HP Sw450 User Manual

							67
Access the files in the camera by your PC.
7. 
The camera’s internal memory and memory card would display as removable drives 
•	
in PC.
After the connection, no image is displayed on the LCD monitor.
•	 
						

							68
Connecting the Camera to a Printer
Print your photos directly using a PictBridge compatible printer.
Turn on your Printer. Check that the printer is turned on, there is paper in the printer, and there are no printer 
1. 
error messages.
Connect one end of the USB cable to the printer while the other end to USB terminal on the camera.
2. 
The USB mode menu appears on the screen. Select 
3.  Printer by using the  or  key and press the OK 
button  
.
Enter the print mode and print the selected images. 
4. 
For details on the following page “ Setting the Print Mode Menu”.
Setting the Print Mode Menu
Print Mode menu appears on the screen after the connection between a printer and your camera is established. 
Print Mode includes three major settings:
 
•	 Print Select . An image can then be selected to print.
 
•	 Print All.  Prints all images.
 
•	 Print Index. Prints all images as thumbnails. 
						

							69
To set Print Select
Use the 
1.  or  keys to scroll and select an image for 
printing. 
Specify the number of copies. Use the 
2. 
 or  key to 
increase/decrease number.
Press the 
3.  FUNC button  
 to toggle between turning on/ 
off the date stamp.
Press the 
4.  OK button 
 to enter printer settings.
To set Print All and Print Index
Repeat the same steps 2 to 4, then enter printer settings. 
To set Printer Settings
Use the 
1.  or  key to specify a print option.
Modify paper size and quality by the 
2. 
 or  keys. Available 
setting:
 
•	 Paper size:  Default / A4 / 4”x 6”
 
•	 Quality:  Default / Fine / Normal
Select 
3.  Print on the screen for printing. Or  Cancel to go back 
Print Mode.
Start Printing
LCD monitor appears “Now printing…”.
•	
Or press 
•	 Menu button  
 to stop printing anytime.
After the printer has printed all the photos that had been selected, disconnect the 
camera from the printer. 
						

							70
Appendix
About Folder and File Names
Your camera automatically creates specific directory of folder in the internal memory cards to organize captured 
images, videos and audio files.
File Naming
File names begin with “HPIM” and followed by a 4-digit number that increases in sequence. File numbering starts 
from 0001 when a new folder is created.
If the highest folder number is 999 and the highest file number exceeds 9999, the camera will display the warning 
message “Folder cannot be created ”. When this happens, try one of the following ways:
Reset the file number. See “
•	 Setting File Numbering” on page 65.
Plug in a new memory card.
•	
Do not change the folder and file names in the memory card using your PC. It may 
be unable to playback the data using the camera. 
						

							71
Troubleshooting
ProblemCause and/or Action
Camera does not turn on. One or both of the battery may be exhausted. Replace the battery.
Camera turns off automatically. Press any button except the Power button to power on the camera.
LCD turns blank. Press any button except the Power button to turn on the LCD.
Empty battery icon is displayed 
on the LCD, and then the 
camera turns off. One or both of the battery may be exhausted. Replace the battery.
LCD screen displays ‘No images 
in memory’. The image file on the memory card. Image file format may not be supported. 
LCD screen displays ‘Not 
available for this file’. Function is only available for specific file types. File format is not supported. 
LCD screen displays ‘Memory 
full’. Memory card is full. Replace the memory card with a new one or delete 
unnecessary images.
LCD screen displays ‘File 
locked’ This file is locked. Unlock the file.
LCD screen displays ‘Card 
locked’. The memory card is protected. Remove the card and slide the write-protect 
switch to it’s unlock position.
LCD screen displays ‘CARD HAS 
WRONG FORMAT’. The memory card is protected. Remove the card and slide the write-protect 
switch to it’s unlock position.
LCD screen displays ‘Copy 
error’. The memory card is protected. Remove the card and slide the write-protect 
switch to it’s unlock position. The memory card is full. Replace card or delete 
unnecessary files.
The lens is extended and will 
NOT retract. Do not force the lens to go back. The type of the battery used may be incorrect 
or the battery power level is too low. Change the battery or charge the battery 
before using the camera. 
						

							72
Getting Help
Should you have a technical support question or your HP Digital Camera require service within the warranty 
period, please contact the original point of purchase or an authorized HP reseller in your country. If service 
is not available at those locations, please contact an HP Branded Product warranty agent from the support 
contact list provided below. A service agent will work with you to troubleshoot your issue and if necessary, 
issue  a  Return  Material  Authorization  (RMA)  number  in  order  to  replace  your  HP  Branded  Product.  For 
warranty  claims,  you  will  be  required  to  provide  a  copy  of  your  original  dated  sales  receipt  as  proof  of 
purchase  and  the  issued  RMA  number.  You  will  be  responsible  for  shipping  charges  when  shipping  the 
product  to  the  service  center.  The  service  agent  will  provide  you  with  an  address  and  you  will  also  be 
responsible for any shipping charges to the warranty service center. Once your product is received by this 
service center, a replacement unit will be shipped back to you typically within 5 business days.
Contact/phone Support:
LanguageContact/phone Support:
Chinese [email protected]
[email protected]
Japanese [email protected]
Korean [email protected]
Deutsch [email protected]
English [email protected]
Español [email protected]
Français [email protected]
Italiano [email protected]
Nederlandsk [email protected]
Português [email protected]
Svenska [email protected] 
						

							73
Contact/phone Support:
CountryLanguage Number
Europe Region (EMEA)
België Nederlandsk/ Deutsch + 32 2700 1724
Deutschland Deutsch + 49 6950073896
España Español + 34 914533458
France Français + 33 171230454
Ireland English + 353 1850882016
Italia Italiano + 39 269682189
Nederland Nederlandsk + 31 202015093
Schweiz Deutsch/ Français/ Italiano + 41 18009686
UK English + 44 2073652400
North America
United States English 1.866.694.7633
Canada English and French 1.866.694.7633
Country LanguageCity Number
México EspañolMexico City
52.55.1204.8185
Guadalajara 52.33.1031.3872
Monterrey 52.81.1107.2639
Venezuela EspañolCaracas 58.212.335.4574
Colombia EspañolBogota 57.1.508.2325
Perú EspañolLima 51.1.705.6232
Chile EspañolSantiago 56.2.581.4977
Brasil PortuguêsSao Paolo 55.11.5504.6633
Argentina EspañolBuenos Aires 54.11.6091.2399 
						

							P/N: 7525C00141A