HP Sw450 User Manual
Have a look at the manual HP Sw450 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1114 HP manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
27 The table below shows the Photo Size values for still images: IconPixel Size Printing Size Suggestion 4000 x 3000 A2 Size 3648 x 2432A2 Size 3264 x 2448A3 Size 2592 x 1944A4 Size IconPixel Size Printing Size Suggestion 2048 x 1536 4" x 6" 1920 x 1080HDTV 640 x 480E-mail Quality This allows the quality (compression) at which the photo is captured to be increased or decreased. The quality determines the amount of compression applied to the photos. Superfine setting results in a more detailed image. However, the higher the quality, the more memory space is required in memory. EV Compensation Images can be captured with the overall scene intentionally made brighter or darker. These settings are used when a suitable brightness (exposure) cannot otherwise be obtained in circumstances where the difference in brightness between the subject and the background (the contrast) is large, or when the subject that you wish to capture is very small within the scene. Available for still images only. To adjust EV settings, press the • or keys to increase/decrease the value. As adjustments to the settings are made, the LCD screen synchronously displays the image applying the EV settings. Press the OK button to save and apply changes. The available settings are: 0EV / +2.0EV / +1.7EV / +1.3EV / +1.0EV / +0.7EV / +0.3EV / 0EV / -0.3EV / -0.7EV / • -1.0EV / -1.3EV / -1.7EV / -2.0EV White Balance This sets the white balance for a variety of lighting conditions and permits photos to be captured to the desired level. As adjustments to the settings are made, the LCD • screen synchronously displays the image applying the AWB settings. Press the OK button to save and apply changes. Below is a table with a description of the different • settings.
28 IconItem Description Auto The camera automatically adjusts the white balance. DaylightIdeally used for bright sunny conditions. CloudyIdeally used for cloudy conditions. TungstenIdeally used for indoor photos with tungsten or halogen lighting without a flash. Fluorescent 1Ideally used for indoor photos with reddish fluorescent lighting conditions. Fluorescent 2Ideally used for indoor photos with bluish fluorescent lighting conditions. Manual Used when light source cannot be specified. Press the Shutter button for the camera to automatically adjust the appropriate white balance setting according to the environment. ISO This sets the sensitivity of the sensor for capturing photos to compensate for various lighting situations. When the sensitivity is raised (and the ISO value is increased), photography in dark or dim lit locations are improved. However, this may result in a more pixelated (grainier) photo. Use a higher ISO setting in dim conditions and a lower • ISO setting in brighter conditions. Read the text at the top to assist in determining the desired result. Available settings are: Auto, 100, 200, 400, 800, 1600, • 3200 , 6400 . If the Stabilizer is enabled, ISO is automatically set to Auto and cannot be adjusted. To adjust ISO disable Stabilizer first.
29 Metering The Metering function allows adjustment to select the area of the subject or frame by which the camera measures light to record still images or video.As adjustments to the settings are made, the LCD • screen synchronously displays the image applying the metering settings. Press the OK button to save and apply changes. Below is a table with a description of the different • settings. Icon ItemDescription Multi The camera measures the exposure readings from multiple points in the subject area and selects the settings that best match this situation. Center The camera measures the average light from the entire frame but gives greater weight to the subject matter at the center. The camera will select the settings that best match the situation. Spot The camera selects the exposure value based on the center of your picture and selects the appropriate settings to match. Color Mode This feature allows adjustment to record photos and videos in different colors and tones for a more artistic effect. Tinting an photo or video color can make them appear more vivid. As adjustments to the settings are made, the LCD screen • synchronously displays the image applying the Color settings. Press the OK button to save and apply changes. Below is a table with a description of the different settings. • Icon ItemDescription Normal The camera records normally. VividThe camera captures with more contrast and saturation emphasizing the bold colors. Sepia Used to add the effect of an “aged” photo or video. B&W Used to remove color and capture in black and white. Vivid Red Images are tinted red. Ideally used to record images like flowers and cars to make them more vivid.
30 Vivid GreenImages are tinted green. Ideally used to record images like mountains and lawns to make them more vivid. Vivid Blue Images are tinted blue. Ideally used to record images like the sky and the ocean to make them look more vivid. Using the Record Menu In Photo mode, access to the Record menu is done by simply by pressing the Menu button on back of the camera. When the menu is displayed, use the 4-way navigation control and the OK button to move through menu selections and apply the desired settings. To close the menu anytime, press the menu button again. Record Menu The Record menu allows changes to the scene modes, and setup other capture settings. To go to Record Menu: Set the mode switch Photo Mode [ ]. Press 1. Menu button to launch the Record Menu. Use the 2. or keys to move through the menu To select an item, press 3. . Change the submenu settings using the 4-way navigation control. 4. Press the 5. OK button to save and apply settings. Setting the Scene Mode This camera offers 32 different modes, that can assist in taking a photo with the optimal settings or desired effects. From the Record Menu, enter the 1. Scene Mode options menu. Use the left and right navigation controls to move 2. through the selections. The highlighted scene mode will either have text that describes the benefits of the mode or have a side-by -side 3. photo comparison that illustrates the benefits. The photo on the left is a typical auto mode result and the photo on the right illustrates the benefit of selecting that scene mode. It is important to note that by selecting a particular scene mode (other that Auto) will take the camera out of it’s normal automatic settings capabilities and therefore optimise various settings that match a specific scene. Press the 4. OK button to save and activate the selected scene mode.
31 It is important to return the camera to the Auto mode when finished shooting specifics conditions. This will 5. reduce the risk of taking a bad photo in normal situations. If the camera is powered off and then powered on, it will return to Auto scene mode be default. The table below shows the available scene mode settings: Icon Item Description Auto The simplest and usually safest way to shoot basic photos. Settings are automatically adjusted by the camera. Each time the camera is Powered off then on, this mode will be selected by default. This is recommended for novice photographers. Program The camera automatically adjusts suitable shooting settings like shutter speed and aperture values. However, this mode allows for manual adjustments to EV, Auto White Balance, ISO (gain), Metering, and Color effects. Intelligent Scene The camera detects the shooting conditions and automatically switches to the appropriate scene mode. Portrait This scene mode will attempt to isolate the subject by opening a wide aperture to blur the background and providing little depth of field. The subject will stand out because the background is blurry and the subject is in focus. Landscape This feature is used to emphasize wide distant scenic views. Sunset This feature enhances the red hue for recording dramatic sunrise or sunset images. Backlight This feature is best used to capture photos with a strong backlight. For example, this mode will lighten the exposure to make the face of the person in the foreground to look normal instead of dark while maintaining the clarity and brightness of the background details. Kids This feature forces the camera to select settings that will be optimal for moving kids. Red eye reduction and skin tone enhancement are also a benefit of using this mode. Night SceneThis feature is used to taking photos with night scenery background. Camera settings will be adjusted to capture brighter and more vivid night shots. For best results and reduced image blurring, the use of a tripod for this mode is strongly recommended. Fireworks This feature slows shutter speed to capture the full burst of fireworks. Another interesting use would be to take photos of night traffic. This will produce artistic head and tail light stretch effects For best results and reduced image blurring, the use of a tripod for this mode is strongly recommended. SnowThis scene mode is best used when you’re shooting against a bright background, such as snow or sand. This will enable the camera to focus on the subject instead of the background to determine the proper exposure and AWB settings for optimal results. If not selected, the subject may be too dark and the background “washed out”. Sports This scene mode will continue to capture images as long as the shutter button is pressed down. This is designed to aid for subjects in constant motion. It should only be used in adequate lighting situations because the flash will be disabled. Party This scene mode will set red-eye flash and narrow other parameters that best match typical indoor wedding/party conditions.
32 IconItem Description Candlelight This feature is used to capture warm candle light effects. Night Portrait This scene mode uses the flash and will leave the shutter open longer to get more ambient light from the background. This will help reduce typical flash pictures where the subject does not have a black/dark background. Ideally, this will produce photos that have more detail in the background. For best results and reduced image blurring, the use of a tripod for this mode is strongly recommended. Soft Skin This scene mode will set red-eye flash and other camera parameters to enhance/soften tones that produce smoother younger looking skin as well ad reduce the appearance of blemishes. FoodThis scene mode is designed to capture pictures of food in vivid colors. The Camera is set to macro mode focus and other parameters to increase saturation for enticing food images. Building This feature enhances the edges of captured images that make it ideal to highlight details of buildings. Text This feature enhances the black and white contrast normally used when capturing text images. Typically, normal photos of documents may look grey in tone. This mode will optimise settings for more color accurate results. Foliage This feature boosts the saturation of greens to give a rich color to foliage and lawns. AuctionThis feature combines up to 4 shots into a single photo and provides 4 patterns to select for usage of auction. It also selects resolution settings that produce detailed but smaller size photos that are Ideal for email attachments and online auction postings. Smile CaptureThis feature uses face tracking to auto detect faces to capture. Press the shutter button and with each smile, the camera automatically detects and takes the photo to help ensure those moments are captured. The camera will continuously take smile detected subjects until the shutter button is pressed again. Blink Detection This feature detects if the subject blinked an eye when the image is captured and gives the user an option whether to save the photo or not. Pre-composition Compose the desired background and capture the shot by pressing the shutter button. A semi-transparent portion of the photo will display in the background of the LCD live display. Use this as a guide to compose the final photo. Press the shutter again to capture the final photo. Love PortraitThis feature uses face tracking to auto detect faces to capture portraits photos without the help of others. When two faces or more are detected in the same focus range, the AF is automatically activated and the camera starts a visual count down. In a few seconds, the camera automatically takes a picture. The camera will continue to snap photos as long as the two or more subjects are in range. This is a great feature to have when no one is around to assist. Self PortraitNormally, self portraits require the subject to hold the camera at arms length so that they can push the shutter button. Often the result is a too close-up self image that is over exposed and background details reduced. This mode will not require the shutter button to be press while using face detection to track one or more faces in focus range. Once the camera has made the appropriate adjustments, it will start a visual countdown In a few seconds, the camera automatically take a picture. The camera will continue to snap photos as long as the one or more subjects are in range. This feature is great to compose never before possible self portraits.
33 IconItem Description HDR This feature applies digital processing only to the necessary portion(s) of the image and preserves details in highlights and shadows with natural contrast. Aperture PriorityThis mode allows manual adjustment to aperture value. The camera automatically selects the shutter speed to match the brightness. Shutter PriorityThis mode allows manual adjustment to shutter speed. The camera automatically selects the aperture value to match the brightness. Manual Exposure This mode allows manual adjustment to shutter speed and aperture value regardless the brightness. This is recommended for experienced users only. Voice REC This mode is used to record audio clips. Slide the mode selector switch to the Voice Record icon () to enable this mode. After selecting the scene mode, the selected mode, except Voice Rec, will be added to the forefront in My Mode of Function Menu.
34 Using Intelligent Scene This feature is most useful for novice users to capture great images even without basic knowledge of photography. Simply frame the shot with the help of Intelligent Scene Mode, the camera automatically recognizes 11 kinds of scenes - Portrait, Landscape, Sunset, Macro, Text, Snow, Backlight Portrait, Backlight Portrait, Night Scene, Night Portrait and Foliage - and selects the ideal settings.Intelligent scene icon. After the camera detects the shooting conditions, this icon changes to show the detected scene mode. To enable Intelligent Scene: Select 1. from the Scene Mode submenu. Focus the camera on the subject to capture. 2. The camera detects the shooting conditions and 3. switches to an appropriate scene mode. Half press the Shutter button to focus the 4. subject. The frame turns green to indicate focus is set. Press the Shutter button to take the shot. 5. The camera changed to Landscape mode automatically. Using Kids Mode Tactically, kids are the most difficult to photograph. They tend to be highly animated and can be a real challenge to make them pay attention for more than just a second or two. To capture a great moment for your kids, just keep the camera in kid mode. The mode provides higher shutter speed and always focuses on moving subject.
35 Using Sports Mode Ideal to taking a series of sports motion images, such as a golf swing, or try to capture the images of a flying hummingbird/butterfly, be sure to switch the scene mode to sports mode. This mode provides shutter in Burst speed (Keep shooting images long as the Shutter button is pressed) which allows you to capture a sequence of pictures that are frames apart clearly. Make sure to have plenty of capacity on the memory card as it will be needed. Using Party Mode Let the Party begin! It can be difficult to get everyone on a party. Get the whole gang together, take a group or family portrait. Party mode features Red-eye reduction flash and face tracking. Miss fewer shots, and have more time to focus on enjoying the party. Using Soft Skin mode When the soft skin mode is activated, it makes wrinkles and lines look less conspicuous, while preserving resolution in areas of the picture outside of the skin. The camera detects skin color area, such as the face and processes the image to make the skin appear smooth. Using Food Mode How to share your dining experiences and comments of interesting widgets on your blog by close-up images? Just get the camera and set the scene with food mode. This mode features on macro focus and auto flash designed for close-up photography. Using Foliage Mode A scenic image, such as a garden or forest scene, that full of doll green colors is boring. In foliage mode, the greens, blues, are brilliantly enhanced making scenic pictures pop out with bright color. Using Auction Mode It’s hard and wastes a lot of time to combine several images by software. Select Auction mode and choose a pattern, then take a few shots from different angle. The camera composes a combined image in lower resolution suited to online posting.
36 Select Auction mode from Scene mode menu. 1. Use 2. or keys to choose a pattern. Press the 3. OK button to start shooting. Frame the subject and press the 4. Shutter button to take the first shot. Press the 5. OK button to continue the second shot. Or, press 6. Menu button to go back the first shot. Repeat step 4 to 6, until the pattern is filled in images. 7. Press 8. OK button to save the composed image. Or, press 9. Menu button to go back last shot. The camera save the image to memory. 10. Use USB cable or memory card reader (Please refer to “Connecting the Camera to a PC” on page 68) to transfer 11. the image to PC and upload it to website. Auction mode provides 4 kinds of pattern as follow The end photo is set to low quality and VGA (640x480) size only for the purposes of having a small files size easy for uploading.