Hyundai H Lcd2202 Instruction Manual

							H-LCD2202
LCD TV  @DL?E?
						

							2 Table of contentsTable of contents ......................................................................................................................................... 2
Important safety precautions ........................................................................................................................ 3
General introduction .................................................................................................................................... 5
Accessories.................................................................................................................................................. 5
Controls and connection............................................................................................................................... 6
OSD operations ........................................................................................................................................... 9
Troubleshooting..........................................................................................................................................11
The causes of interference...........................................................................................................................11
Specifications .............................................................................................................................................12
Thank you very much for buying our product – the most natural Colour Television Receiver.
To enjoy your set to the full from the very beginning, read this manual carefully and keep it for future
reference. 
						

							3 Important safety precautions Warning
Please unplug the power cord from the AC outlet and contact our service personnel to repair under thefollowing conditions:xAny obvious abnormality appears in the product, such as smoky, peculiar smell or strange sound.
xWhen a liquid has been spilled or other objects have fallen into the product.
xNo picture or sound.
xCover or panel is broken.
xAlthough you have operated the product by following the operating instructions, it still cannot work
normally. Warning
Be careful about the power cord or the plug to avoid the fire or the electric shock.xAlways disconnect the power cord and antenna during the storm.
xDo not fix the power cord with the metal nail.
xUnplug the power cord from the AC outlet; also unplug the signal cables from the input ports when the
product is unused for long periods of time or during a lightning storm.
xWhen unplug the plug, always hold the wide slot, do not touch the metal part, and do not destroy, refit,
twist, pull or roast the power cord.
xPlease contact the personnel service immediately if you found that the core is showed in the air or is
been broken.
xPlease replace the AC outlet if the metal bolt cannot be inserted into the power socket completely or it
cannot be fastened even when it was pushed in, otherwise, any accidents of shocks and fir es would
happen.
xNever touch the antenna lie or power plug if it stars to thunder.
xDo not touch the power plug with wet hands.
xDo not use any non-rated power socket with numerous devices jointed on one power socket or cable
device. The wire of non-designated capacity may cause the fire due to the generation of heat.
Instructions
All instructions must be read and understood well before you operating this product. Heed all warnings and
follow all instructions.
Attachments
Please use the attachment recommended by the manufacturer. Use the inadequate attachments may result in
accidents.
Adjustment
Please adjust the product through the panel buttons or the remote control, do not remove the cover or attempt
to service the product by yourself. Do not disassemble back cover and do not make maintenance by yourself
to avoid the electric shock.  Caution: Over-press the panel may destroy the product.
Placement
xDo not place the product on an unstable cart, stand surface, tripod, bracket, or table. The product may
fall, causing serious accidents as well as the damage to the product.
xPlease place the product on a flat surface in a well-ventilated location. Keep it away from the burning-
light, direct sunlight, vibration, high-temperature and humidity. Store the product with a temperature
from –200
C ~500
C; Otherwise you may destroy the product.
xDo not place any vase, potted plant, cup, medicine and any container with water on this product. If the
liquid is spilt, it may cause the fire, electric shock or breakdown.
xDo not install it at the place on the strong magnetic field or current field. It may cause break down. This
equipment may be observed deterioration of the picture by electromagnetic radiation in electromagnetic
environment. 
						

							4 xFasten the wheel of the product or shelf with wheels when installing this product. If it moves or is
tipped over, it may be damaged.
xDo not place any fire source such as candlelight close to this product or place it on this product.
If it is tipped over or fallen down, it may cause damage or fire.  Caution: Do not place the LCD TV into closed space of TV for better ventilation; it can reduce the
product lifetime. Keep a space at list 10cm at above, left, and right of the TV.
Remote control
xDo not exp ose the remote control to shock, liquids, and do not place it in an area with high humidit y.
Please use the qualified batteries and do not mix batteries with different types.
xDo not mix old and new batteries, and do not place the batteries to burn or disassemble them. If the
remote control is unused for an extend period of time, remove batteries from the remote control.
Cords
Please place all the signal cords behind of rear panel.
Cleaning
xUnplug the power cord from the AC outlet b efor e cleaning the product. Do not use liquid cleaners or
aerosol cleaners and others; use the special LCD Panel cleaners. Keep the power off before LCD panel
dry completely.
xClean the dust on the power plug periodically. Caution:Do not use volatile cleaner or you may damage the LCD Panel/Covers.
Transportation
xDo not overexert or touch the panel when you convey the product. Do not transfer the LCD TV up or
down display direction.
xDo not transport it with the power cord or the connection cable connected. If you move this product
with the power cord or the connection cable connected, the damaged power cord, connection cable or
connection terminal may cause the fire, the electric shock or breakdown.
x2 persons or more shall transport the device, which is heavier than 18 kg. If you drop or tip over the
device, it may damage it.
Other objects
To ensure not to get an electric shock or short circuit, please do not spill liquid or other objects into the
ventilation holes of the product. Caution:Do not stand on the LCD TV, do not push LCD TV or its’ stand. Keep it away from children.
Heating
The temperature of the product’s body becomes a little higher after a long period use. This phenomenon
indicates about heat exchange in normal working mode, thus please do not let children or anyone who is
sensitive of temperature to touch.
Note:All the OSD and illustrations in this manual may be somewhat different from the actual situation.
Please take the LCD Color TV menu as the standard. 
						

							5 General introductionxSize of the screen: 22/56 cm
xAspect ratio: 16:10
xScreen resolution: 1680 x 1050
xBrightness: 300 cd/m2
xContrast: 700:1
xWide viewing angle 170º/160º
xResponse time: 5 ms
xProgressive scan
xColor systems: PAL, SECAM
xDigital comb filter
xNICAM/A2 Stereo
xTeletext
xConvenient OSD menu in Russian and English languages
xConnections: RF antenna, composite, S-Video, SCART, VGA (d-Sub), HDMI, PC audio input
xPC monitor compatible
xWide range power supply: 100-240 V, 50/60 Hz
AccessoriesNote:Please keep the wrapping box and the padding well for future convenient use when you convey them.
Please check the accessories. If anything is missed address to the seller.
LCD TV  Instruction manual    Power cord     Remote control (RC)   Mains adaptor 
						

							6 Controls and connection   Front panel     Right panel
Top panel button description
ButtonDescriptionMENUOpen the menu or switch among the menus.CH+/-In T V mode, decrease/increase channel number. Select functions in menu operation.VOL+/-Decrease/increase the sound volume. Adjust functions in menu operation.TV/AVTo switch among the signal source.POWEREnter or leave the standby mode. 
						

							7 Rear panel
Rear panel terminals and controls
I temsConnection description1  AC inputConnect the AC power cable with 100-240V AC power supply. Connect the
other end of the AC power cable with the AC power port on the TV.2 HDMIConnect one end of the HDMI cable with HDMI output port, connect the other
end of the HDMI cable with the HDMI port on the TV, and tighten the bolts
clockwise on the each end of HDMI cable.3 VGAConnect one end of the VGA cable with the VGA port on computer, connect the
other end of the VGA cable with the VGA port on the TV, and tighten the bolts
clockwise on the each end of VGA cable.4 SCARTConnect them to the corresponding terminal of DVD.5 S-VideoThe output S-Video terminal of DVD can be connected with the S-Video input
port of the TV through S-Video cable.6Composite video
inputCapable of receiving PAL, NTSC, SECAM color systems; Very convenient to
watch VCR (video cassette recorder), Pickup Camera, other Disc’s programs.
The AV input of the TV can be connected with the output port of other AV
equipment through AV cable.7  L/R inConnect them to audio output terminal of DVD (with VIDEO/S-VIDEO).8  PC audio inConnect it to the audio output terminal of PC.9  Headphone outConnect it to your headphones or other audio equipment.10RF antennaThe RF output terminal can be connected with the RF input port of the TV.Notes:
xEnsure that the power to the LCD TV and other connected devices is off before you make any
connections.
xWhen connect, plug directly and slightly to the interface, otherwise you will damage the stitch.
xS-VIDEO and AV cannot be used at same time for they share of one signal channel.
xCheck and make sure that all AV cables are connected with the corresponding ports correctly. 
						

							8 Remote control (RC)
1.  TV/AV button. Press to select the input source.
2.  Number buttons. Press to input figures.
3.  SYSTEM button. Press to adjust color and audio parameters.
4.  CALL button. Press to display channel information.
5.  MENU button. Press to display or hide the OSD menu.
6.  VOL+/VOL- buttons. Press to adjust the sound volume level.
7.  TELETEXT buttons:
TXT/TV: switch the Teletext display on/off
MIX: display Teletext on top of the TV picture
SUBP/NICAM: subpicture mode / mono or stereo (in TV
mode)
HOLD: hold/carry on the current Teletext page
REVEAL: revel any hidden text
INDEX: go to index
SIZE: cha nge Teletext page size
CANCEL: Teletext display off
COLOR BUTTONS (RED, GREEN, YELLOW, CYAN)
follow colored links in the text.
8.  POWER button. Press to turn on/off the TV set or to switch it
to standby mode.
9.  MUTE button. Press to turn off/on the sound.
10.  SLEEP button. Press to set auto off time.
11.  RECALL button. Press to switch to the last watched channel.
12.  S-MODE button. Press to select sound mode.
13.  P-MODE button. Press to select picture mode.
14.  CH+/CH- buttons. Press to switch between channels.
Insert the batteries in the RC
xRemove the battery cover by pressing the symbol and pulling the cover space in the direction of the
arrow.
xInsert the two 1.5V (AAA size) batteries making sure the polarity (+ or -) of the batteries matches the
polarity marks inside the unit.
xReplace the battery cover by sliding it in until you hear a click sound.
Note:If the RC doesn’t react to pressing the buttons or the working range was decreased insert the new
batteries.
Use of RC
Use the RC by pointing it towards the RC sensor of the set. Objects between the RC and sensor may prevent
proper operation.
Note: The illustration is for your reference only; the remote sensor ma y locate different ly with different
model.
Cautions regarding use of RC
xDo not expose the RC to liquids, and do not place in an area with high humidity.
xDo not install or place the RC under direct sunlight. The heat may cause deformation of the unit.
xThe RC may not work properly if the remote sensor of the main unit is under dir ect sunlight or strong
lighting. In such a case, change the angle of the lighting or LCD TV set, or operate the RC closer to the
remote sensor. 
						

							9 OSD operationsFor all the buttons mentioned below, you can use those on the front panel or on the RC.To see the OSD, press MENU button. The first press will show either:
xthe VIDEO menu, if the set is switched to TV, SCART, AV, HDMI or S-VIDEO.
xthe PC menu, if the set is switched to PC-RGB.Press MENU button again, to see the other menus:
xa second press to see the AUDIO menu
xa third press to see the TV menu (only when switched to TV)
xa fourth press to see the GENERAL menu
xa fifth press to turn the menus off.To select a menu item, press CH+/CH- buttons to scroll up and down the list. When a menu item ishighlighted, use VOL+/VOL- buttons to change the setting. When you have changed the setting, you can exitfrom the menu:
xby waiting ten seconds without pressing any buttons;
xby pressing MENU button a few times until the menus turn off.
VIDEO Menu (in TV, SCART, AV or S-VIDEO mode)In this menu you can adjust following parameters:Brightness: to adjust the brightness of the picture.Contrast:to adjust the contrast of the picture.Colour:to adjust the colour of the picture.Hue:to adjust the hue of the picture (only in NTSC mode).Sharpness:to adjust the sharpness of the picture.
VIDEO Menu (in HDMI mode)Brightness: to adjust the brightness of the picture.Contrast:to adjust the contrast of the picture.Colour:to adjust the colour of the picture.
Auto config:press VOL+button to have the settings configured
automatically.
H/V-position:to adjust the position of the picture on the screen.
PC menuIn this menu you can adjust following parameters:Brightness: to adjust the brightness of the picture.Contrast:to adjust the contrast of the picture.Colour setting:to select from 6500K, 9300K or USER. If you selectUSER, you can use VOL+/VOL- buttons to adjust the Red, Green andBlue values individually. Press MENU when you finish adjusting.Auto configuration:press VOL+button to have the followingsettings configured automatically:Horizontal/Vertical position:to adjust the position of the picture onthe screen.Phase:to adjust the phase of the ADC sampling clock relative to theHSync signal, until a stable image is obtained.Clock:to adjust the pixel clock frequency, until the image size is maximized for the screen. 
						

							10 AUDIO menuIn this menu you can adjust following parameters:Volume:to adjust the volume of the sound.Balance:to adjust the left/right balance of the sound.Audio Preset:to select from Personal, Voice, Music or Theatre. Ifyou select Personal, you can adjust the following settings:Treble and Bass:to adjust the tone of the sound.
TV menuIn this menu you can adjust following parameters:Channel:to select a channel.S ys tem:to select a display system: BG, DK, I, L.Skip:to turn the channel skip: ON – this channel will be skippedwhen changing channel using the CH+/- buttons; OFF – this channelwill be included when changing channel using the CH+/- buttons.Automatic Frequency Control:to turn AFC ON or OFF:Fine Tune:to fine tune the frequency if you are having problems witha weak signal on the current channel. The AFC will turn off if you usethe Fine Tune controls.SWAP:Press VOL+ button to enter theSWAP menu.For example, to swap channel 5 with channel 1:Using VOL+/VOL- buttons to set theFROMnumber to 5. Press CH+ button to move the highlight down totheTOnumber. Using VOL+/VOL- buttons to set theTOnumber to 1. Press CH+ button to move thehighlight down to SWAP. Press CH+ button to make the swap.Manual Search:Press VOL+button once, then again to select from DOWN or UP. Press MENU button tostart the Manual Station Search. When the search is finished, the first station found will be allocated to thecurrent channel.Autosearch: Press VOL+ button to start autosearch. The TV will start searching from the lowest frequency.When it finds a station, it will automatically store this in the first location and move to the next. Whenautosearch is complete, the TV will display the first station found. In most cases, the stored stations will notbe in the correct order, therefore you must use the SWAP function to change to the correct order.
GENERAL menuIn this menu you can adjust following parameters:Language:to select the needed OSD language.Blue Screen:to turn the blue screen: ON - the screen will turn bluewhen the signal strength is very poorOFF - the picture and sound will be noisy when the signal is verypoor.Noise Reduce:to select: OFF, LOW, MID, HIGH.Input Source:to select which input source to use: TV, SCART, PC-RGB, AV, HDMI or S-VIDEO.TXT Language:to select the T eletext la nguage.TXT EAST/WEST:to select the a rea of Teletext.ZOOM:to select the display mode of the screen.Reset:press VOL+button to return the set to the factory default settings.