Husqvarna Designer 1 Instruction Manual

61
Utility/Garment Sewing
20 Flatlock  
Decorative hems and overlapped seams, belts 
and bands. For medium/heavy stretch fabrics.
21 Elastic/Casing stitch
For overlapped seams in tricot. To sew casing 
over narrow elastic.
22 Reinforced zigzag
For joining fabric edge to edge or overlapping in 
leather.
23 Baste stitch
For joining two pieces of fabric with long a stitch 
length and reduced thread tension.
24 Elastic blind hem 
Invisible hems in stretch medium and   heavy 
fabrics.
25 Woven blind hem...

62Utility/Garment Sewing
Menu S
4-Way Stitches
The four way mending stitch allows you to 
stitch several sturdy stitches in four different 
directions. You have a choice of 15 different 4-
way stitches. You can select the one that is per-
fect for the weight and type of fabric. This is es-
pecially helpful when patching pant legs on the 
free arm. The 4-Way stitches are pro gram med at 
a fi xed length and width.
Fabric: Woven heavy, two pieces, one a patch
Touch: Woven heavy on your Sewing Advisor,
Menu...

63
Embroidery 

64Embroidery
Embroidery
Creative Embroidery from 
Husqvarna Viking
Down through the ages, people all over the world 
have enjoyed stitching embroidery designs to 
personalize and embellish clothing, table linens 
and special heirlooms. Early embroideries were 
stitched by hand. Today your  Husqvarna Viking 
Designer I embroiders your design effortlessly.
Embroidery unit
1. Embroidery unit socket
2. Embroidery  arm
3. Embroidery hoop attachment
4. Embroidery unit release button 
Embroidery Unit Carrying...

65
Embroidery
Built-in Disk Drive
Insert: Slide the embroidery disk into the built-
in disk drive on the side of the machine.
Eject: Push the but ton on the side of the mach-
  i ne to eject the disk. 
Removing the Embroidery unit
1. To put the embroidery arm in the rest po si tion 
to store it in the embroidery case, touch 
   (the needle up/down function button). The 
embroidery arm will move to the rest po si tion. 
Switch off the machine.
2. To release the unit, raise the large button at 
the right...

66Embroidery
Hoop the fabric
1. Select Large Hoop 150x240 mm (6x9,6"), Stan-
  dard Hoop 100x100 mm (4x4") or Mega Hoop 
360x150 mm (14,4x6") depending on the size 
of your de sign. Always use the size that is 
shown on the embroidery screen menu.
2. Loosen the screw on the larger outer hoop. 
Place the hoop on a fi rm fl at surface with the 
screw on the lower right. There is a small 
arrow in the center of the lower edge of the 
hoop which will line up with a small arrow on 
the inner hoop....

67
Embroidery
Embroidery Template
Because the embroidery designs are pictured 
actual size in the Embroidery Booklet it is easy 
to place the embroidery on your garment or 
project. Use the embroidery template size that 
corresponds with hoop size.
1. Place the template over the picture of the 
selected design in the Embroidery Booklet.
2. Use the template pencil to trace the outline of 
the design onto the template.
3. Place the template on the project to be em-
broidered and mark the center point,...

68Embroidery 

69
Embroidery
Getting Started
1. Slide on the Embroidery 
Unit.
2. Turn on Designer I.
3. Calibrate the unit by pres-
  sing 
 
 on the pop-up 
menu.
4. Slide Sampler Disk 100--
disk 1(4) (embroidery de-
signs) into the Built-in Disk Drive on the right 
side of the machine.
5. Touch 
 
. An hourglass appears on the 
screen as the de sign menus are brought up on 
the screen. 
6. Touch 
 
. An hourglass appears as the 
designs are brought up on the screen.
7. Touch  design 
 
. An hourglass appears as 
the...

70Embroidery
Embroidery Screen Menus
The embroidery screen menus give information 
and options for the design you have selected.
Embroidery name/number  D100 4 04
D100 is the disk, 4 is the menu number, 04 is 
the design number.
Total number of stitches   
 
Embroidery size 
 
  
 
Hoop-size 
   
Use the standard hoop as recommended.
You can select a different hoop size from the 
orange buttons. The grey buttons are not avai-
lable because the design would be too large for 
the hoop. Select the size of...