Husqvarna X 4000 Manual
Here you can view all the pages of manual Husqvarna X 4000 Manual. The Husqvarna manuals for Cutting System are available online for free. You can easily download all the documents as PDF.
Page 11
11 OTHER MAINTENANCE Guards Check all guards for damage and proper function daily espe- cially the blade block. Blade block and cover should be secure to the saw and not damaged. Lexan side covers on the blade block should move freely up and down. Diamond blade Inspect diamond blades daily for damage, cracks, secure fit to the arbor, loss of segments, warping or overheating. If any blade shows any of these problems, discard the blade and never use. Saw controls Inspect all controls for proper...
Page 12
![Page 12
12
As concrete hydrates or cures and begins to set, it develops internal st\
resses which may cause random cracks. Random
cracks cast doubt on the quality and workmanship of the concrete. Contra\
ction joints are cut in concrete to relieve these
stresses before they seek their own relief in the form of random crack. \
The Soff-Cut Ultra Early Entry system controls random
cracking through the early timing of a saw cut at predetermined location\
s to create weakened planes in the concrete that...](http://img.usermanuals.tech/thumb/38/104638/w300_x-4000-manual-1524569821_d-11.png "Page 12
12
As concrete hydrates or cures and begins to set, it develops internal st\
resses which may cause random cracks. Random
cracks cast doubt on the quality and workmanship of the concrete. Contra\
ction joints are cut in concrete to relieve these
stresses before they seek their own relief in the form of random crack. \
The Soff-Cut Ultra Early Entry system controls random
cracking through the early timing of a saw cut at predetermined location\
s to create weakened planes in the concrete that...")
12 As concrete hydrates or cures and begins to set, it develops internal st\ resses which may cause random cracks. Random cracks cast doubt on the quality and workmanship of the concrete. Contra\ ction joints are cut in concrete to relieve these stresses before they seek their own relief in the form of random crack. \ The Soff-Cut Ultra Early Entry system controls random cracking through the early timing of a saw cut at predetermined location\ s to create weakened planes in the concrete that...
Page 13
![Page 13
13
“ The timing of concrete operations - especially finishing and jointing - is critical”, states a quote from the foreword of
the American Concrete Institute (ACI) 302.1 R-96. It goes on to say that “\
Failure to address this issue can contribute to unde-
sirable characteristics in the wearing surface as cracking...” (It m\
entions other problems).
The patented Soff-Cut Ultra Early Entry system has revolutionized the method used to con\
trol random cracking. While Soff-
Cut is being specified more...](http://img.usermanuals.tech/thumb/38/104638/w300_x-4000-manual-1524569821_d-12.png "Page 13
13
“ The timing of concrete operations - especially finishing and jointing - is critical”, states a quote from the foreword of
the American Concrete Institute (ACI) 302.1 R-96. It goes on to say that “\
Failure to address this issue can contribute to unde-
sirable characteristics in the wearing surface as cracking...” (It m\
entions other problems).
The patented Soff-Cut Ultra Early Entry system has revolutionized the method used to con\
trol random cracking. While Soff-
Cut is being specified more...")
13 “ The timing of concrete operations - especially finishing and jointing - is critical”, states a quote from the foreword of the American Concrete Institute (ACI) 302.1 R-96. It goes on to say that “\ Failure to address this issue can contribute to unde- sirable characteristics in the wearing surface as cracking...” (It m\ entions other problems). The patented Soff-Cut Ultra Early Entry system has revolutionized the method used to con\ trol random cracking. While Soff- Cut is being specified more...
Page 14
14 TROUBLESHOOTING ENGINE RUNS ROUGH, BACK FIRES OR CAN NOT REACH FULL SPEED - Check if there is fuel in the tank and it is the correct fuel. Make sure there is no water in the fuel. - Check that the spark plugs are clean and properly gapped. - Check that choke is in the “off” position after engine is warm. - Check that air filter is not dirty or plugged. - Check that the throttle lever is properly set. ENGINE WILL NOT START - Check that the rocker switch is in the “on” position. - Check if there...
Page 15
EC DECLARATION OF CONFORMITYHusqvarna AB, SE-433 81 Göteborg, Sweden, tel: +46-31-949000, declares under sole responsibility that the Husqvarna Soff-Cut 4000 dating from 2016 serial numbers and onwards (the year is clearly stated on the rating plate, followed by the serial number), complies with the requirements of the COUNCILíS DIRECTIVE: • of May 17, 2006 ”relating to machinery” 2006/42/EC • of February 26, 2014 ”relating to electromagnetic compatibility” 2014/30/EU. • of May 8, 2000 ”relating to...
Page 16
www.husqvarnacp.com 1153475-262016-02-19 ´®z+UOT¶6§¨ ´®z+UOT¶6§¨ Original instructions
All Husqvarna manuals