HP Z 440 Owners Manual
Here you can view all the pages of manual HP Z 440 Owners Manual. The HP manuals for Computer Equipment are available online for free. You can easily download all the documents as PDF.
Page 71
HP Z440 Workstations t LSI 9217-4i4e RAID controller guidelines See HP Z440 Workstation system board components on page 5 to determine the location of system board connectors. NOTE:Hard drives attached to RC J8 are designated by the 9217-4i4e BIOS to be boot devices. If the hard drive connected to RC J8 is a member of a RAID array, the RAID array is the boot device.System board connector Drive installation scenarios123RC – Port 0SAS HDD1SAS HDD1–BSAS HDD1–BRC – Port 1SAS HDD2SAS HDD2–DSAS HDD2–DRC –...
Page 72
HP Z640 Workstations t Intel AHCI SATA controller guidelines See HP Z640 Workstation system board components on page 11 to determine the location of system board connectors. NOTE:sSATA port 0 is the default port for the boot drive (the default port can be changed manually in the BIOS).RAID card (RC) or system board (SB) connectorDrive installation scenarios123RC J8 SAS HDD 1SAS HDD 1-BSATA HDD 1-BRC J7SAS HDD 2SATA HDD 2-DSAS HDD 2-DRC J6SAS HDD 3SATA HDD 3-DSAS HDD 3-DRC J5SAS HDD 4SATA HDD 4-DSAS...
Page 73
HP Z640 Workstations t LSI 9217-4i4e RAID controller guidelines See HP Z640 Workstation system board components on page 11to determine the location of system board connectors. NOTE:Hard drives attached to RC J8 are designated by the 9217-4i4e BIOS to be boot devices. If the hard drive connected to RC J8 is a member of a RAID array, the RAID array is the boot device.System board connectorDrive installation scenarios123RC – Port 0SAS HDD 1SAS HDD 1-BSATA HDD 1-BRC – Port 1SAS HDD 2SATA HDD 2-DSAS HDD...
Page 74
HP Z840 Workstation cabling guidelines See HP Z840 Workstation system board components on page 18 to determine the location of system board connectors. NOTE:Port 0 is the default port for the boot drive (the default port can be changed manually in the BIOS). System board connector Drive con
Page 75
Memory Supported DIMM con
Page 76
CAUTION:DIMMs and their sockets are keyed for proper installation. To prevent socket or DIMM damage, align these guides properly when installing DIMMs. HP Z440 Workstation DIMM installation order Install DIMMs in this order. NOTE:If you install DIMMs of di
Page 77
HP Z640 Workstation DIMM installation order Install DIMMs in this order. NOTE:If you install DIMMs of di
Page 78
HP Z840 Workstation DIMM installation order Install DIMMs in this order. NOTE:If you install DIMMs of di
Page 79
Power supply Power supply specL
Page 80
HP Z640 power supply specL