HP Pavilion Dv9400 Entertainment Notebook Pc Series Service Guide
Have a look at the manual HP Pavilion Dv9400 Entertainment Notebook Pc Series Service Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1114 HP manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Removal and Replacement Procedures Maintenance and Service Guide 5–65 4. Remove the four silver Phillips PM2.5×5.0 screws 1 that secure the ExpressCard assembly to the system board. 5. Slide the ExpressCard assembly 2 to the right to disconnect it from the system board. 6. Remove the ExpressCard assembly 3. Removing the ExpressCard Assembly Reverse the above procedure to install the ExpressCard assembly.
5–66 Maintenance and Service Guide Removal and Replacement Procedures 5.21 Top Cover Support Trim 1. Prepare the computer for disassembly (Section 5.3) and remove the following components: ❏Hard drive (Section 5.4) ❏Optical drive (Section 5.9) ❏Switch cover (Section 5.10) ❏Keyboard (Section 5.11) ❏Speaker assembly (Section 5.12) ❏Display assembly (Section 5.14) ❏Top cover (Section 5.15) Top Cover Support Trim Spare Part Number Information Top cover support trim 432978-001
Removal and Replacement Procedures Maintenance and Service Guide 5–67 2. Turn the computer upside down with the front toward you. 3. Remove the four Phillips PM2.5×8.0 screws that secure the top cover support trim to the computer. Removing the Top Cover Support Trim Screws
5–68 Maintenance and Service Guide Removal and Replacement Procedures 4. Turn the computer right-side up with the front toward you. 5. Remove the Phillips PM2.5×8.0 screw 1 that secures the top cover support trim to the computer. 6. Remove the top cover support trim 2. Removing the Top Cover Support Trim Reverse the above procedure to install the top cover support trim.
Removal and Replacement Procedures Maintenance and Service Guide 5–69 5.22 Display Lid Switch Module 1. Prepare the computer for disassembly (Section 5.3) and remove the following components: ❏Hard drive (Section 5.4) ❏Optical drive (Section 5.9) ❏Switch cover (Section 5.10) ❏Keyboard (Section 5.11) ❏Speaker assembly (Section 5.12) ❏Display assembly (Section 5.14) ❏Top cover (Section 5.15) ❏Top cover support trim (Section 5.21) Display Lid Switch Module Spare Part Number Information Display lid switch module 432993-001
5–70 Maintenance and Service Guide Removal and Replacement Procedures 2. Remove the display lid switch module by firmly pulling it off the fan/heat sink assembly. ✎The display lid switch module is secured to the fan/heat sink assembly by 2-sided tape. Apply removal force to the middle of the module to remove it. Removing the Display Lid Switch Module ✎The display lid switch module cable is included with the display lid switch module spare part kit and is also included in the Cable Kit, spare part number 434677-001. Reverse the above procedure to install the display lid switch module.
Removal and Replacement Procedures Maintenance and Service Guide 5–71 5.23 Power Connector Assembly 1. Prepare the computer for disassembly (Section 5.3) and remove the following components: ❏Hard drive (Section 5.4) ❏Optical drive (Section 5.9) ❏Switch cover (Section 5.10) ❏Keyboard (Section 5.11) ❏Speaker assembly (Section 5.12) ❏Display assembly (Section 5.14) ❏Top cover (Section 5.15) Power Connector Assembly Spare Part Number Information Power connector assembly (includes power connector assembly cable and power connector assembly bracket)432985-001 USB board 432989-001
5–72 Maintenance and Service Guide Removal and Replacement Procedures 2. Remove the two silver Phillips PM2.5×5.0 screws 1 that secure the power connector assembly bracket to the computer. 3. Remove the power connector assembly bracket 2. Removing the Power Connector Assembly Bracket
Removal and Replacement Procedures Maintenance and Service Guide 5–73 4. Remove the silver Phillips PM2.5×5.0 screw 1 that secures the USB board to the computer. 5. Remove the USB board 2. 6. Disconnect the USB board cable 3 from the USB board and remove the cable from the clips 4 in the base enclosure. ✎The USB board cable is included with the USB board spare part kit and is also included in the Cable Kit, spare part number 434677-001. Removing the USB Board
5–74 Maintenance and Service Guide Removal and Replacement Procedures 7. Remove the black Phillips PM2.5×5.0 screw 1 that secures the power connector assembly to the computer. 8. Remove the power connector assembly 2 from its location in the base enclosure. Releasing the Power Connector Assembly Reverse the above procedure to install the USB board and power connector assembly.