Hyundai H Lcd2008 Instruction Manual

							11 Picture mode setup
Press P button repeatedly, then picture will change as follows: USER =>DYNAMIC => STAN-
DARD => MILD.
Sound mode setup
Press S button repeatedly, the sound mode will be changed as follows: USER => MUSIC =>
SPEECH => MOVIE.
MENU
Press this button to enter/quit menu.
SLEEP
Press SLEEP button, to choose auto turn-off time from 5 to 120 minutes or choose 
						

							12 OSD operationsNote: In this manual the OSD (On Screen Display) may be different from your TV’s because it is
just an example to help you with the TV operation.
In the following contents, press MENU button to enter the menu; press P+/P- buttons to select an
item. The highlight background means the current selection, press V+/V- buttons to set the selected
item or enter into sub-menu (or use cursor buttons), after setting is done, press OK button or MENU
button to go back to the previous menu. Press MENU button to quit the setting menu.
Picture
xBrightness. To adjust picture brightness.
xContrast. To adjust picture contrast.
xColour. To adjust colour.
xSharpness. To adjust picture sharpness.
xPicture preset: USER => DYNAMIC => STAN-
DARD => MILD
xPicture enhance
oSkin tone: Choose on or off
oBlue stretch: Choose on or off
oBlack stretch: Choose on or off
Note: JK ADJUST can be adjusted only in PC mode
Sound
xVOLUME. Change the value of volume with the
key V+/V- the rang of 0 to 1 00.
xAVL. Set the function of AVL on or off. AVL to
on will limit the abruptly sound increasing usually
caused by advertising time.
xBALANCE: Change the value of balance from-50
to 50, usually 0 is default.
xLOUDNESS: Set the function of Loudness on or
off. Setting Loudness on can make bass a little bit
enhanced when the volume is small.
xSURROUND: Turn on surround effect.
xSOUND PRESET: Set the sound mode to USER => MUSIC => SPEECH => MOVIE =>.
xGRAPHIC EQUALIZER: enter equalizer submenu. 
						

							13 Feature
xLANGUAGE
Select the language of the OSD as follows: ENGLISH - RUSSIAN.
xBLUE BACK
Set the function of blue background on or off.
xTIMER
oCLOCK. Setup current time. Press V- buttons to ad-
just hours. Press [V+] to adjust minutes.
oOFF TIME. Setup auto off time. While V- buttons
to adjust hours. Press V+ to adjust minutes.
oON TIME. Setup auto on time. While showing - -:--
auto on function does not work. Press V- buttons to
adjust hours. Press V+ to adjust minutes. showing -
-:--, auto off function does not work. Press
oON PROGRAM. Setup auto on program. When
turn on TV, it comes to the setup program. The se-
lecting range is 0~199.
xLOCK
Enter the password accurately.
The original password is 0000.
oCHILD LOCK. In order to avoid children to watch
the Program which is not suitable, a children lock
co uld
  be set. If it is ON and the program is chosen. The
locked information will be noted on the screen.
oPROGRAM. The program number which you want
to be locked, you can change the program number
by direct press digit button or V+/V-.
oLOCK. When chosen the program number then LOCK in MENU is on, t he setup of LOCK is
funct io nal, o t herwise, t he fo llo wing set up is funct io nless.
oVOLUME LIMIT. When it is OFF, VOLUME MAX is functionless; when it is ON, it controls
  the sound volume together with VOLUME MAX.
oVOLUME MAX. Setup the upper limit of the volume adjustment. While VOLUME LIMIT is
ON, the VOLUME LIMIT will be the max of sound. While VOLUME LIMIT is OFF, the
so und adjust ment  is no t  limit ed. 
						

							14 oCHANGE PASSWORD. Press digit number to enter new Password in NEW PASSWORD
item, and enter again in CONFIRM item. The same entering for twice will change the pass-
word, different entering will back to the NEW PASSWORD item.
xCalendar
Choose year number, the range of the years is from 1900
to 2155;
Choose month number; the range of the month is from 1
to 12.
Tuning
xPROGRAM. Switch present program number.
xSKIP. When it is OFF, skip is not available; if it is
ON, the present program could be skipped, but it
could be achieved through digit buttons
xCOLOUR SYSTEM. Select the colour system from
AUTO => PAL   => NTSC => SECAM => NTSC-
443 =>.
xSOUND SYSTEM: Select sound system from DK
=> I => BG.
xAUTO SEARCH. Start auto search of the channels. The AFT will be open.
xSEARCH. Start manual search. The AFT will be open.
xFINE TUNE. Start fine tune.
xAFT. Select the function of Auto frequency control.
Note: Submenu TUNING only appears under TV mode.
xEXCHANGE
oPROGRAM: The present PROGRAM number.
oEXCHANGE TO: The exchange program.
oEXCHANGE: Press V+/V- buttons in EXCHANGE
to confirm exchange, or quit by pressing MENU but-
ton. 
						

							15 Menu operation in VGA/YpbPr mode
1. Display NO SYNC PLEASE CHECK CABLE in the middle screen without signal input.
The green light glitters after 30 seconds.
Menu and number buttons are unavailable. Switch to other source by TV/AV button. System goes
to
standby after 30 seconds of no signal waiting.
2. Display UNSUPPORT MODE PLEASE ADJUST RESOLUTION in the middle of the screen
overstep display range.
3. Only PICTURE SOUND and FEATURE menu can work when there is signal input. The
SOUND and FEATURE menu are the same as before, but only BRIGHTNESS, CONTRAST
and PC ADJUST can be adjust in the picture menu. The right picture is the sketch map of the PC
ADJUST submenu. The definition of each option:
xH POS: Adjust the Horizon position.
xV POS: Adjust the Vertical position.
xH SIZE: Adjust the Horizon size.
xPHASE: Adjust the Sampling phase.
xCOLOUR TEMP: Setting for color temperature
as below: NORMAL => 6500 => 9300 =>
NORM
xAUTO ADJUST: Adjust  aut o mat ically.
xRESET: Resets H POS, V POS, H SIZE,
PHASE. 
						

							16 TroubleshootingBefore calling a technician, please check the following items to see whether you can easily diagnose
and fix the encountered symptoms on your own.
SymptomsPossible CauseCorrectionNo picture, no
sound, and no indi-
cat o r lightThe power cord is not plugged in.
Contrast, sharpness, color and volume
are all in t he minimum value o r TV is
in mute mode.Plug the power cord in.
Alter the value of contrast, sharp-
ness, color and volume.Picture and sound
wit h abno rmit yContrast and color are set improperly.
Co lo r syst em is set  impro perly.
So und syst em is set  impro perly.Set the value of Contrast, sharp-
ness, and color properly.
Adjust Color system.
Set the sound system properly.Picture is spotted or
with snowSignal source is low-grade or the signal
is in a lo wer qualit y.Use the qualified signal cord.Blue backgroundNo Video signal or the signal cord is
improperly/not connected.Connect the signal cord properly.PC Picture is not in
the middle of the
screenPicture is not well adjusted.Adjust  H/V- po sit io n manually.No soundNo  Audio  signal o r t he signal co rd is
improperly/not connected.Connect the audio signal cord
properly.
Set the sound system properly.The RC does not
workBat t eries are impro perly inst alled o r
exhausted.Make sure the positive and the
negative polarities are correct.
Reattach the battery lid.
Replace the batteries. 
						

							17 The causes of interferenceIncorporated in your TV receiver are the most up-to-date devices to eliminate interference. Local
radiation however, can create disturbances, which visibly affect your picture. Proper installations, a
good aerial are your best safeguards against these disturbances.
xRF INTERFERENCE
Moving ripples across the screen are caused by nearby transmitting or receiving short-wave ra-
dio equipment.
xDIATHERMY
Herringbone pattern and partial picture loss can result fro m the operation of diathermy equip-
ment from a nearby doctors surgery or hospital.
xSNOW
Weak TV signals from long distant stations result in an instead picture and give the effect of
falling snow. An antenna adjustment or antenna amplifier may be needed.
xGHOST
Multiple image, caused by TV signals reflected back from surrounding buildings, hills, aircraft,
etc. is minimized by correct aerial positioning.
xCAR IGNITION
Nearby cars and electrical motors can cause small streaks across the picture or make the picture
ro ll. 
						

							18 SpecificationsItemsH-LCD3200Size (diagonal)20” (51 cm)Brightness450 (cd/m2
)Contrast500:1Angle of view160°/140°High speed response16 msLCD panel it ems
Resolution800 x 600Color systemPAL, NTSC, SECAMSound systemDK, I, BGDigit al co mb filt erYesRussian and English OSDYesConnections:
PC VGA input
Audio input
S-Video
Composite
SCART
Co mponentYes
Yes
Yes
Yes
Yes
YesTimer on/offYesSleepYesQuantity of channels199Voltage input~100-240 V; 50/60 HzNote:The LCD panel is a high technology product with many thin film transistors that
can give you a fine picture details. Occasionally, a few non-active pixels may appear on
the screen as a fixed point of blue, green, red, black or white, please note that this does
not affect the performance of your LCD TV.
Warning:Specificat io ns may be subject  t o  change wit ho ut  no t ice fo r impro vement . 
						

							19 Kh^_j`Zgb_Kh^_j`Zgb_..............................................................................................................................................................19
F_ju[_ahiZkghklb..................................................................................................................................................20
H[sZybgnhjfZpby..................................................................................................................................................23
Dhfie_dlihklZ\db...................................................................................................................................................23
We_f_glumijZ\e_gbybih^dexq_gb_....................................................................................................................24
Imevl^bklZgpbhggh]hmijZ\e_gby (I>M)..............................................................................................................26
J_`bfujZ[hluL
						

							20 F_ju[_ahiZkghklbIh`ZemcklZ, ba\e_dbl_ rgmj iblZgby ba jha_ldb b k\y`bl_kv k k_j\bkghc kem`[hc \ke_^mxsbokemqZyo:x?keb \ba^_ebb bf_xlky y\gu_ g_bkijZ\ghklb, gZijbf_j, bag_]hb^_l ^uf, qm\kl\m_lky
ki_pbnbq_kdbcaZiZobebkeur_gg_ihgylguca\md.
x?keb\gmljvba^_ebyihiZeZex[Zy`b^dhklvbebihklhjhggb_ij_^f_lu.
x?kebg_lbah[jZ`_gbybeba\mdZ.
x?kebih\j_`^_gdhjimkbebiZg_ev.
x?keb