Hyundai H Lcd2008 Instruction Manual

							H-LCD2008
LCD TV           LCD L?E?
						

							2 Table of contentsTable of contents......................................................................................................................................................... 2
Important safety precautions........................................................................................................................................ 3
General introduction.................................................................................................................................................... 5
Accessories ................................................................................................................................................................. 5
Controls and connection .............................................................................................................................................. 6
Remote control (RC) ................................................................................................................................................... 8
Operations .................................................................................................................................................................10
OSD operations..........................................................................................................................................................12
Troubleshooting .........................................................................................................................................................16
The causes of interference ..........................................................................................................................................17
Specifications.............................................................................................................................................................18
Thank you very much for buying our product – the most natural Colour Television Receiver.
To enjoy your set to the full from the very beginning, read this manual carefully and keep it for fu-
ture reference. 
						

							3 Important safety precautionsWarning
Please unplug the power cord from the AC outlet and contact our service personnel to repair underthe following conditions:xAny obvious abnormality appears in the product, such as smoky, peculiar smell or strange
sound.
xWhen a liquid has been spilled or other objects have fallen into the product.
xNo picture or sound.
xCover or panel is broken.
xAlthough you have operated the product by following the operating instructions, it still cannot
wo rk no rmally. Warning
Be careful about the power cord or the plug to avoid the fire or the electric shock.xAlways disconnect the power cord and antenna during the storm.
xDo not fix the power cord with the metal nail.
xUnplug the power cord from the AC outlet; also unplug the signal cables from the input ports
when the product is unused for long periods of time or during a lightning storm.
xWhen unplug the plug, always hold the wide slot, do not touch the metal part, and do not de-
stroy, refit, twist, pull or roast the power cord.
xPlease contact the personnel service immediately if you found that the core is showed in the air
or is been broken.
xPlease replace the AC outlet if the metal bolt cannot be inserted into the power socket com-
pletely or it cannot be fastened even when it was pushed in, otherwise, any accidents of shocks
and fires would happen.
xNever touch the antenna lie or power plug if it stars to thunder.
xDo not touch the power plug with wet hands.
xDo not use any non-rated power socket with numerous devices jointed on one power socket or
cable device. The wire of non-designated capacity may cause the fire due to the generation of
heat.
Instructions
All instructions must be read and understood well before you operating this product. Heed all warn-
ings and fo llo w all inst ruct io ns.
Attachments
Please use the attachment recommended by the manufacturer. Use the inadequate attachments may
result in accidents.
Adjustment
Please adjust the product through the panel buttons or the remote control, do not remove the cover
or attempt to service the product by yourself. Do not disassemble back cover and do not make main-
tenance by yourself to avoid the electric shock.  Caution: Over-press the panel may destroy the product.
Placement
xDo not place the product on an unstable cart, stand surface, tripod, bracket, or table. The prod-
uct may fall, causing serious accidents as well as the damage to the product. 
						

							4 xPlease place the product on a flat surface in a well-ventilated location. Keep it away fro m the
burning-light, direct sunlight, vibration, high-temperature and humidity. Store the product with
a temperature from –200
C ~500
C; Otherwise you may destroy the product.
xDo not place any vase, potted plant, cup, medicine and any container with water on this prod-
uct. If the liquid is spilt, it may cause the fire, electric shock or breakdown.
xDo not install it at the place on the strong magnetic field or current field. It may cause break
down. This equipment may be observed deterioration of the picture by electromagnetic radia-
tion in electromagnetic environment.
xFasten the wheel of the product or shelf with wheels when installing this product. If it moves or
is tipped over, it may be damaged.
xDo not place any fire source such as candlelight close to this product or place it on this product.
If it is tipped over or fallen down, it may cause damage or fire.  Caution: Do not place the LCD TV into closed space of TV for better ventilation; it can
reduce the product lifetime. Keep a space at list 10cm at above, left, and right of the TV.
Remote control
xDo not expose the remote control to shock, liquids, and do not place it in an area with high hu-
midity. Please use the qualified batteries and do not mix batteries with different types.
xDo not mix old and new batteries, and do not place the batteries to burn or disassemble them. If
the remote control is unused for an extend period of time, remove batteries from the remote
co nt ro l.
Cords
Please place all the signal cords behind of rear panel.
Cleaning
xUnplug the power cord from the AC outlet before cleaning the product. Do not use liquid
cleaners or aerosol cleaners and others; use the special LCD Panel cleaners. Keep the power off
before LCD panel dry completely.
xClean the dust on the power plug periodically. Caution:Do not use volatile cleaner or you may damage the LCD Panel/Covers.
Transportation
xDo not overexert or touch the panel when you convey the product. Do not transfer the LCD TV
up or down display direction.
xDo not transport it with the power cord or the connection cable connected. If you move this
product with the power cord or the connection cable connected, the damaged power cord, con-
nection cable or connection terminal may cause the fire, the electric shock or breakdown.
x2 persons or more shall transport the device, which is heavier than 18 kg. If you drop or tip
over the device, it may damage it.
Other objects
To ensure not to get an electric shock or short circuit, please do not spill liquid or other objects into
the ventilation holes of the product. Caution:Do not stand on the LCD TV, do not push LCD TV or its’ stand. Keep it away from
children.
Heating
The temperature of the product’s body becomes a little higher after a long period use. This
phenomenon indicates about heat exchange in normal working mode, thus please do not let children
or anyone who is sensitive of temperature to touch.
Note:All the OSD and illustrations in this manual may be somewhat different from the actual situa-
tion. Please take the LCD Color TV menu as the standard. 
						

							5 General introductionxSize of the screen 20/51 cm
xAspect ratio 4:3
xScreen resolution: 800x600
xBrightness: 450 cd/m2
xContrast: 500:1
xWide viewing angle 160º/140º
xResponse time: 16 ms
xColor systems: PAL, SECAM, NTSC
xDigit al co mb filt er
xCo nvenient OSD menu in Russian and English languages
xConnections: RF antenna, S-Video, Composite, SCART, Component, headphones out, VGA
xWide range power supply: 110 – 240 V, 50/60Hz
AccessoriesNote:Please keep the wrapping box and the padding well for future convenient use when you con-
vey them.
Please check the accessories. If anything is missed address to the seller.
      LCD TV     DC adapterAC Power cord      Remote control (RC)
           Instruction manual      Consumer information      Warranty card 
						

							6 Controls and connectionPlace your LCD TV on a flat surface in a well-ventilated location.
Front panel
Top panel button descriptionButton Description1MENU  Open the menu or switch among the menus.2TV/AV  To switch among the signal source.3VOL-/+  Decrease/increase the sound volume. Adjust functions in menu operation.4P-/+In TV mode, decrease/increase channel number. Select functions in menu operation.5IndicatorIndicates the TV state6POWER  Enter or leave the standby mode.7Sensor  Remote sensor for RC 
						

							7 Rear panel terminals and controls
ItemsConnection description8  DC inputConnect the DC 12V power cable with DC adapter, which should be
connected to AC power supply. Connect the other end of the DC
power cable with the DC power port on the TV.9  Headphone jackCo nnect the headphones t o this jack10RF antennaThe RF output terminal can be connected with the RF input port of
the TV.11S-VideoThe output S-Video terminal of DVD can be connected with the S-
Video input port of the TV through S-Video cable.12Composite video input
Audio inputThe product can receive different signals (the programs send by TV
station) and transfer these signals through AV signal cable to other
audio and video equipments. The AV output of the TV can be con-
nected with the input port of other AV equipment through AV cable.13SCARTConnect DVD video player or other device via SCART cable14Component video inputIt’s convenient to receive the co mponent video  signal of high defini-
tion from DVD player. The output Component (YPbPr) terminal of
DVD can be connected with the Component (YPbPr) input port of the
TV through AV cable.15VGA (PC) inputConnect VGA cable to the PCNotes:
xEnsure that the power to the LCD TV and other connected devices is off before you make any
connections.
xCheck and make sure that all AV cables are connected with the corresponding ports correctly. 
						

							8 Remote control (RC)1. POWER button
2. Digit buttons
3. Switch program button
4. SCAN button
5. V-/+ button
6. OK button
7. MENU button
8. P button
9. S button
10. TV/AV button
11. PREVIOUS CHANNEL button
12. P-/+ button
13. SURROUND button
14. Cursor buttons
15. MUTE button
16. CALL button
17. SLEEP button 
						

							9 Insert the batteries
xRemove the battery cover by pressing the symbol and pulling the cover space in the direction of
the arrow.
xInsert the two 1.5V (AAA size) batteries making sure the polarity (+ or -) of the batteries
matches the polarity marks inside the unit.
xReplace the battery cover by sliding it in until you hear a click sound.
Note:If the RC doesn’t react to pressing the buttons or the working range was decreased insert the
new batteries.
Use of RC
Use the RC by pointing it towards the RC sensor of the set. Objects between the RC and sensor may
prevent proper operation.
Note: The illustration is for your reference only; the remote sensor may locate differently with dif-
ferent model.
Cautions regarding use of RC
xDo not expose the RC to liquids, and do not place in an area with high humidity.
xDo not install or place the RC under direct sunlight. The heat may cause deformation of the
unit.
xThe RC may not work properly if the remote sensor of the main unit  is under direct sunlight or
st rong light ing. In such a case, change the angle of the light ing or LCD TV set, or operate the
RC closer to the remote sensor.
TV installation
Connect antenna or video facility
Use 75 Ohm coaxial cable plug or 300-75 Ohm impedance converter to plug in antenna input ter-
minal on the rear of the cabinet. 
						

							10 OperationsStandby
Press POWER button to turn on or off.
TV/AV
Press TV/AV button, signal source changes as following: TV => AV => SVHS => SCART =>
YpbPr => PC => TV. By long pressing this button you will select menu as followed you can select
which source you need quickly.
Digit buttons
Direct ly press the number buttons to switch to the relevant program, according to the current pro-
gram digits. The selecting range of the programs is 0~199.
Switch program button
xEach time after selecting a program, it will automatically turn back to one digit mode, and
press [-/--] to choose two or three digits before pressing number keys [0]~[9]: the program dig-
it s will changed as fo llo ws: -- >,1-- >.
xIn the state of two digits entering, the program will come back to the present one, only when
the second number is not entered within 3 seconds after the first numbers entering. While in
three digits entering, the first digit will automatically be 1, and the program will come back to
the present one, only when the third number is not entered within 3 seconds after the second
numbers entering.
Previous channel
Jump back to the previous program.
Mute
Pressing this button, the audio can be muted, press again, the audio will be on.
Call
Show present mode.
No.1. The number is the program number.
No.2. It is the state of the c hild lock .
No.3. The 03:03 is the current time.
No.4. The OFF TIME is the auto off time.
No.5. The SLEEP is the time that how
long the TV will auto off.
OK
Picture mode Setup [OK]:
Press this button in TV mode, to enter picture menu: BRIGHTNESS => CONTRAST => COLOUR
=> SHARPNESS. You can change the value with LEFT/RIGHT cursor buttons or V-/+ button.