Husqvarna 325l X Manual

English – 21
MAINTENANCE
Weekly
maintenance
1. Check the starter, the
starter cord and the return
spring.
2. Make sure that the
vibration damping
elements are not damaged.
3. Clean the outside of the
spark plug. Remove and
check the electrode gap.
Adjust the gap to 0.5 mm
or change the spark plug.
4. Clean the cooling fins on
the flywheel.
5. Clean or replace the
muffler’s spark arrest
screen (not on mufflers
with a catalytic converter).
6. Clean the carburettor area.
7. Clean the cooling fins on
the...

22 – English
TECHNICAL DATA
325L-X/L-XT
1,50/24,5
1,34/34
1,06/27
2 700
11 000-11 700
8 014
0,9 kW/ 9 000 rpm
Ye s
Ye s
Walbro MB 20
Champion RCJ 7Y
0,02/0,5
Zama C1Q
1,06/0,5
9.0/4,1    L-XT: 9,7/4,4
92/98
109/109
1,5/1,4 L-XT: 1,5/1,4
2,0/1,8 L-XT: 2,4/2,2
2,5/4,8 L-XT: 2,5/4,8
4,9/8,0 L-XT: 5,8/7,6
322L
1,33/21,7
1,26/32
1,06/27
2 700
11 000 - 11 700
8 014
0,7 kW/ 9 000 rpm
Ye s
Ye s
Walbro MB 20
Champion RCJ 7Y
0,02/0,5
Zama C1Q
1,06/0,5
8,4/3,8
92/98
109/109
1,5/1,4
2,0/1,8
2,5/4,8
4,9/8,0
Technical...

English – 23
Technical data
Engine
Cylinder capacity, cu. in/cm3
Cylinder bore, inch/mm
Stroke length, inch/mm
Idling speed, rpm
Recommended max. speed, rpm
Speed of output axle, rpm
Max. engine output, acc. to ISO 8893
Catalytic converter muffler
Speed-regulated ignition system
Ignition system
Manufacturer/type of ignition system
Spark plug
Electrode gap, inch/mm
Fuel lubrication system
Manufacturer/type of carburettor
Fuel tank capacity, US pint/litres
Weight
Weight without fuel, cutting tool and...

24 – English
EU declaration of conformity (Only applies to Europe)
(Directive 98/37/EC, Annex II, A)
We, Husqvarna AB, S-561 82 Huskvarna, Sweden, tel: +46 36-146500, declare under sole responsibility that the
clearings saws Husqvarna 322C, 322L, 325C-X, 325L-X/L-XT and 325CX from 1999’s serial numbers and onwards (the
year is clearly stated in plain text on the type plate with subsequent serial number), are in conformity with the following
standards or other normative documents following the provisions...

English – 25
1 Super Auto II
Super Auto II 12
3
4
5
6
78
9
10
4,0 m
  13
2,4 mm
.095
~2,0 m
6,5

66


15 cm15 cm 

26 – English
1 Tri Cut
2
3
4
5
67
8>20mm
>20mm
!
B
A
6 Nm
X 10 

English – 27
1 Trimmy H II
2
3
4
5
67
8
9
7,5 m
  25
2,0-2,4 mm
.080-.095
12
 15 cm
    6
~ 3,7 m
   12
 15 cm
    6 

28 – English
1 Trimmy Hit
23
4
5
6
7
89
10
11
“Click”
“Click”
7,0 m
   23

  12 cm
      5
~ 3,5 m
     11
15 cm
    6


2,0-2,4 mm
.080-.095
~ 15 cm
      6 

English – 29
1 Trimmy Hit Junior
2
5
6
7
89
10
12
“Click”
3
4
5,75 m
   19
2,0-2,4 mm
.080-.095
15 cm
     6
~ 2,8 m
    9
1.)
2.)
11
15 cm
     6
15 cm
     6 

30 – English
1 Trimmy Hit Pro
2
5
6
7
89
10
12
“Click”
3
4
7,5 m
   25
2,0-2,4 mm
.080-.095
15 cm
     6
~ 3,7 m
    12
1.)
2.)
11
15 cm
     6
15 cm
     6