HP Photosmart D5363 User Manual

							
5.Press the  Print Photos  button.
TIP:While the photo is printing, you can continue scrolling through the photos
on your memory card. When you see a photo you want to print, you can press the
Print Photos  button to add that photo to the print queue.
6.If you increased the number of copies or selected additional photos to print, do one
of the following in the  Select Format screen:
• Press the  OK button to accept the default of  1-Up.
The photos will be printed on separate pages.
• Press the 
 button to highlight  3-Up, and then press the  OK button.
The photos will be printed on the same page (up to 3 per page).
Save photos to your computer
You can use the HP Photosmart Software installed on your computer to transfer photos
from a memory card to your computer’s hard drive for advanced photo editing, sharing
photos online, printing from your computer,  and creating special projects such as printing
a photo directly onto an HP Photosmart CD or DVD.
Before transferring photos to your computer, you need to remove the memory card from
your digital camera and insert it in the appropriate memory card slot on the
HP Photosmart.
NOTE: The HP Photosmart must be connected to a computer that has the
HP Photosmart Software installed on it.
To save photos
1. Insert a memory card into the appropriate slot on the HP Photosmart.
The software opens on your computer.
2. Click  Save, and then follow the onscreen prompts on your computer to save the
photos to your computer.
Only images that were not previously saved are copied to your computer.
Edit photos
The HP Photosmart automatically enhances your photos (brightening and sharpening
them), before you print them. You can also manually remove red eye from your photos.
Additional editing features are available using the software that you installed with the
HP Photosmart.
This section contains the following topics:
•
Remove red-eye
•
Edit photos using your computer
Chapter 8
50 Use the photo features
Photos
 
						

							
Remove red-eye
The flash on a camera (especially on older model cameras) can sometimes cause a
subjects eyes to appear red in your photos. You can remove redness so that eyes appear
the correct shade in your photos.
NOTE: The changes you make to the photo apply only to viewing and printing the
photo. The changes will not be saved on the memory card.
To remove red-eye from photos
1. Insert your memory card into the appropriate slot on the HP Photosmart.
The most recent image on the card appears on the display.
2.Press the  or  buttons to scroll through your photos until the photo you want to
print appears.
3. Press the  OK button to select the photo you want to edit.
4. Press  Red-Eye Removal  on the control panel.
Edit photos using your computer
You can use the HP Photosmart Software installed on your computer to transfer photos
from a memory card to your computer’s hard drive for advanced photo editing, sharing
photos online, printing from your computer, an d creating special projects such as printing
a photo directly onto an HP Photosmart CD or DVD.
Before transferring photos to your computer, you need to remove the memory card from
your digital camera and insert it in the appropriate memory card slot on the
HP Photosmart.
NOTE: The HP Photosmart must be connected to a computer that has the
HP Photosmart Software installed on it.
To edit photos
1. Insert a memory card into the appropriate slot on the HP Photosmart.
The software opens on your computer.
2. Click  View, and then follow the onscreen prompts to transfer your photos to the
computer for viewing and editing.
Share photos using HP Photosmart Software
You can use the HP Photosmart Software installed on your computer to transfer photos
from a memory card to your computer’s hard drive for advanced photo editing, sharing
photos online, printing from your computer, an d creating special projects such as printing
a photo directly onto an HP Photosmart CD or DVD.
Share photos using HP Photosmart Software 51
Photos
 
						

							
Before transferring photos to your computer, you need to remove the memory card from
your digital camera and insert it in the appropriate memory card slot on the
HP Photosmart.
NOTE:The HP Photosmart must be connected to a computer that has the
HP Photosmart Software installed on it.
To share photos
1. Insert a memory card into the appropriate slot on the HP Photosmart.
The software opens on your computer.
2. Click  Share , and then follow the onscreen prompts to transfer your photos to the
computer for sharing with friends and relatives.
HP Photosmart Share lets you share photos  with friends and family by sending photos
as e-mail, uploading photos to an online photo album, or ordering prints through an
online photo-finishing service.
Chapter 8
52 Use the photo features
Photos
 
						

							
9 Maintain the HP Photosmart
The HP Photosmart requires little maintenance. You might need to replace, align, or clean
your print cartridges from time to time ensure that your printouts are always of the highest
quality. This section provides instructions for keeping the HP Photosmart in top working
condition. Perform these simple maintenance procedures as necessary.
This section contains the following topics:
•
Work with print cartridges
•
Clean the HP Photosmart
•
Reduce energy consumption when the HP Photosmart is off
•
Turn off the HP Photosmart
Work with print cartridges
To ensure the best print quality from the HP Photosmart, you will need to perform some
simple maintenance procedures and, when  prompted by a message on the display,
replace the print cartridges.
This section contains the following topics:
•
Handle the print cartridges
•
Replace the print cartridges
•
Print a self-test report
•
Check the estimated ink levels
•
Use a photo print cartridge
•
Use the print cartridge protector
•
Align the print cartridges
•
Clean the print cartridges
•
Clean the print cartridge contacts
•
Clean the area around the ink nozzles
•
Remove ink from your skin and clothing
Maintain the HP Photosmart 53
Maintain the HP Photosmart
 
						

							
Handle the print cartridges
Before you replace or clean a print cartridge, you should know the part names and how
to handle the print cartridges.
1Copper-colored contacts
2Plastic tape with pink pull tab (must be removed before installing)
3Ink nozzles under tape
Hold the print cartridges by their black plastic sides, with the label on top. Do not touch
the copper-colored contacts or the ink nozzles.
NOTE:Handle the print cartridges carefully. Dropping or jarring cartridges can cause
temporary printing problems, or even permanent damage.
Replace the print cartridges
Follow these instructions when you need to replace print cartridges.
NOTE: When the ink level for the print cartridge is low, a message appears on the
display. You can also check the ink levels by using the  Printer Toolbox available
through the HP Photosmart Software on your computer or through the  Print
Properties  dialog box on your computer.
If you do not already have replacement print cartridges for the HP Photosmart, go to
www.hp.com/buy/supplies . If prompted, choose your country/region, follow the prompts
to select your product, and then click one of the shopping links on the page.
NOTE: At this time, some portions of the HP Web site are available in English only.
Chapter 9
54 Maintain the HP Photosmart
Maintain the HP Photosmart
 
						

							
Choose the right cartridge combination
Choose the best combination of cartridges for your print job:
•Everyday printing: Use a black cartridge along with a tri-color cartridge.
• Color photos: Use a photo cartridge along with a tri-color cartridge.
• Black-and-white photos: Use a gray photo cartridge along with a tri-color cartridge.
To replace the print cartridges
1.Make sure the HP Photosmart is on.
CAUTION: If the HP Photosmart is off when you open the print cartridge door to
access the print cartridges, the HP Photosmart will not release the cartridges for
changing. You might damage the HP Photosmart if the print cartridges are not
docked safely when you  try to remove them.
2.Open the print cartridge door.
The print carriage moves to the far right side of the HP Photosmart.
3.Wait until the print carriage is idle and silent, and then lightly press down on a print
cartridge to release it.
If you are replacing the tri-color print cartridge, remove the print cartridge from the
slot on the left.
Work with print cartridges 55
Maintain the HP Photosmart
 
						

							
If you are replacing the black, photo, or gray photo print cartridge, remove the print
cartridge from the slot on the right.
1Print cartridge slot for the tri-color print cartridge
2Print cartridge slot for the black and photo print cartridges
4.Pull the print cartridge toward you out of its slot.
5. If you are removing the black print cartridge in order to install the photo or gray photo
print cartridge, store the black print cartridge in the print cartridge protector or an
airtight plastic container.
6. Remove the new print cartridge from its packaging and, being careful to touch only
the black plastic, gently remove the plastic tape by using the pink pull tab.
1Copper-colored contacts
2Plastic tape with pink pull tab (must be removed before installing)
3Ink nozzles under tape
CAUTION: Do not touch the copper-colored contacts or ink nozzles. Also, do
not re-tape the print cartridges. Doing so can result in clogs, ink failure, and bad
electrical connections.
Chapter 9
56 Maintain the HP Photosmart
Maintain the HP Photosmart
 
						

							
7.Hold the print cartridge with the HP logo on top, and insert the new print cartridge into
the empty cartridge slo t. Make sure you push the print cartridge in firmly until it snaps
into place.
If you are installing the tri-color print cartridge, slide it into the left slot.
If you are installing a black, photo, or gray photo print cartridge, slide it into the right
slot.
8. Close the print cartridge door.
If you installed a new print cartridge, the HP Photosmart prints a print cartridge
alignment page.
9. When prompted, ensure plain white paper is loaded in the input tray, then press
OK.
Work with print cartridges 57
Maintain the HP Photosmart
 
						

							
10.The HP Photosmart prints a test page, aligns the print head, and calibrates the printer.
Recycle or discard the page.
A success or failure  message appears.
NOTE:If you have colored paper loaded in the input tray when you align the
printer, the alignment will fail. Load unused plain white paper into the input tray,
and then try the alignment again.
11. Press  OK to continue.
Related topics
“
Shop for ink supplies” on page 67
Print a self-test report
If you are experiencing problems with printi ng, print a self-test report before you replace
the print cartridges. This report provides useful information on several aspects of your
device, including yo ur print cartridges.
To print a self-test report
1. Load letter or A4 unused plain white paper into the input tray.
2. Press and hold the  Cancel button and then press the  Red-Eye Removal button.
The HP Photosmart prints a self-test report , which might indicate the source of the
printing problem. A sample of the ink test area of the report is shown below.
3. Make sure the test patterns show a complete grid and the thick color lines are
complete.
• If more than a few lines in a pattern are broken, this might indicate a problem with
the nozzles. You might need to clean the print cartridges.
• If the black line is missing, faded, streaked, or shows lines, this might indicate a problem with the black or photo print cartridge in the right slot.
• If any of the color lines are missing, faded, streaked, or show lines, this might indicate a problem with the tri-color print cartridge in the left slot.
Chapter 9
58 Maintain the HP Photosmart
Maintain the HP Photosmart
 
						

							
Related topics
•“
Clean the print cartridges” on page 62
•“
Replace the print cartridges” on page 54
•“
Align the print cartridges” on page 61
Check the estimated ink levels
You can easily check the ink supply level to determine how soon you might need to
replace a print cartridge. The ink supply level shows an estimate of the amount of ink
remaining in the print cartridges.
TIP: You can also print a self-test report to see if your print cartridges might need to
be replaced.
NOTE: The HP Photosmart can only detect the ink levels for genuine HP ink. The
ink levels in print cartridges that are refilled or have been used in other devices, might
not register accurately.
NOTE: Ink from the cartridges is used in the printing process in a number of different
ways, including in the initialization process, which prepares the device and cartridges
for printing, and in printhead servicing, which keeps print nozzles clear and ink flowing
smoothly. In addition, some residual ink is left in the cartridge after it is used. For more
information, see 
www.hp.com/go/inkusage .
To check the ink levels from the HP Photosmart Software
1.In the HP Solution Center, click  Settings, point to  Print Settings , and then click
Printer Toolbox .
NOTE:You can also open the  Printer Toolbox from the Print Properties  dialog
box. In the  Print Properties  dialog box, click the  Services tab, and then click
Service this device .
The Printer Toolbox  appears.
2. Click the  Estimated Ink Level  tab.
The estimated ink levels for the print cartridges appear.
Related topics
“
Print a self-test report” on page 58
Use a photo print cartridge
You can optimize the quality of the color photos you print with the HP Photosmart by
purchasing a photo print cartridge. Remove the black print cartridge and insert the photo
print cartridge in its place. With the tri-color print cartridge and photo print cartridge
installed, yo u have a six-ink system, which prov ides enhanced quality color photos.
When you want to print regular text documents, swap the black print cartridge back in.
Use a print cartridge protector or an airtight  plastic container to keep your print cartridge
secure when it is not being used.
Work with print cartridges 59
Maintain the HP Photosmart