HP W20 User Guide

External Controls 
 
 
A – (Minus) button Navigates backward through the OSD menu and decreases adjustment levels.
If the OSD menu is inactive, activates the Volume decrease. 
B + (Plus) button Navigates forward through the OSD menu and increases adjustment levels. 
If the OSD menu is inactive, activates the Volume increase. 
C Menu button Opens, selects, or exits the OSD menu. 
D Source button VGA / DVI select. 
E Auto button Automatically fine-tunes the image quality. 
F Power button Turns the monitor...

 
Back to Contents Page
Settings 
Setting the Optimal Resolution  Adjusting the Volume  Locking and Unlocking the OSD   
Adjusting OSD Settings
 
Setting the Optimal Resolution 
The recommended resolution for this monitor is 1680 x 1050. To configure the monitor to this resolution, 
complete the setup procedure and make sure that the monitor is connected to the computer. Turn the monitor on 
and do the following: 
1 Click Start. 
2 Click Settings. 
3 Click Control Panel. 
4 Double-click Display. 
5...

Adjusting On-Screen Display Settings 
Use the OSD menu to adjust the screen image and change settings. To access the OSD menu: 
1 If the monitor is not already on, press the power button to turn the monitor on. 
2 Press the menu button to activate the OSD menu. 
3 Press the – (minus) and + (plus) buttons to navigate through the functions. Once the desired function is 
highlighted, press the menu button again to activate it. If the selected function has a sub-menu, it displays. 
Press – (minus) or +...

OSD Menu 
The table below shows the OSD menus and their functions at each level. 
 OSD Menu Levels 
 
Level 1 Level 2 Level 3 Factory Preset 
Brightness Adjustment Scale  Y 
 Reset   
 Cancel   
 Save and Return   
Contrast Adjustment Scale  Y 
 Reset   
 Cancel   
 Save and Return   
Volume Adjustment Scale  Y 
Image Control Auto Adjustment “Adjusting” Message Y 
 Horizontal Position Adjustment Scale Y 
 Vertical Position Adjustment Scale Y 
 Custom Scaling Fill to Screen 
Fill to Aspect Ratio...

 OSD Menu Levels (continued) 
 
Level 1 Level 2 Level 3 Factory Preset 
Language Deutsch   
 Simplified Chinese   
 Japanese   
 English  English 
 Español   
 Français   
 Italiano   
 Nederlands   
 Cancel   
 Save and Return   
Management Power Saver On / Off Selection Y 
 Power On Recall On / Off Selection Y 
 Mode Display On / Off Selection Y 
 Power-On Status Display On / Off Selection Y 
 DDC/CI Support On / Off Selection Y 
 Sleep Timer Timer Set Menu Y 
 Default Video Input Analog — VGA...

 
Back to Contents Page
Installing Drivers and Using the Auto-Adjustment Feature 
 
Downloading Drivers and Software 
To download the latest version of drivers and software files from the HP Support Web site: 
1 Refer to: http://www.hp.com/support 
2 Select your country/region. 
3 Select Download Drivers and Software. 
4 Enter the model number of your monitor. The software download pages for your monitor will be displayed. 
5 Download and install the driver and software files using the instructions in...

 
Back to Contents Page
Technical Support FAQs 
 
 
Technical Support FAQs (Frequently Asked Questions) 
Problem & Question Possible Solutions 
Power LED is not on. • Make sure the power button is on and the power cord is properly 
connected to a grounded power outlet and to the monitor. 
No Plug & Play. • In order for the Plug & Play feature of the monitor to work, you 
need a Plug & Play compatible computer and video card. Check 
with your computer manufacturer. 
• Check the monitor’s video cable and...

 
Problem & Question Possible Solutions 
Missing one of the primary colors (red, 
green, or blue). 
• Inspect the monitor’s video cable and make sure that none of the 
pins are bent. 
• Make sure the monitor’s video cable is properly connected to the 
computer. 
Screen image is not centered or sized 
properly. 
• Adjust horizontal and vertical screen position. 
• For VGA input, the auto-adjustment function may fix this problem. 
Picture has color defects (white does 
not look white). 
• Adjust RGB color...

19 
 
Back to Contents Page 
Specifications 
HP w20 • HP w22Preset Display ModesPower Cord Set RequirementsPin Assignments
Plug and Play DDC2B Feature
 
 
All specifications represent the typical specifications  provided by HP’s component manufacturers; actual 
performance may vary either higher or lower. 
 
HP w20 
Display Type  20.1 inches, TFT LCD  51.11 cm 
Viewable Image Size  20.1-inch diagonal  51.11 cm 
Tilt –5° to 20°  
Face Treatment  Antiglare polarizer with hard coating 
(select models only)...

20 
 
HP w22 
 
Display Type  22 inches, TFT LCD  55.868 cm 
Viewable Image Size  22-inch diagonal  55.868 cm 
Tilt –5° to 20°  
Face Treatment Antiglare polarizer with hard coating 
(select models only)   
Maximum Weight (unpacked)  13.89 lb.  6.3 kg 
Dimensions (including pedestal) 
  Height 
  Depth 
  Width  
17.18 inches 
9.84 inches 
20.74 inches   
436.37 mm 
249.94 mm 
526.8 mm 
Optimum Display Resolution  1680 x 1050 (60 Hz)   
Text Mode  720 x 400   
Dot Pitch  0.282 (H) x 0.282(V) mm...