HP Pavilion Dv8 1100 Entertainment Notebook Pc Series Manual

Screw listing
Maintenance and Service Guide7–13
Phillips PM2.5×6.0 captive screw
 
Where used:
1 Five captive screws that secure the mass storage device cover to the computer (screws are secured by C clips)
2 One captive screw that secures the WLAN module compartment cover to the computer (screw is secured by 
a C clip)
Color Quantity Length Thread Head diameter 
Black 6 6.0 mm 2.5 mm 5.0 mm 

7–14Maintenance and Service Guide
Screw listing
Phillips PM3.0×4.0 screw
 
Where used: 4 screws that secure the left and right brackets to the mass storage device
Color Quantity Length Thread Head diameter 
Silver 4 4.0 mm 3.0 mm 5.0 mm 

Screw listing
Maintenance and Service Guide7–15
Phillips PM2.5×5.0 broadhead screw
Where used: 3 screws that secure the subwoofer to the base enclosure
Color Quantity Length Thread Head diameter 
Silver 3 5.0 mm 2.5 mm 8.0 mm 

7–16Maintenance and Service Guide
Screw listing
Phillips PM2.0×11.0 captive screw
 
Where used: 4 captive screws that secure the fan/heat sink assembly to the system board (screws are secured by 
Orings)
Color Quantity Length Thread Head diameter 
Silver 4 11.0 mm 2.0 mm 5.0 mm 

Screw listing
Maintenance and Service Guide7–17
Phillips PM2.5×5.0 captive screw
 
Where used: 2 captive screws that secure the fan/heat sink assembly to the system board (screws are secured by 
Orings)
Color Quantity Length Thread Head diameter 
Silver 2 5.0 mm 2.5 mm 5.0 mm 

Maintenance and Service Guide8–1
8
Backup and recovery
Recovery after a system failure is as complete as your most current backup. HP recommends that you create 
recovery discs immediately after software setup. As you add new software and data files, you should continue to 
back up your system on a regular basis to maintain a reasonably current backup.
Tools provided by the operating system and HP Recovery Manager software are designed to help you with the 
following tasks for safeguarding your...

8–2Maintenance and Service Guide
Backup and recovery
■Number each disc before inserting it into the computer optical drive.
■If necessary, you can exit the program before you have finished creating the recovery discs. The next time you 
open Recovery Manager, you will be prompted to continue the disc creation process.
To create a set of recovery discs:
1. Select Start > All Programs > Recovery Manager > Recovery Disc Creation.
2. Follow the on-screen instructions.
Backing up your information
As you add...

Backup and recovery
Maintenance and Service Guide8–3
Using Windows Backup and Restore
To create a backup using Windows Backup and Restore, follow these steps:
✎Be sure that the computer is connected to AC power before you start the backup process.
✎The backup process may take over an hour, depending on the file size and the speed of the computer.
1. Select Start > All Programs > Maintenance > Backup and Restore.
2. Follow the on-screen instructions to set up and create a backup.
✎Windows includes the...

8–4Maintenance and Service Guide
Backup and recovery
4. Click System Restore.
5. Follow the on-screen instructions.
Per fo rm in g  a rec over y
✎You can recover only files that you have previously backed up. HP recommends that you use HP Recovery 
Manager to create a set of recovery discs (entire drive backup) as soon as you set up your computer.
Recovery Manager software allows you to repair or restore the system if you experience system failure or 
instability. Recovery Manager works from recovery...

Maintenance and Service Guide9–1
9
Connector pin assignments
1394
 
Pin Signal
1TPB-
2TPB+
3TPA-
4TPA+