
xResponse time: 8 ms
xProgressive scan
xColor systems: PAL, SECAM
xDigital comb filter
xNICAM Stereo
x“Picture in picture”
xTeletext
xConvenient OSD menu in Russian and English languages
xConnections: 2 HDMI, VGA, component video input, composite video PC audio input, 2 SCART jacks,
RF antenna
xPC monitor compatible
xWide range power supply: 100-240 V, 50/60 Hz
AccessoriesNote:Please keep the wrapping box and the padding well for future convenient use when you convey them.
Please check the accessories. If anything is missed address to the seller.
LCD TVInstruction manual  Power cordRemote control (RC) 
						

							6 Controls and connection   Front panel  Right panel
Top panel button description
ButtonDescriptionAC (Power) switchTurn on the AC switch; the TV will enter into standby mode. When a complete turn-
ing off is required, please turn off the AC switch and unplug the power cable from
the power socket.TV/AVTo switch among the signal source.MENUOpen the menu or switch among the menus.CH+/-In T V mode, decrease/increase channel number. Select functions in menu operation.VOL+/-Decrease/increase the sound volume. Adjust functions in menu operation.POWEREnter or leave the standby mode. 
						

							7 Rear panel
Rear panel terminals and controls
I temsConnection description1  HDMI 1, 2Connect one end of the HDMI cable with HDMI output port, connect the other
end of the HDMI cable with the HDMI port on the TV, and tighten the bolts
clockwise on the each end of HDMI cable.2 VGAConnect one end of the VGA cable with the VGA port on computer, connect the
other end of the VGA cable with the VGA port on the TV, and tighten the bolts
clockwise on the each end of VGA cable.3  PC audio inConnect it to the audio output terminal of PC.4 S-VideoThe output S-Video terminal of DVD can be connected with the S-Video input
port of the TV through S-Video cable.5Component video
inputIt’s convenient to receive the component video signal of high definition from
DVD player. The output Component (YPbPr) terminal of DVD can be con-
nected with the Component (YPbPr) input port of the TV through AV cable.6Composite video in-
putCapable of receiving PAL, NTSC, SECAM color systems; Very convenient to
watch VCR (video cassette recorder), Pickup Camera, other Disc’s programs.
The AV input of the TV can be connected with the output port of other AV
equipment through AV cable.7  L/R inConnect them to audio output terminal of DVD (with VIDEO/S-VIDEO).8 SCARTConnect them to the corresponding terminal of DVD.9  RF antennaThe RF output terminal can be connected with the RF input port of the TV.10AC inputConnect the AC power cable with 100-240V AC power supply. Connect the
other end of the AC power cable with the AC power port on the TV.Notes:
xEnsure that the power to the LCD TV and other connected devices is off before you make any connec-
tions.
xWhen connect, plug directly and slightly to the interface, otherwise you will damage the stitch.
xS-VIDEO and AV cannot be used at same time for they share of one signal channel.
xCheck and make sure that all AV cables are connected with the corresponding ports correctly. 
						

							8Remote control (RC)
1.  POWER button. Press to turn on/off the TV
set or to switch it to standby mode.
2.  MUTE button. Press to turn off/on the sound.
3.  Number buttons. Press to input figures.
4.  LAST CHANNEL button. Press to switch to
the last watched channel.
5.  SYSTEM button. Press to adjust audio pa-
rameters.
6.  NICAM A2 button. Press to turn on/off the
NICAM function.
7.  VOL+/VOL- button. Press to adjust the sound
volume level.
8.  CH+/CH- button. Press to switch between
channels.
9.  DISPLAY button. Press to display infor ma-
tion.
10. CURSOR  (LEFT/RIGHT/UP/DOWN) but-
tons. Press for OSD navigation.
11.  ENTER button. Press to confirm selection or
input data.
12.  EXIT button. Press to exit from the current
menu.
13.  MENU button. Press to display or hide the
OSD menu.
14.  PMODE button. Press to select picture mode.
15. AV/TV button. Press to select the signal
source.
16.  SMODE button. Press to select sound mode.
17.  SLEEP button. Press to set shutting down
time.
18.  TELETEXT buttons:
TEXT: switch between T V/Teletext
HOLD: hold or continue
PGDN: page down
PGUP: page up
INDEX: do to index
SIZE: double height rendering
REVEAL: reveal any hidden text
SUBPAGE: enter subpage
COLOR BUTTONS (RED, GREEN, YELLOW, CYAN) follow colored links in the text.
Insert the batteries in the RC
xRemove the battery cover by pressing the symbol and pulling the cover space in the direction of the ar-
row.
xInsert the two 1.5V (AAA size) batteries making sure the polarity (+ or -) of the batteries matches the
polarity marks inside the unit.
xReplace the battery cover by sliding it in until you hear a click sound. 
						

							9 Note:If the RC doesn’t react to pressing the buttons or the working range was decreased insert the new bat-
teries.
Use of RC
Use the RC by pointing it towards the RC sensor of the set. Objects between the RC and sensor may prevent
proper operation.
Note: The illustration is for your reference only; the remote sensor ma y locate different ly with different
model.
Cautions regarding use of RC
xDo not expose the RC to liquids, and do not place in an area with high humidity.
xDo not install or place the RC under direct sunlight. The heat may cause deformation of the unit.
xThe RC may not work properly if the remote sensor of the main unit is under dir ect sunlight or strong
lighting. In such a case, change the angle of the lighting or LCD TV set, or operate the RC closer to the
remote sensor. 
						

							10 OSD operationsSEARCH Menu (in TV mode)
Press MENU button to display the OSD menu; press UP/DOWN buttons to
select the Search menu, then press RIGHT button to enter the menu. Now
you can use UP/DOWN buttons to select the submenu: Auto Tuning,
Search, Program Edit. Press MENU button to return to the main menu.
Press RIGHT button to enter the submenu.
Auto Tuning
Press UP/DOWN buttons to select Auto Tuning;
press RIGHT button to enter it.
S ys tem: It is conditioned by the Country item.
Auto Search: Press UP/DOWN buttons to select
Auto Search, press RIGHT button to start auto
search.
Country: Press UP/DOWN buttons to select Coun-
try, press LEFT/RIGHT buttons to select the needed
country.
Press ENTER button to confirm and exit the menu.
Note: When auto searching is on, you ca n press
MENU button to stop and return to the preview
menu.
Search
Press UP/DOWN buttons to select Search; press
RIGHT button to enter it:
Channel No.: Press UP/DOWN buttons to select
Channel No., press LEFT/RIGHT buttons to select a
channel number.
Sound System: Press UP/DOWN buttons to select
Sound System, press LEFT/RIGHT buttons to select
sound system of the program.
Color System: Press UP/DOWN buttons to select
Color System, press LEFT/RIGHT buttons to select
color system of the program.
Manual Search: Press UP/DOWN buttons to select
Manual Search, press LEFT/RIGHT buttons to
search backward/forward.
AFT: Press UP/DOWN buttons to select AFT, press LEFT/RIGHT buttons to turn on/off automatic fre-
quency control.
Skip: Press UP/DOWN buttons to select Skip, press LEFT/RIGHT buttons to turn on/off the funct ion of
skip. When the function is on, the current channel will be skipped when you scan channels with CH+/CH-
button.
Fine: Press UP/DOWN buttons to select Fine, press LEFT/RIGHT buttons to fine tuning when the signal of
the current channel is weak.
Name: Press UP/DOWN buttons to select Name, press LEFT/RIGHT buttons to select the position of the
word, press UP/DOWN buttons to select the letter you want.
Press ENTER button to confirm and return to preview menu.