HP Pavilion Dv7 1000 Entertainment Notebook Pc Series Manual
Have a look at the manual HP Pavilion Dv7 1000 Entertainment Notebook Pc Series Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1114 HP manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Keyboard For use in country or regionSpare part numberFor use in country or regionSpare part number For use with all computer models: Denmark, Norway, and Sweden 483275-DH1Saudi Arabia483275-171 France483275-051Spain483275-071 French Canada483275-121Switzerland483275-111 Germany483275-041Turkey483275-141 Italy483275-061The United Kingdom483275-031 The Netherlands483275-B31The United States483275-001 Portugal483275-131 For use only with computer models equipped with AMD processors: Asia Pacific countries and regions 483275-371Japan483275-291 Belgium483275-A41Latin America483275-161 Brazil483275-201The Netherlands483275-B31 The Czech Republic483275-221The Peoples Republic of China483275-AA1 Denmark, Norway, and Sweden483275-DH1Portugal483275-131 Europe, the Middle East, and Africa483275-021Russia483275-251 France483275-051Saudi Arabia483275-171 French Canada483275-121Spain483275-071 Germany483275-041Switzerland483275-111 Greece483275-151Thailand483275-281 Hong Kong483275-AC1Turkey483275-141 Italy483275-061The United Kingdom483275-031 Israel 483275-BB1 The United States 483275-001 Before removing the keyboard, follow these steps: 1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2.Disconnect all external devices connected to the computer. 3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4.Remove the battery (see Battery on page 54). 5.Remove the accessory cover (see Hard drive on page 59). 6.Remove the switch cover (see Switch cover on page 69). Component replacement procedures 71
Remove the keyboard: 1.Turn the computer upside down, with the front toward you. 2.Remove the Phillips PM2.5×13.0 screw that secures the keyboard to the computer. 3.Turn the computer display-side up, with the front toward you. 4.Open the computer as far as possible. 5.Remove the three Phillips PM2.0×4.0 screws (1) and the Phillips PM2.0×3.0 broad-head screw (2) that secure the keyboard to the computer. 6.Lift the rear edge of the keyboard (1) until it rests at an angle. 72 Chapter 4 Removal and replacement procedures
7.Slide the keyboard (2) back to disengage the tabs on the front edge of the keyboard from the top cover and rest it on the display. 8.Release the ZIF connector (1) to which the keyboard cable is attached and disconnect the keyboard cable (2). 9.Remove the keyboard. Reverse this procedure to install the keyboard. Component replacement procedures 73
Bluetooth module NOTE:The Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetooth module cable is included in the Cable Kit, spare part number 480474-001. DescriptionSpare part number Bluetooth module483113-001 Before removing the Bluetooth module, follow these steps: 1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2.Disconnect all external devices connected to the computer. 3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4.Remove the battery (see Battery on page 54). 5.Remove the switch cover (see Switch cover on page 69). 6.Remove the keyboard (see Keyboard on page 71) 7.Remove the following components: Remove the Bluetooth module: 1.Remove the two Phillips PM2.0×4.0 screws (1) that secure the Bluetooth module to the top cover. 2.Release the Bluetooth module (2) as far as the Bluetooth module cable allows. 3.Disconnect the Bluetooth module cable (3) from the Bluetooth module. 4.Remove the Bluetooth module. Reverse this procedure to install the Bluetooth module. 74 Chapter 4 Removal and replacement procedures
Speaker assembly DescriptionSpare part number Speaker assembly480470-001 Before removing the speaker assembly, follow these steps: 1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2.Disconnect all external devices connected to the computer. 3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4.Remove the battery (see Battery on page 54). 5.Remove the switch cover (see Switch cover on page 69). 6.Remove the keyboard (see Keyboard on page 71). Remove the speaker assembly: 1.Disconnect the speaker assembly cable (1) from the power button board. 2.Remove the three Phillips PM2.5×4.0 screws (2) that secure the speaker assembly to the computer. 3.Remove the speaker assembly (3). Reverse this procedure to install the speaker assembly. Component replacement procedures 75
Display assembly NOTE:All display assembly spare part include a webcam, microphone, and wireless antenna transceivers and cables. 17.0-inch WSXGA+ AntiGlare display assembly for use only with computer models equipped with AMD processors497104-001 17.0-inch WXGA AntiGlare display assembly for use only with computer models equipped with AMD processors497103-001 17.0-inch WSXGA+ BrightView display assembly with webcam and 2 microphones for use only with computer models equipped with AMD processors488881-001 17.0-inch WXGA BrightView display assembly with webcam and 2 microphones for use only with computer models equipped with AMD processors488880-001 17.0-inch WSXGA+ AntiGlare display assembly with webcam and 2 microphones for use only with computer models equipped with Intel processors480378-001 17.0-inch WXGA AntiGlare display assembly with webcam and 2 microphones for use only with computer models equipped with Intel processors480377-001 17.0-inch WSXGA+ BrightView display assembly with webcam and 2 microphones for use only with computer models equipped with Intel processors480376-001 17.0-inch WXGA BrightView display assembly with webcam and 2 microphones for use only with computer models equipped with Intel processors480375-001 Before removing the display assembly, follow these steps: 1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2.Disconnect all external devices connected to the computer. 3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4.Remove the battery (see Battery on page 54). 5.Remove the memory/WLAN module compartment cover (see Memory module on page 67). 6.Disconnect the wireless antenna cables from the WLAN module (see WLAN module on page 64). 7.Remove the following components: a.Switch cover (see Switch cover on page 69) b.Keyboard (see Keyboard on page 71) c.Speaker assembly (see Speaker assembly on page 75) Remove the display assembly: 1.Disconnect the display panel cable (1) from the system board. 76 Chapter 4 Removal and replacement procedures
2.Remove the wireless antenna cables (2) from the routing channels in the top cover. CAUTION:The display assembly will be unsupported when the following screws are removed. To prevent damage to the display assembly, support it before removing the screws. 3.Remove the three Phillips PM2.5×13.0 screws (1) and the three Phillips PM2.5×6.0 screws (2) that secure the display assembly to the computer. 4.Remove the display assembly (3). NOTE:Steps 5 through 24 provide display assembly internal component removal information for computer models equipped with AntiGlare display assemblies. See steps 25 through 40 for display assembly internal component removal information for computer models equipped with BrightView display assemblies. NOTE:See Webcam/microphone module on page 56 for webcam/microphone module replacement instructions for computer models equipped with BrightView display assemblies. 5.If it is necessary to replace the display enclosure or any of the display assembly internal components, remove the two rubber screw covers (1) on the display bezel lower edge. The rubber screw covers are available in the Display Rubber Kit, spare part number 495896-001. Component replacement procedures 77
6.Remove the two Phillips PM2.5×5.0 screws (2) that secure the display enclosure to the display assembly. 7.Turn the display enclosure upside down, with the hinges toward you. 8.Release the display enclosure (1) by sliding it toward the top of the display assembly until it detaches from the display assembly. 9.Lift the bottom edge of the display enclosure (2) until the display enclosure logo LED cable is accessible. 10.Disconnect the display enclosure logo LED cable (3) from the display panel cable. 11.Remove the display enclosure. The display enclosure is available using spare part number 480445-001. 12.If it is necessary to replace the webcam/microphone module, remove the two Phillips PM2.5×3.0 screws (1) that secure the webcam/microphone module to the display bezel. 13.Release the webcam/microphone module (2) as far from the display bezel as the webcam/ microphone module cable allows. 78 Chapter 4 Removal and replacement procedures
14.Disconnect the webcam/microphone module cable (3) from the webcam/microphone module. 15.Remove the webcam/microphone module. The webcam/microphone module is available using spare part number 480446-001. 16.If it is necessary to replace the display inverter, remove the 7 Phillips PM2.5×5.0 screws (1) that secure the display inverter cover to the display bezel. 17.Remove the display inverter cover (2) by lifting it straight up. The display inverter cover is available using spare part number 485606-001. 18.Remove the Phillips PM2.5×5.0 screw (1) that secures the display inverter to the display bezel. 19.Release the inverter (2) as far from the display bezel as the display panel cable and backlight cables allow. Component replacement procedures 79
20.Disconnect the display panel cable (3) and the backlight cable (4) from the display inverter. 21.Remove the display inverter. The display inverter is available using spare part number 480447-001. 22.If it is necessary to replace the display hinges, remove the two Phillips PM2.5×5.0 screws (1) and the four Phillips PM2.5×4.0 screws (2) that secure the display hinges to the display panel. 23.Remove the eight Phillips PM2.0×4.0 screws (1) that secure the display hinges to the display panel. 80 Chapter 4 Removal and replacement procedures