HP Pavilion Dv9700 Entertainment Notebook Pc Series Service Guide

Where used: 4 screws that secure the top cover to the computer
Where used: 2 screws that secure the top cover to the computer
Where used:
(1) Two screws that secure the wireless switch board to the computer
Phillips PM2.5×5.0 screw 141 

(2) One screw that secures the audio board to the computer
Where used:
(1) One screw that secures the front USB board to the base enclosure
(2) Four screws that secure the ExpressCard assembly to the system board
Where used:
(1) One screw that secures the display switch module to the fan/heat sink assembly
(2) Two screws that secure the power connector cable bracket to the base enclosure
(3) One screw that secures the rear USB board to the base enclosure
(4) 3 screws that secure the system board to the...

Phillips PM2.5×6.0 screw
ColorQuantityLengthThreadHead width
Black 2 6.0 mm 2.5 mm 5.0 mm
Where used: 2 screws that secure the display panel to the display assembly
Phillips PM2.5×6.0 screw 143 

Phillips PM2.0×4.0 screw
ColorQuantityLengthThreadHead width
Black 4 4.0 mm 2.0 mm 4.5 mm
Where used: 4 screws that secure the wireless antenna transceivers to the display enclosure
144 Chapter 7   Screw listing 

Phillips 2.5×4.0 captive screw
ColorQuantityLengthThreadHead width
Silver 2 4.0 mm 2.5 mm 5.0 mm
Where used: 2 captive screws that secure the heat sink to the system board
Phillips 2.5×4.0 captive screw 145 

8 Backup and recovery
Recovering system information
Tools provided by the operating system and Recovery Manager software are designed to help you with
the following tasks for safeguarding your information and restoring it in case of a system failure:
●Backing up your information regularly to protect your important system files.
●Making a set of recovery discs (Recovery Manager software feature). Recovery discs are used to
start up (boot) your computer and restore the operating system and software...

●Number each disc before inserting it into the computer optical drive.
●If necessary, you can exit the program before you have finished creating the recovery discs. The
next time you open Recovery Manager, you will be prompted to continue the disc creation process.
To create a set of recovery discs:
1.Select Start > All Programs > Recovery Manager > Recovery Manager.
Recovery Manager opens.
2.Click Advanced Options.
NOTE:If you are operating the computer on battery power, you will be prompted to connect...

Using system restore points
When you back up your system, you are creating a system restore point. A system restore point allows
you to save and name a snapshot of your hard drive at a specific point in time. You can then recover
back to that point if you want to reverse subsequent changes made to your system. 
NOTE:Recovering to an earlier restore point does not affect data files saved or e-mails created since
the last restore point.
You also can create additional restore points to provide increased...

Performing a recovery
NOTE:You can only recover files that you have previously backed up. HP recommends that you use
Recovery Manager to create an entire drive backup as soon as you set up your computer.
Recovery Manager software allows you to repair or restore the system if you experience system failure
or instability. Recovery Manager works from recovery discs that you create or from a dedicated recovery
partition on the hard drive. 
NOTE:Windows has its own built-in repair features, such as System...

9 Connector pin assignments
Audio-out (headphone)
PinSignal
1Audio out, left channel
2Audio out, right channel
3 Ground
Audio-in (microphone)
PinSignal
1Audio signal in
2Audio signal in
3 Ground
150 Chapter 9   Connector pin assignments