HP Photosmart D5463 User Manual

Related topics
•“
Recommended papers for printing” on page 15
•“
Change the print settings for the current job” on page 32
Load up to 13 x 18 cm (5 x 7 inch) photo paper
You can load up to 13 x 18 cm (5 x 7 inch) photo paper into the photo tray of the
HP Photosmart. For the best results, use HP Advanced Photo Paper.
To load up to 13 x 18 cm (5 x  7 inch) photo paper in the photo tray
1. Raise the photo tray lid to load photo paper in the photo tray.
2.Slide the paper-width guide to its outermost...

4.Slide the paper-width guide inward until it stops at the edge of the paper.
Do not overload the photo tray; make sure the stack of photo paper fits within the
photo tray and is no higher than the top of the paper-width guide.
5.Lower the photo tray lid.
Related topics
•“
Recommended papers for printing” on page 15
•“
Print photos” on page 52
•“
Print a borderless image” on page 38
•“
Print a photo on photo paper” on page 39
Load postcards, Hagaki, or index cards
You can load postcards, Hagaki, and...

2.Slide the paper-width guide to its outermost position.
3.Insert the stack of cards into the photo tray with the short edge forward and the print
side down. Slide the stack forward until it stops.
4.Slide the paper-width guide inward until it stops at the edge of the paper.
Do not overload the photo tray; make sure the stack of cards fits within the photo tray
and is no higher than the top of the paper-width guide.
5.Lower the photo tray lid.
Related topics
“
Change the print settings for the current...

Load envelopes
You can load one or more envelopes into the main input tray of the HP Photosmart. Do
not use shiny or embossed envelopes or envelopes that have clasps or windows.
NOTE:For specific details on how to format text for printing on envelopes, consult
the help files in your word processing software. For best results, consider using a label
for the return address on envelopes.
To load envelopes
1. Raise the output tray to load envelopes in the main input tray.
2.Remove all paper from the main...

4.Insert one or more envelope s into the far-right side of the main input tray, with the
envelope flaps on the left and facing up. Slide the stack of envelopes forward until it
stops.
5. Slide the paper-width guide inward against the stack of envelopes until it stops.
Do not overload the main input tray; make sure the stack of envelopes fits within the
main input tray and is not higher than the top of the paper-width guide.
6.Lower the output tray. Pull the tray exte nder towards you, as far as it will...

HP Premium Inkjet Transparency Film
▲Insert the film so that the white transparency strip (with arrows and the HP logo) is on
top and is going into the input tray first.
NOTE: The HP Photosmart cannot automatically detect the paper type. For best
results, set the paper type to transparency film in the software before printing onto
transparency film.
HP Iron-on Transfers
1. Flatten the transfer sheet completely before using it; do not load curled sheets.
TIP: To prevent curling, keep transfer sheets...

To load a regular-size (120 mm) CD/DVD on the CD/DVD tray
1.Carefully remove the CD/DVD holder that came with the product.
The CD/DVD holder is stored below the main input tray.
2.Securely snap the inkjet printable media onto the CD/DVD holder with the printable
side up. The CD/DVD should be placed on the ring at the end of the holder with the
arrows.
3.Lower the CD/DVD tray.
The CD/DVD tray is located just below the control panel. When in its lowered position,
the CD/DVD tray sits on top of the output...

4.Push the CD/DVD holder into the product until the lines on the CD/DVD holder line
up to the white lines on the CD/DVD tray.
NOTE: The product pulls the CD/DVD holder while printing on the media. The
CD/DVD holder might protrude about 7.5 cm (3 inches) at the back of the product.
If the product is placed close to a wall,  move it at least 3 inches away from the
wall.
5. After printing, make sure you insert the CD/DVD holder back into the storage area.
To load a small-size (80 mm) CD/DVD on the CD/DVD...

2.Securely snap the inkjet printable media onto the CD/DVD holder with the printable
side up. The CD/DVD should be placed on the ring at the end of the holder with the
arrows.
3.Flip the CD/DVD holder ring over the CD/DVD.
4.Lower the CD/DVD tray.
The CD/DVD tray is located just below the control panel. When in its lowered position,
the CD/DVD tray sits on top of the output tray.
Chapter 6
28 Load paper
Load paper
 

5.Push the CD/DVD holder into the product until the lines on the CD/DVD holder line
up to the white lines on the CD/DVD tray.
NOTE: The product pulls the CD/DVD holder while printing on the media. The
CD/DVD holder might protrude about 7.5 cm (3 inches) at the back of the product.
If the product is placed close to a wall, move it at least 7.5 cm (3 inches) away
from the wall.
6. After printing, make sure you insert the CD/DVD holder back into the storage area.
NOTE: Refer to the software that came with...