HP Pavilion Touchsmart 15 N000 Notebook Pc Series Manual

							Inserting and removing a memory card
To insert a memory card:
CAUTION:To reduce the risk of damage to the memory card connectors, use minimal force to
insert a memory card.
1.Hold the card label-side up, with the connectors facing the computer.
2.Insert the card into the memory card reader, and then press in on the card until it is firmly
seated.
A sound indicates that the device has been detected.
To remove a memory card:
CAUTION:To reduce the risk of loss of data or an unresponsive system, use the following
procedure to safely remove the memory card.
1.Save your information and close all programs associated with the memory card.
2.From the Windows desktop, click the remove hardware icon in the notification area, at the far
right of the taskbar, and then, follow the on-screen instructions.
3.Press in on the card (1), and then remove it from the slot (2).
NOTE:If the card is not ejected, pull the card out of the slot.
Inserting and removing a memory card 51 
						

							Using optical drives
An optical disc drive uses laser light to read or store large amounts of information. Some drives can
only read information, but others can also write (burn) information onto a blank disc.
Use these tips for best performance of your optical drive:
●When the battery is the only source of power, be sure that the battery is sufficiently charged
before writing to media.
●Do not type on the keyboard or move the computer while an optical drive is writing to a disc. The
write process is sensitive to vibration.
●Be sure that you have installed the latest software updates for the drive.
●If the disc you are using is not clean, wipe it with a dry, lint-free, soft cloth.
Your computer may include an optical drive that supports one or more of the following disc
technologies:
●CD—A compact disc stores data that is read by a laser from the optical disc drive. The following
CD formats are available:
◦CD-Recordable (CD-R), which allows the computer to read information and to record
information one time on the CD. Once the information is recorded on the CD-R disc, it
cannot be changed or erased; it is permanent.
◦CD-ReWritable (CD-RW), which allows you to read information and record information
many times to the CD. Information on the CD can be erased.
●DVD—A digital video disc is a high-capacity optical disc. It can store more information than a
CD. A double-sided DVD can store up to 17 GB. The following DVD formats are available:
◦DVD-Recordable (DVD-R or DVD+R), which allows the computer to read information and to
record information one time on the DVD. After the information is recorded on the disc, it
cannot be changed or erased; it is permanent. The DVDs can be used in DVD±R drives.
◦DVD-ReWritable (DVD-RW or DVD+RW), which allows the computer to read information
and record information many times to the disc. Information on the disc can be erased. The
DVDs can be used in DVD±R drives.
●BD—a Blu-ray Disc holds more information than the other optical discs and they can be used to
record, rewrite, and play back high-definition (HD) video.
Note the following when using BDs:
●CyberLink PowerDVD is installed on the computer to play BD movies.
●Attempting to play a BD movie simultaneously on both the internal and an external display may
cause an error, so choose only one.
●For copy protection purposes, Advanced Access Content System (AACS) keys are integrated
into the computer. AACS keys require occasional renewal to support playback of new BD movie
releases. The CyberLink PowerDVD program will request an update to continue playback when
such a BD movie release is inserted in the drive. Follow the on-screen instructions to install the
update.
●If lines appear on the display when viewing a BD, they may be caused by interference from the
wireless network. To resolve the issue, close any open applications and turn off your wireless
feature.
52 Chapter 7   Managing and sharing information 
						

							Inserting an optical disc
Tray-load
1.Turn on the computer.
2.Press the release button (1) on the drive bezel to release the disc tray.
3.Pull out the tray (2).
4.Hold the disc by the edges to avoid touching the flat surfaces and position the disc label-side up
over the tray spindle.
NOTE:If the tray is not fully accessible, tilt the disc carefully to position it over the spindle.
5.Gently press the disc (3) down onto the tray spindle until the disc snaps into place.
6.Close the disc tray.
NOTE:After you insert a disc, a short pause is normal. If you have not selected a media player, an
AutoPlay dialog box opens. It prompts you to select how you want to use the media content.
Removing an optical disc
Tray-load
There are 2 ways to remove a disc, depending on whether the disc tray opens normally or not.
When the disc tray opens normally
1.Press the release button (1) on the drive bezel to release the disc tray, and then gently pull out
the tray (2) until it stops.
Using optical drives 53 
						

							2.Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer
edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces.
NOTE:If the tray is not fully accessible, tilt the disc carefully as you remove it.
3.Close the disc tray and place the disc in a protective case.
When the disc tray fails to open normally
1.Insert the end of a paper clip (1) into the release access in the front bezel of the drive.
2.Press in gently on the paper clip until the tray is released, and then pull out the tray (2) until it
stops.
54 Chapter 7   Managing and sharing information 
						

							3.Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer
edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces.
NOTE:If the tray is not fully accessible, tilt the disc carefully as you remove it.
4.Close the disc tray and place the disc in a protective case.
Sharing data and drives and accessing software
When your computer is part of a network, you are not limited to using only the information that is
stored in your computer. Network computers can exchange software and data with each other.
NOTE:When a disc like a DVD movie or game is copy-protected, it cannot be shared.
To share folders or libraries on the same network:
1.From the Windows desktop, open File Explorer.
2.Click the Share menu on the Libraries window, and then click Specific people.
3.Type a name in the File Sharing box, and then click Add.
4.Click Share and then follow the on-screen instructions.
To share information from your Local Disk:
1.From the Windows desktop, open File Explorer.
2.Click Local Disk (C:) on the Libraries window.
3.Click the Share tab, and then click Advanced sharing.
4.On the Local Disk (C:) Properties window, select Advanced Sharing.
5.Check Share this folder.
Using optical drives 55 
						

							To share drives on the same network:
1.From the Windows desktop, right-click the network status icon in the notification area, at the far
right of the taskbar.
2.Select Open Network and Sharing Center.
3.Under View your active networks, select an active network.
4.Select Change advanced sharing settings to set sharing options for privacy, network
discovery, file and printer sharing or other network options.
56 Chapter 7   Managing and sharing information 
						

							8 Maintaining your computer
It is important to perform regular maintenance to keep your computer in optimal condition. This
chapter provides information about improving the performance of your computer by running tools
such as Disk Defragmenter and Disk Cleanup. It also provides information about updating your
programs and drivers, instructions for cleaning your computer, and tips for traveling with your
computer.
Improving performance
Everyone wants a fast computer and by performing regular maintenance tasks, using tools such as
Disk Defragmenter and Disk Cleanup, you can drastically improve the performance of your computer.
Also, as your computer gets older, you might consider adding more memory.
Using HP 3D DriveGuard (select models only)
HP 3D DriveGuard protects a hard drive by parking the drive and halting data requests under either of
the following conditions:
●You drop the computer.
●You move the computer with the display closed while the computer is running on battery power.
A short time after the end of one of these events, HP 3D DriveGuard returns the hard drive to normal
operation.
NOTE:Because solid state drives (SSDs) lack moving parts, they do not require HP 3D DriveGuard
protection.
NOTE:Hard drives in the primary hard drive bay or in the secondary hard drive bay are protected
by HP 3D DriveGuard. Hard drives installed in optional docking devices or connected to USB ports
are not protected by HP 3D DriveGuard.
For more information, see the HP 3D DriveGuard software Help.
Using Disk Defragmenter
As you use your computer over time, the files on the hard drive become fragmented. A fragmented
drive means data on your drive is not contiguous (sequential) and, because of this, the hard drive
works harder to locate files, thus slowing down the computer. Disk Defragmenter consolidates (or
physically reorganizes) the fragmented files and folders on the hard drive so that the system can run
more efficiently.
NOTE:It is not necessary to run Disk Defragmenter on solid-state drives.
After you start Disk Defragmenter, it works without supervision. However, depending on the size of
your hard drive and the number of fragmented files, Disk Defragmenter may take more than an hour
to complete.
HP recommends defragmenting your hard drive at least once a month. You may set Disk
Defragmenter to run on a monthly schedule, but you can defragment your computer manually at any
time.
Improving performance 57 
						

							To run Disk Defragmenter:
1.Connect the computer to AC power.
2.From the Start screen, type d, and then type disk in the search box. Select Settings, and then
select Defragment and optimize your drives.
3.Follow the on-screen instructions.
For additional information, access the Disk Defragmenter software Help.
Using Disk Cleanup
Disk Cleanup searches the hard drive for unnecessary files that you can safely delete to free up disk
space and help the computer run more efficiently.
To run Disk Cleanup:
1.From the Start screen, type d, and then type disk in the search box. Select Settings, and then
select Free up disk space by deleting unnecessary files.
2.Follow the on-screen instructions.
Adding or replacing memory modules
Adding memory can help improve your computers performance. Your computer is like your physical
work area. The hard drive is the filing cabinet where you store your work and the memory is the desk
where you work. When your memory isn’t big enough to hold all your work easily, like a desk
overflowing with work, your productivity slows down. A great solution to improve performance is to
expand the amount of memory you have in your computer.
The computer has two memory module slots. The memory module slots are located on the bottom of
the computer under the service door. The memory capacity of the computer can be upgraded by
adding a memory module or replacing the existing memory module in one of the memory module
slots.
WARNING!To reduce the risk of electric shock and damage to the equipment, unplug the power
cord and remove all batteries before installing a memory module.
CAUTION:Electrostatic discharge (ESD) can damage electronic components. Before beginning
any procedure, ensure that you are discharged of static electricity by touching a grounded metal
object.
NOTE:If you are adding or replacing the memory module in your computer with a single memory
module, insert the memory module into the slot furthest from the system board.
NOTE:To use a dual-channel configuration with a second memory module, be sure that both
memory modules are identical.
To add or replace a memory module:
CAUTION:To prevent information loss or an unresponsive system:
Shut down the computer before adding or replacing memory modules. Do not remove a memory
module while the computer is on, in the Sleep state, on in Hibernation.
If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the
power button. Then shut down the computer through the operating system.
1.Save your work and shut down the computer.
2.Disconnect all external devices connected to the computer.
58 Chapter 8   Maintaining your computer 
						

							3.Unplug the power cord from the AC outlet.
4.Turn the computer upside down on a flat surface.
5.Remove the battery from the computer (see 
Removing a user-replaceable battery on page 42).
6.Remove the service door from the computer.
7.If you are replacing a memory module, remove the existing memory module:
a.Pull away the retention clips (1) on each side of the memory module.
The memory module tilts up.
b.Grasp the edge of the memory module (2), and then gently pull the module out of the
memory module slot.
CAUTION:To prevent damage to the memory module, hold the memory module by the
edges only. Do not touch the components on the memory module.
NOTE:To protect a memory module after removal, place it in an electrostatic-safe
container.
8.Insert a new memory module:
CAUTION:To prevent damage to the memory module, hold the memory module by the edges
only. Do not touch the components on the memory module.
a.Align the notched edge (1) of the memory module with the tab in the memory module slot.
b.With the memory module at a 45-degree angle from the surface of the memory module
compartment, press the module into the memory module slot (2) until it is seated.
c.Gently press the memory module (3) down, applying pressure to both the left and right
edges of the module, until the retention clips snap into place.
CAUTION:To prevent damage to the memory module, be sure that you do not bend the
module.
Improving performance 59 
						

							9.Replace the service door.
10.Replace the battery.
11.Turn the computer right-side up, and then reconnect external power and external devices.
12.Turn on the computer.
Updating programs and drivers
HP recommends that you update your programs and drivers on a regular basis to the latest versions.
Updates can resolve issues and bring new features and options to your computer. Technology is
always changing, and updating programs and drivers allows your computer to run the latest
technology available. For example, older graphics components might not work well with the most
recent gaming software. Without the latest driver, you would not be getting the most out of your
equipment.
Go to 
http://www.hp.com/support to download the latest versions of HP programs and drivers. In
addition, register to receive automatic update notifications when they become available.
Cleaning your computer
Use the following products to safely clean your computer:
●Dimethyl benzyl ammonium chloride 0.3 percent maximum concentration (For example:
Disposable wipes, which come in a variety of brand names.)
●Alcohol-free glass cleaning fluid
●Water with mild soap solution
60 Chapter 8   Maintaining your computer