HP Pavilion M6 1000 Entertainment Notebook Pc Series User Guide

							Connecting to a WLAN
To connect to the WLAN, follow these steps:
1.Be sure that the WLAN device is on. If the device is on, the wireless light is on. If the wireless
light is off, press the wireless button.
NOTE:On some models, the wireless light is amber when all wireless devices are off.
2.Click the network status icon in the notification area, at the far right of the taskbar.
3.Select your WLAN from the list.
4.Click Connect.
If the WLAN is a security-enabled WLAN, you are prompted to enter a security code. Type the
code, and then click OK to complete the connection.
NOTE:If no WLANs are listed, you may be out of range of a wireless router or access point.
NOTE:If you do not see the WLAN you want to connect to, click Open Network and Sharing
Center, and then click Set up a new connection or network. A list of options is displayed,
allowing you to manually search for and connect to a network or to create a new network
connection.
After the connection is made, place the mouse pointer over the network status icon in the notification
area, at the far right of the taskbar, to verify the name and status of the connection.
NOTE:The functional range (how far your wireless signals travel) depends on WLAN
implementation, router manufacturer, and interference from other electronic devices or structural
barriers such as walls and floors.
Using Bluetooth wireless devices
A Bluetooth device provides short-range wireless communications that replace the physical cable
connections that traditionally link electronic devices such as the following:
●Computers (desktop, notebook, PDA)
●Phones (cellular, cordless, smart phone)
●Imaging devices (printer, camera)
●Audio devices (headset, speakers)
●Mouse
Bluetooth devices provide peer-to-peer capability that allows you to set up a personal area network
(PAN) of Bluetooth devices. For information about configuring and using Bluetooth devices, see the
Bluetooth software Help.
Connecting to a wireless network 21 
						

							Connecting to a local area network (LAN)
Use a LAN connection if you want to connect the computer directly to a router in your home (instead
of working wirelessly), or if you want to connect to an existing network at your office.
Connecting to a LAN requires an 8-pin, RJ-45 network cable.
To connect the network cable, follow these steps:
1.Plug the network cable into the network jack (1) on the computer.
2.Plug the other end of the network cable into a network wall jack (2) or router.
NOTE:If the network cable contains noise suppression circuitry (3), which prevents
interference from TV and radio reception, orient the circuitry end of the cable toward the
computer.
22 Chapter 3   Connecting to a network 
						

							4 Enjoying entertainment features
Use your HP computer as an entertainment hub to socialize via the webcam, enjoy and manage your
music, and download and watch movies. Or, to make your computer an even more powerful
entertainment center, connect external devices like speakers, headphones, monitor, projector, TV,
and, on select models, high-definition devices.
Multimedia Features
Here are some of the entertainment features on your computer.
Component Description
(1)  Internal microphones (2) Record sound.
(2)  Webcam light On: The webcam is in use.
23 
						

							Component Description
(3)  HP TrueVision HD Webcam Records video, captures still photographs, allows
you to video conference and chat online using
streaming video.
To use the webcam, select Start > All Programs >
Communication and Chat > CyberLink YouCam.
(4)  Integrated subwoofer Provides superior bass sound.
(5)
USB 2.0 port Connects an optional USB device.
NOTE:For details about different types of USB
ports, see 
Using a USB device on page 49.
(6)
USB 3.0 ports (3) Connect optional USB 3.0 devices and provide
enhanced USB power performance.
(7)  Optical drive Reads and writes (select models only) to an optical
disc.
(8) b key Enables or disables Beats Audio when pressed in
combination with the fn key.
Beats Audio is an enhanced audio profile that
provides a deep, controlled bass while maintaining a
clear sound. Beats Audio is enabled by default.
You can view and control the bass settings through
the Windows operating system. To view and control
the bass properties:
Select Start > Control Panel > Hardware and
Sound > Beats Audio Control Panel.
(9) fn key Enables or disables Beats Audio when pressed in
combination with the b key.
(10)
Audio-out (headphone) jack/Audio-in
(microphone) jackProduces sound when connected to optional
powered stereo speakers, headphones, earbuds, a
headset, or television audio. Also connects an
optional headset microphone. The jack does not
support optional microphone-only devices.
WARNING!To reduce the risk of personal injury,
adjust the volume before putting on headphones,
earbuds, or a headset. For additional safety
information, refer to the Regulatory, Safety, and
Environmental Notices.
NOTE:When a device is connected to the jack,
the computer speakers are disabled.
(11)
HDMI port Connects an optional video or audio device, such as
a high-definition television, any compatible digital or
audio component, or a high-speed HDMI device.
(12)
External monitor port Connects an external VGA monitor or projector.
(13) Speakers (2) Produce sound.
24 Chapter 4   Enjoying entertainment features 
						

							Using the webcam
Your computer has an integrated webcam, a powerful social networking tool that allows you to
communicate up close with friends and colleagues next door or on the other side of the world. With
the webcam, you can stream video with your instant messaging software, capture and share video,
and take still photos.
To start the webcam, select Start > All Programs > Communication and Chat > CyberLink
YouCam.
For details about using the webcam, select Start > Help and Support.
Using audio
On your HP computer, you can play music CDs, download and listen to music, stream audio content
from the web (including radio), record audio, or mix audio and video to create multimedia. To
enhance your listening enjoyment, attach external audio devices such as speakers or headphones.
Connecting speakers
You can attach wired speakers to your computer by connecting them to USB ports (or the audio-out
jack) on your computer or on a docking station.
To connect wireless speakers to your computer, follow the device manufacturers instructions. To
connect high-definition speakers to the computer, see 
Configuring audio settings (with HDMI TV)
on page 28. Before connecting audio devices, be sure to adjust the volume.
Connecting headphones
You can connect wired headphones to the headphone jack on your computer.
To connect wireless headphones to your computer, follow the device manufacturers instructions.
WARNING!To reduce the risk of personal injury, adjust the volume before putting on headphones,
earbuds, or a headset. For additional safety information, see the Regulatory, Safety and
Environmental Notices.
Connecting a microphone
To record audio, connect a headset microphone to the audio-out (headphone) jack/audio-in
(microphone) jack on the computer. For best results when recording, speak directly into the headset
microphone and record sound in a setting free of background noise.
Using Beats Audio
Beats Audio is an enhanced audio feature that provides a deep, controlled bass while maintaining a
clear sound.
Accessing Beats Audio Control Panel
Beats Audio Control Panel allows you to view and manually control audio and bass settings.
To open Beats Audio Control Panel, select Start > Control Panel > Hardware and Sound > Beats
Audio Control Panel.
Using the webcam 25 
						

							Enabling and Disabling Beats Audio
▲To enable or disable Beats Audio, press the fn key in combination with the b key.
The following table explains the meaning of the Beats Audio icons that appear on the screen when
you press the Beats Audio hot key (fn+b).
Icon Definition
Beats Audio is enabled.
Beats Audio is disabled.
Checking the sound
To check the audio functions on your computer, follow these steps:
1.Select Start > Control Panel > Hardware and Sound > Sound.
2.When the Sound window opens, click the Sounds tab. Under Program Events, select any
sound event, such as a beep or alarm, and click the Test button.
You should hear sound through the speakers or through connected headphones.
To check the recording functions on your computer, follow these steps:
1.Select Start > All Programs > Accessories > Sound Recorder.
2.Click Start Recording and speak into the microphone. Save the file to your desktop.
3.Open a multimedia program and play the recording.
To confirm or change the audio settings on your computer, select Start > Control Panel > Hardware
and Sound > Sound.
Using video
Your HP computer is a powerful video device that enables you to watch streaming video from your
favorite websites and download video and movies to watch on your computer, without needing to
access a network.
To enhance your viewing enjoyment, use one of the video ports on the computer to connect an
external monitor, projector, or TV. Most computers have a video graphics array (VGA) port, which
connects analog video devices. Some computers also have a high-definition multimedia interface
(HDMI) port, which allows you to connect a high-definition monitor or TV.
IMPORTANT:Be sure that the external device is connected to the correct port on the computer,
using the correct cable. Check the device manufacturers instructions if you have questions.
26 Chapter 4   Enjoying entertainment features 
						

							Connecting a VGA monitor or projector
To see the computer screen image on an external VGA monitor or projected for a presentation,
connect a monitor or projector to the computers VGA port.
To connect a monitor or projector:
1.Connect the VGA cable from the monitor or projector to the VGA port on the computer as
shown.
2.Press f4 to alternate the screen image between 4 display states:
●Computer only: View the screen image on the computer only.
●Duplicate: View the screen image simultaneously on both the computer and external
device.
●Extend: View the screen image extended across both the computer and external device.
●External device only: View the screen image on the external device only.
Each time you press f4, the display state changes.
NOTE:Adjust the screen resolution of the external device, especially if you choose the
“Extend” option. Go to Start > Control Panel > Appearance and Personalization > Adjust
screen resolution for best results.
Connecting an HDMI TV or monitor
To see the computer screen image on a high-definition TV or monitor, connect the high-definition
device according to the following instructions.
To connect an HDMI device to your computer, you need an HDMI cable, sold separately.
Using video 27 
						

							To connect a high-definition TV or monitor to your computer:
1.Connect one end of the HDMI cable to the HDMI port on the computer.
2.Connect the other end of the cable to the high-definition TV or monitor.
3.Press f4 to alternate the computer screen image between 4 display states:
●Computer only: View the screen image on the computer only.
●Duplicate: View the screen image simultaneously on both the computer and external
device.
●Extend: View the screen image extended across both the computer and external device.
●External device only: View the screen image on the external device only.
Each time you press f4, the display state changes.
NOTE:Adjust the screen resolution of the external device, especially if you choose the
“Extend” option. Go to Start > Control Panel > Appearance and Personalization > Adjust
screen resolution for best results.
Configuring audio settings (with HDMI TV)
HDMI is the only video interface that supports high-definition video and audio. After you connect an
HDMI TV to the computer, you can then turn on HDMI audio by following these steps:
1.Right-click the Speaker icon in the notification area, at the far right of the taskbar, and then click
Playback devices.
2.On the Playback tab, click the name of the digital output device.
3.Click Set Default, and then click OK.
28 Chapter 4   Enjoying entertainment features 
						

							To return the audio stream to the computer speakers, follow these steps:
1.Right-click the Speakers icon in the notification area, at the far right of the taskbar, and then
click Playback devices.
2.On the Playback tab, click Speakers.
3.Click Set Default, and then click OK.
Using Intel Wireless Display and Wireless Music (select models only)
Intel® Wireless Display and Wireless Music allow you to transmit your computer content wirelessly to
your receive/display device, such as HDTV, monitor, projector, game console, Blu-ray player, or DVR,
by using an optional wireless adapter (purchased separately). For details about using the wireless
adapter, see the manufacturers instructions.
To open Intel Wireless Display, select Start > Intel WiDi.
NOTE:Before using the wireless display feature, be sure that your wireless device is turned on.
Managing your audio and video files
CyberLink PowerDVD helps you manage and edit your photo and video collections.
▲To start CyberLink PowerDVD, select Start > All Programs > Music, Photos and Videos, and
then click CyberLink PowerDVD.
For more information about using CyberLink PowerDVD, see the PowerDVD software Help.
Managing your audio and video files 29 
						

							5 Using the keyboard and pointing
devices
Your computer allows easy on-screen navigation with a keyboard, pointing device, and on select
models, an integrated numeric keypad. Select models also have action keys or hot key shortcuts that
enable you to do common tasks. The TouchPad enables you to perform on-screen functions similar
to those done by an external mouse.
To customize pointing device settings, such as button configuration, click speed, and pointer options,
select Start > Control Panel and type mouse in the search box in the upper-right corner of the
screen. Click Mouse to explore the pointing device features and to select preferred settings. Use an
external USB mouse (purchased separately) by connecting it to one of the USB ports on the
computer.
NOTE:On some models, the TouchPad is called “ClickPad” or “Imagepad.”
The keyboard allows you to type and the action keys and hot keys allow you to perform specific
functions. For more details about the keyboard keys, see 
Keys on page 13.
NOTE:Depending on the country or region, your keyboard may have different keys and keyboard
functions than those discussed in this section.
30 Chapter 5   Using the keyboard and pointing devices