HP Stream 8 Service Manual

3.Remove the rear-facing webcam bracket (3).
The rear-facing webcam bracket is available using spare part number 796816-001.
4.Remove the rear-facing webcam, bracket, and cable.
Reverse this procedure to install the rear-facing webcam.
Rear-facing webcam25 

Front-facing webcamDescriptionSpare part numberFront-facing webcam (2.0-MP, fixed-focus)796814-001
Before removing the rear-facing webcam, follow these steps:
1.Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, 
and then shut it down through the operating system.
2.Disconnect all external devices connected to the tablet.
3.Disconnect the power from the tablet by first unplugging the power cord from the AC outlet and then 
unplugging the AC adapter...

Button boardDescriptionSpare part numberButton board (includes cable, power button actuator, and volume button actuators)800024-001
Before removing the button board, follow these steps:
1.Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, 
and then shut it down through the operating system.
2.Disconnect all external devices connected to the tablet.
3.Disconnect the power from the tablet by first unplugging the power cord from the AC outlet and then...

Display panel cableDescriptionSpare part numberDisplay panel cable796819-001
Before removing the display panel cable, follow these steps:
1.Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, 
and then shut it down through the operating system.
2.Disconnect all external devices connected to the tablet.
3.Disconnect the power from the tablet by first unplugging the power cord from the AC outlet and then 
unplugging the AC adapter from the tablet....

Reverse this procedure to install the display panel cable.
Speakers
DescriptionSpare part numberSpeakers (include left and right speakers and cables)796818-001
Before removing the speakers, follow these steps:
1.Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, 
and then shut it down through the operating system.
2.Disconnect all external devices connected to the tablet.
3.Disconnect the power from the tablet by first unplugging the power cord from...

2.Remove the speakers (2).
Reverse this procedure to install the speakers.
System board
NOTE:The system board spare part kit is equipped with an Intel Z3735G 1.30-GHz (1.80-GHz burst mode) 
quad core processor, a graphics subsystem with UMA memory, 1.0-GB of system memory, 32-GB eMMC 
storage, and the Microsoft Windows 8.1 operating system.DescriptionSpare part numberFor use on HP Stream 8 Tablet 59xx models in Asia Pacific countries and regions 
(includes 3G connectivity)796812-371For use on HP Stream 8...

Before removing the system board, follow these steps:
1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and 
then shut it down through the operating system.
2.Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.Disconnect all external devices from the tablet.
4.Remove the back cover (see Back cover on page 18).
5.Remove the middle frame (see Middle frame on page 20).
6.Disconnect the battery cable from the system...

9.Unsolder the red and black speaker cables (4) from the system board speaker contact points (see Front-
facing webcam on page 26).
10.Remove the two Phillips PM1.3×1.6 screws (1) that secure the system board to the 
display panel assembly.
32Chapter 5   Removal and replacement procedures 

11.Remove the system board (2).
Reverse this procedure to install the system board.
WWAN antenna
DescriptionSpare part numberWWAN antenna (includes cable, transceiver, and double-sided adhesive)796823-001
Before removing the WWAN antenna, follow these steps:
1.Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the tablet.
3.Disconnect the power from the...

1.Detach the WWAN antenna transceiver from the display panel assembly. (The WWAN antenna 
transceiver is attached to the display panel assembly with double-sided adhesive.)
2.Remove the WWAN antenna cable and transceiver.
Reverse this procedure to install the WWAN antenna.
WLAN antenna
DescriptionSpare part numberWLAN antenna (includes cable, transceiver, and double-sided adhesive)796822-001
Before removing the WLAN antenna, follow these steps:
1.Shut down the tablet. If you are unsure whether the tablet...