HP W2338h User Guide

Operating the Monitor
User’s Guide4–5
Icon
Main Menu 
Options
Submenu OptionsDescription 
Switch Video Input 
(select models only)Switches the video input signal source when the monitor is 
connected to two active and valid video sources. Switching 
video input sources may take several seconds.
Brightness Adjusts the brightness level of the screen.
Contrast Adjusts the contrast level of the screen.
Image Control Adjusts the screen image. Also enables or disables the ambient 
light sensor (select...

Operating the Monitor
4–6User’s Guide
Color Selects the screen color. The factory default is 6500 K or 
Custom Color, depending on the model.
9300 K Changes to slightly blueish white.
6500 K Changes to slightly reddish white.
Custom Color Selects and adjusts your own color scales:
R — Sets your own red color levels.
G — Sets your own green color levels.
B — Sets your own blue color levels.
sRGB Sets your screen colors to adapt to the color standards used in 
the image technology industry.
Quick View...

Operating the Monitor
User’s Guide4–7
Management 
(continued)Power-On Status 
DisplayDisplays the operating status of the monitor each time the 
monitor is powered on. Select the location to which to display 
the status:
To p
Middle
Bottom
Off
The factory default is Top or Off, depending on the model.
DDC/CI Support Allows the computer to control some OSD menu features such 
as brightness, contrast, and color temperature. Set to:
On
Off
The factory default is On.
Bezel Power LED Turns the light (LED) in...

Operating the Monitor
4–8User’s Guide
Selecting Video Input Connectors
The input connectors are:
■VGA connector (analog)
■DVI-D connector (digital)
■HDMI connector
The monitor automatically determines which inputs have valid video signals, and displays the image.
You can connect the VGA cable, the DVI-D cable, or both. If both cables are installed, the default input selection is 
DVI. The HDMI cable is in place of the DVI-D cable. The source of input can be switched using the Switch Video 
Input option...

Operating the Monitor
User’s Guide4–9 To obtain the best results:
1.Allow the monitor to warm up for 20 minutes before adjusting.
2.Display the adjustment-pattern application provided on the CD.
3.Access the OSD menu, then select Image Control.
4.Set the main Clock settings correctly first, because the Clock Phase settings depend on the main Clock setting.
When adjusting the Clock and Clock Phase values, if the monitor images become distorted, continue adjusting 
the values until the distortion...

Operating the Monitor
4–10User’s Guide
Task Light (Select Models)
The task light sheds warm white light in front of the monitor. It is located just to the left of the OSD front panel buttons.
Press the button to operate the light:
■Press once for 100% illumination
■Press again for 75% illumination
■Press again for 35% illumination
■Press a fourth time to turn off the task light
Webcam (Select Models)
Install CyberLink YouCam software and driver from the CD that came with your monitor.
Use your webcam...

Operating the Monitor
User’s Guide4–11
Capturing Webcam Video and Snapshots
To use CyberLink YouCam after you install it from the provided CD:
1.Click the Windows Vista start button.
2.Click All Programs, CyberLink YouCam, and then click CyberLink YouCam again.
3.Click Tu t o r i a l s to view an instructional video.
Having a Video Chat or Making Conference Calls
To set up a video chat, you must have a connection to the Internet, an ISP, and software that enables you to make 
video calls over the...

Operating the Monitor
4–12User’s Guide
 

User’s Guide5–1
5
Operating the Digital Picture Frame Card Reader
(Select Models)
The Digital Picture Frame (DPF) card reader can be used when your computer is on or off. When your computer is on, 
it can search through the memory cards inserted in the DPF card reader. When your computer is off, the DPF card 
reader is capable of operating on its own; when you insert a supported memory card or USB flash drive into the DPF 
card reader, it allows you to view photos, play movies, and listen to music on...

Operating the Digital Picture Frame Card Reader (Select Models)
5–2User’s Guide
Using the Monitor Menu with the Remote Control
The remote control is designed for easy navigation through all the choices for the DPF card reader.
1.Point the remote control at the remote control sensor on the display; the receiver is in the bezel at the bottom 
center of the display. Press the power button (A) to activate the DPF menu on the DPF card reader display. The 
function buttons allow you to: view pictures (B),...