Hyundai H Lcd1502 Instruction Manual

H-LCD1502
LCD TV           LCD L?E?

2 Table of contentsTable of contents............................................................................................................................. 2
Important safety precautions ........................................................................................................... 3
General Introduction ....................................................................................................................... 5
Accessories...

3 Important safety precautions Warning
Please unplug the power cord from the AC outlet and contact our service personnel to repair underthe following conditions:xAny obvious abnormality appears in the product, such as smoky, peculiar smell or strange
sound.
xWhen a liquid has been spilled or other objects have fallen into the product.
xNo picture or sound.
xCover or panel is broken.
xAlthough you have operated the product by following the operating instructions, it still cannot
wo rk no rmally....

4 mix old and new batteries, and do not place the batteries to burn or disassemble them. If the remote
control is unused for an extend period of time, remove batteries from the remote control.
Cords
xPlace the signal cord back of the product.
Cleaning
xUnplug the power cord from the AC outlet before cleaning the product. Do not use liquid
cleaners or aerosol cleaners and others; use the special LCD Panel cleaners. Keep the power off
before LCD panel dry completely.  Caution: Do not use volatile cleaner...

5 General IntroductionxSize of the screen 15”/38 cm
xAspect ratio 4:3
xScreen resolution: 1024x768
xBrightness: 350 cd/m2
xContrast: 450:1
xWide viewing angle 140º/140º
xResponse time: 16 ms
xColor systems: PAL, SECAM, NTSC
xDigit al co mb filt er
xNICAM Stereo, 2x2.5W
xConvenient OSD menu in Russian and English languages
xConnections: RF antenna, S-Video, Composite, headphones out, PC audio in, D-Sub (VGA)
xWide range power supply: 110-240V, 50/60Hz
AccessoriesBefore using please check the...

6 InstallationAntenna connection
1.  Connect the plug of the antenna cable or CATV cable to the cable (not provided with this unit),
then connect to the antenna input of this unit for best reception.
2.  If the antenna cable in your ho me is other than the above two, or you have problems in
installing the antenna, please contact your dealer.
Notes:
1.  Current outdoor antenna or cable TV usually use 75 Ohm coaxial antenna cable. For better
reception suggest using this kind of antenna cable.
2.  Flat...

7ControlsFront panel
1. Speakers
2.  POWER button
3.  Power indicator/Remote sensor
4.  TV/AV button
5.  MUTE button
6.  MENU button
7.  PROGRAM UP button
8.  PROGRAM DOWN button
9.  VOLUME UP button
10.  VOLUME DOWN button 

8 Back panel       1        2        3456   71.12V DC power: plug the output of DC 12V adapter.2.PC: Connect a PC via a VGA cable.3.S-VIDEO input: Connect S-VIDEO, use same AUDIO input as AV input.4.AV: connect AUDIO (R/L) and VIDEO input signal from signal source such as DVD.5.PC audio in: audio input to be connected to PC.6.Earphone: audio output, speakers will be muted when ear phone plugged7.ANTENNA input (75 Ohm): Connect a coaxial cable to receive signal fro m the antenna orcable.Remote controller...

9 General operationsTurning ON/OFF
1.  Plug the end of the power cord into an appropriate wall outlet and connect the antenna cable or
CATV cable.
2.  Turn on the TV. Switch on the POWER button on the front panel of TV to connect AC power.
When the power of the TV is connected, the power indicator lights up in red, the TV is in
standby mode, press the POWER button on the RC or front panel to switch the set to normal
operation mode.
3.  Turn off the TV. Press the POWER button on the RC or front panel to...

10 FAV
Press the FAV. button on the RC repeatedly, it will select FAV. channel in cycle.
Q.VIEW
Press Q.VIEW button on the RC will switch to last program or source you just watch.