HP Scitex FB700 User Manual

Media Settings menu
To display the Media Settings menu, press Settings on the Media page.
●General Media Settings — Media Name, Media Feed Method, Visible to Printer, Vacuum
Control, Media Roller Use, Media Weight. For instructions, see 
Configure media on page 9.
●Print Speed Specific Settings — Printing Delay, Lamp Mode. For instructions, see 
Media Wizard
on page 9.
Ink page
Figure 6-5  Ink page




To switch to the Ink page, press the Ink icon in the Activity Tray at the bottom of the screen.
1...

●Access Printheads — moves the printhead carriage to the center of the rail for inspection.
●Print Recover Jets Pattern — prints a special pattern designed to recover missing inkjets. After
printing this pattern, the prime bars are printed.
●Printhead Procedures
◦Load Ink in All Heads — fills all printheads with ink. Typically used only when installing a
new printer.
◦Fill Heads with Ink — fills the printheads that you select with ink.
◦Empty Heads (Fill With Air) — fills the printheads that you select...

System page
Figure 6-6  System page






To switch to the System page, press the System icon in the Activity Tray at the bottom of the screen.
1 About screen
●Printer model
●Embedded software (firmware) version
●IP address — enter this address in your RIP to send print jobs to the printer, and web browser to access the
Embedded Web Server.
2 Tools — displays the Tools menu. See 
Tools menu on page 37 for details.
3 Settings menu — enables you to enable printer options and adjust various warning...

User Cleaning and Maintenance
For detailed instructions, see User cleaning on page 57.
●Maintenance Reminders — displays a list of scheduled maintenance tasks, the intervals in
number of hours of printing for each task, and the elapsed printing time since the task was last
performed.
User Diagnostics
User Diagnostics presents an interactive troubleshooting program to diagnose problems before
calling technical support. It walks you through a series of tests and checks for certain printer
functions. The...

Print Menus
This option prints all of the menu options in a hierarchical tree format for reference.
Settings menu
●Localization — sets English or Metric units of measure, Time and Date formats, Vacuum
Pressure Units, and Language for data displayed by the control panel.
●Sleep Wait Time — sets the period of time to wait for a print job before going into Sleep mode.
●UV Lamps Idle Time — sets the amount of time the lamps will stay on after printing before they
are automatically turned off by the printer....

Menu tree
This menu tree reflects version 1.05 of the embedded printer software. Refer to the Release Notes for
more recent versions. Options marked with (*) are dynamically hidden depending on whether roll-fed
printing is enabled.
Printing page
Calibrate Printer
●Auto Calibrations
◦AutoBidi Calibration
◦Auto Head X Calibration
◦AutoJet Calibration
◦Full AutoSet
◦AutoSet Summary
●Manual Calibrations
◦Media Feed Calibration
◦Manual Bidi Registration
◦Printhead X Calibration
◦Manual Jet Mapping
◦Jet Status...

Media page
Media Wizard
●Create Media Type
●Delete Media Type
●View Media Types
●Set Sort Method
Media Settings
●General Media Settings
●Print Mode Specific Settings
Ink page
Maintenance
●Check Jet Health
●Perform An Air Purge
●Access Carriage
●Print Recover Jets Pattern
●Printhead Procedures
◦Load Ink In All Heads
◦Fill Heads with Ink
◦Empty Heads (Fill with Air)
●Ink Filter Counts
●Purge Type
●Low Ink Warning
●Set Auto Purge & Wipe Interval
●Upgrade Printer for White Ink Use (if printer has not been...

◦Clean Print Head Orifice Plates
◦Clean/Lube Service Station Rails
◦Clean Service Station Wiper
◦Clean Carriage Wheels
◦Vacuum Bottom of Carriage
◦Clean Carriage Home Sensor
◦Replace UV Lamp Filters
◦Clean Electronics Box Filters
◦Replace Service Station Wiper
◦Drain Waste from Service Station
◦Clean Media Thickness Sensor Roller
●User Diagnostics
◦Carriage Motion
◦Rail Motion
◦Calibration
◦Verify H2H Y Alignment
◦Print Quality
◦Service Station
◦Vacuum Pressure
◦Hard Drive
◦LVDS
◦Printhead Jet...

●UV Lamps Idle Time
●Attention Sorting
●Auto Maintenance Time
●Expert/Novice Messages
●Printer Name
●Network
●Restore All Defaults
ENWWMenu tree 43
 

44 Chapter 6   Use the control panel ENWW