Hyundai H Lcd1918 Instruction Manual

							ТЕЛЕВИЗОР ЦВЕТНОГО ИЗОБРАЖЕНИЯ 
ЖИДКОКРИСТАЛЛИЧЕСКИЙ  (LCD)
LCD TV
Руководство по эксплуатации 
Instruction manual
H-LCD1918
 
						

							Table of contents 
Before you start 
Utilization of the product 
Important safeguards
Installation
Stand installation
Connection
ConnectionOutdoor antenna connection
Other connections
Operation
Control elements  Front panel
 Back panel
Remote controller Changing the battery
General operations  Teletext operations
OSD operation Picture setting (in TV mode)
PC setup (in VGA mode)
Sound setting
Channel setting
Timer setting
Function setting
General information
Troubleshooting Causes of interference
Accessories
Specifications
2 3
Table of contentsBefore you start
Dear customer!Thank you for purchasing our product. For safety, it is strongly recommended to read 
this manual carefully before connecting, operating and/or adjusting the product and keep 
the manual for reference in the future.
2
3
3
3
5
5
6
6
6
6
7
7
7
7
8
8
9
9
9
9
10
10
10
11
11
12
12
12
13
13
Downloaded From TV-Manual.com Manual” 
						

							23
Table of contentsBefore you start
If you want to dispose this product, do not mix it with general household waste. There is 
a separate collection system for used electronic products in accordance with legislation 
that requires proper treatment, recovery and recycling. Please contact your local authorities for the correct method of disposal. By doing so, 
you will ensure that your disposed product undergoes the necessar y treatment, recovery 
and recycling and thus prevent potential negative effects on the environment and human 
health.
Utilization of the product
Important safeguards
•  Please unplug the power cord from the AC 
outlet and contact a service center for repair 
if following occurs: any obvious abnormality 
appears in the unit, such as smoky, peculiar 
smell or strange sound; liquid has been spilled or 
other objects have fallen into the unit; no picture 
or sound; cover or panel is broken; although you 
have operated the unit following the operating 
instructions, it still cannot work normally.
•  This unit should only be connected to a 
wall socket having grounding.
•  Always disconnect the power cord and 
antenna during a storm. •  Do not fix the power cord with a metal nail.
•  Unplug the power cord from the AC outlet; 
also unplug the signal cables from the input 
ports when the unit is unused for long periods 
of time. •  When unplugging the plug, always hold 
the wide slot, do not touch the metal part, and 
do not destroy, refit, twist, pull or roast the 
power cord. •  Please contact the service center 
immediately if you found that the core is 
showed in the air or has been broken. •  Please replace the AC outlet if the metal 
bolt cannot be inserted into the power socket 
completely or it cannot be fastened even when 
it was pushed in, otherwise, any accidents of 
shocks and fires would happen. •  Never touch the antenna lie or power plug 
if it stars to thunder. •  Do not touch the power plug with wet 
hands. •  Do not use any non-rated power socket 
with numerous devices jointed on one power 
socket or cable device. The wire of non-
designated capacity may cause the fire due to 
the generation of heat. •  All instructions must be read and 
understood well before you operate the unit. 
Heed all warnings and follow all instructions. •  Please use the accessories provided 
by the manufacturer. Using inadequate 
accessories may result in accidents. •  Please adjust the product through the 
panel buttons or the remote controller, do 
not remove the cover or attempt to service 
the product by yourself. Do not disassemble 
back cover and do not make maintenance by 
yourself to avoid the electric shock. •  Over-press the panel may destroy the 
product. •  Do not place the product on an unstable 
cart, stand surface, tripod, bracket, or table. 
The product may fall, causing serious accidents 
as well as the damage to the product.  •  Please place the product on a flat surface 
in a well-ventilated location. Keep it away from 
the burning-light, direct sunlight, vibration, 
high-temperature and humidity. Store the 
product with a temperature from –20
0C ~500C; 
otherwise you may destroy the product. 
Downloaded From TV-Manual.com Manual” 
						

							4
Before you start
• Do not place any vase, potted plant, cup, 
medicine and any container with water on this 
product. If the liquid is spilt, it may cause the 
fire, electric shock or breakdown. •  Do not install it at the place on the strong 
magnetic field or current field. It may cause 
break down. This equipment may be observed 
deterioration of the picture by electromagnetic 
radiation in electromagnetic environment.
•  Fasten the wheel of the product or shelf 
with wheels when installing this product. If it 
moves or is tipped over, it may be damaged. •  Do not place any fire source such as 
candlelight close to this product or place it on 
this product. If it is tipped over or fallen down, it 
may cause damage or fire. •  Do not place the unit into closed space 
of TV for better ventilation; it can reduce the 
product lifetime. Keep a space at list 10 cm at 
above, left, and right of the TV. •  Please place all the signal cords behind of 
rear panel. •  Do not overexert or touch the panel when 
you convey the product. Do not transfer the 
LCD TV up or down display direction. •  Do not transport it with the power cord 
or the connection cable connected. If you 
move this product with the power cord or the 
connection cable connected, the damaged 
power cord, connection cable or connection 
terminal may cause the fire, the electric shock 
or breakdown. •  2 persons or more shall transport the 
device, which is heavier than 18 kg. If you drop 
or tip over the device, it may damage it. •  The temperature of the product’s body 
becomes a little higher after a long period use. 
This phenomenon indicates that heat exchange 
in normal working mode, thus please do not 
let children or anyone who is sensitive of 
temperature to touch.
All images provided herein are schematic 
drawings of real objects and may differ 
from their real images.
 
						

							5
Installation
Stand installation
1. Cover an even stable surface with a soft 
cloth. Place the LCD TV unit facedown on the 
cloth. Prepare to put the stand in.
2. Fit the stand into the LCD TV unit stand 
socket until a click.
Downloaded From TV-Manual.com Manual” 
						

							6
Operation
Outdoor Antenna ConnectionUse 75Ω coaxial cable plug or 300-75Ω 
impedance converter to plug in antenna input 
terminal on the rear of the cabinet.
Other connections•  Connect the audio sources to the proper 
stereo audio input jacks ‘L’ and ‘R’. •  Connect the video source to the video 
input jack by RCA cable. •  When using the TV as a computer screen, 
connect the PC to the VGA jack from the 
monitor by the relevant cable. •  This unit has PC audio in jack. Connect 
this jack to PC main unit with related audio 
cable in PC mode and adjust the volume to 
what you want. •  If the video source has a HDMI output 
jack, you can connect the signal to this unit by 
the HDMI cable.
Connection
•  Connect an external device (e.g., VCR-/
DVD-recorder) to the proper Audio/Video 
output jacks of this unit with AV RCA cable. •  Component input Y/Pb/Pr is intended for 
receiving component video signal if connected 
to the component output of external signal 
source. •  Connect your headphones or earphones 
(not included) to the headphone socket of 
this unit. When earphones are connected, the 
sound output through the built-in speakers of 
this unit is mute.
75 Ohm co-axis cable
TVRF antenna jack
Antenna cable connector
Downloaded From TV-Manual.com Manual” 
						

							7
Operation
Control elements    
Front panel
Back panel
1. Power switch
2. HDMI input
3. Video input
4. Stereo audio input (Left+Right) 
for component video
5. Component video (YPbPr) input
6. Headphone jack
7. PC audio input
8. VGA (PC) input
9. Stereo audio input (Left+Right)
10. RF antenna input
11. Stereo audio output (R+L)
12. Video output 1. POWER button
2. TV/AV button
3. MENU button
4. VOL- button
5. VOL+ button
6. CH- button
7. CH+ button
8. IR sensor
9. Power indicator
1
2
3
4
5
6
7
8
9
10
11
12
1
2
3
4
5
6
7
8
9
Downloaded From TV-Manual.com Manual” 
						

							89
OperationOperation
Remote controller (RC)
1.  POWER button
2.  Number buttons
3.  SOURCE/REVEAL button
4.  SIZE/ZOOM button
5.  MENU button
6.  ENTER button/cursor buttons (
//
/)
7.  VOL+/VOL- buttons
8.  SLEEP button
9.  CANCEL button
10. Green button 11. Red button 
12. TEXT button
13. HOLD button
14. INFO/INDEX button
15. 
 button
16.  button
17. RECALL button
18. EXIT button
19. CH+/CH- buttons
20. Not functional for this model
21. Not functional for this model
22. Yellow button
23. Blue button
24. E/W button
25. SUBPAGE button
Changing the battery1.  Remove the battery compartment cover 
on the back of the RC. 2.  Insert the batteries into the battery 
compartment making sure that the correct 
polarity is observed. 3.  Install the cover back.
•  Use two AAA batteries for the RC. The RC 
should be pointed at remote sensor within 8 
meters and within 30 degrees at the left or the 
right side. •  Take the battery out of the RC if it is not 
used for a long time. •  Do not mix new and used batteries or 
different types of batteries. Weak batteries can 
leak and severely damage the RC. •  Do not expose the RC to shock, liquids, 
and do not place it in an area with high 
humidity.
1 23
1
2
3
4
5
6
7
9 8
11
  10
12
13 14
15
16
17
18
19
21 20
22
23
24
25
Downloaded From TV-Manual.com Manual” 
						

							89
OperationOperation
General operations
•  Press POWER button on the unit or on the 
RC to switch on the power. Press POWER button 
again to switch the unit into standby mode. •  Press VOL- button repeatedly to decrease 
the volume; press VOL+ button repeatedly to 
increase the volume.
•  Press 
 button to cut off sound, press this 
button again or adjust volume to resume sound. •  Press SLEEP button repeatedly to set the 
sleep time. When sleep time is set, press this 
button to display the time remaining until the 
auto turn off. •  Press 
 button in TV mode repeatedly to 
switch between Stereo, Mono, Dual I and Dual 
II sound modes (can be unavailable for some 
channels). •  Press SOURCE button on the RC or TV/
AV button on the unit, then press 
/ 
cursor buttons to cycle through the available 
source list as follows: TV - AV - YPbPr - HDMI 
- VGA. •  Select the TV function mode. Press 
CH-/CH+ buttons to select previous or next 
channels; or press number buttons to enter a 
channel number from 0 to 235 directly. •  Press RECALL button on the RC to select 
from the present channel and the previously 
displayed channel. •  Press INFO button to display the preset 
TV channel play information.
Teletext operations (option)Select a TV channel in order to pick up 
the picture signal of Teletext. Teletext button 
functions are as follows: TEXT: Press TEXT button to enter into 
TEXT mode. Press this button again to enter 
mixed mode. Press the button again to return 
to the channel you are watching. Press 
/ buttons or number buttons to select 
teletext pages. HOLD: Press this button to stop the move 
to the next page. Press this button again to 
cancel operation. INDEX: Press this button to go to the index 
page. SIZE: Press this button to enlarge the top 
part of the page. Press this button again to 
enlarge the bottom part of the page. Press this 
button third time to normal size text page view. REVEAL: Press this button to reveal the 
cancelled information. Press this button again 
to cancel the information. SUBPAGE: Press this button to select sub-
page. Input the number of sub-page and use 
numeric buttons in the format 0001 for sub 
page 1. The teletext will search for the sub 
page. Press SUBPAGE button again to exit the 
subpage mode. Red/Green/Yellow/Blue buttons: Press 
these 4 color buttons to access directly to 
corresponding color page displayed at the 
lower parts of teletext screen.
OSD operation
Press MENU button to enter the OSD 
menu. Use 
/ buttons to select a setting 
page. Press / buttons to go to the 
needed item, then use 
/ buttons to select 
available setting or to adjust the selected item. 
Press ENTER button to confirm After setting, press EXIT button to exit menu.
Picture setting (in TV mode)
PICTURE
PICTURE MODE
CONTRAST
BRIGHTNESS
SATURATION
TINT
SHARPNESS
COLOR TEMP.
ADVANCE
Downloaded From TV-Manual.com Manual” 
						

							10
Operation
•  Picture Mode: User/Standard/Soft/Vivid.
•  Contrast
•  Brightness
•  Saturation
•  Tint: adjust the tone of color when your 
system is in NTSC. •  Sharpness
•  Colour Temperature: Normal/Warm/Cool.
•  Advance:
DLC: dynamic luminance control.
BLE: black level extend.
DNR: dynamic noise reduction.
Picture setting (in PC mode)
PICTURE
PICTURE MODE
CONTRAST
BRIGHTNESS
CLOCK
PHASE
POSITION
COLOR TEMP.
AUTO ADJUST
•  Picture Mode: User/Standard/Soft/Vivid.
•  Contrast
•  Brightness
•  Clock: adjust the image frequency 
manually. •  Phase: adjust the phase manually.
•  Position:
H-Position: adjust horizontal position of the 
image. V-Position: adjust vertical position of the 
image. •  Colour Temperature: Normal/Warm/Cool.
•  Auto adjust: automatical setting of the 
parameters.
Sound setting
SOUND
SOUND MODE
BASS
TREBLE
BALANCE
AVC
•  Sound Mode: News/Theatre/Music/User.
•  Bass: adjust the low frequency level.
•  Treble: adjust the high frequency level.
•  Balance: adjust output between left and 
right speakers. •  AVC : set the auto volume leveller on/off.
Channel setting (in TV mode only)
CHANNEL
AUTO SEARCH
MANUAL SEARCH
•  Auto search: press  button to start 
automatic search of available channels. To 
stop the process press MENU or EXIT button.
•  Manual search: Press 
 button to enter 
into manual tuning menu:
Downloaded From TV-Manual.com Manual”