HP Pavilion Dv6100 Entertainment Notebook Pc Series Service Guide

Maintenance and Service Guide E–1
E
Connector Pin Assignments
Ta b l e  D - 1
Universal Serial Bus
Pin Signal Pin Signal
1 +5 VDC 3 Data +
2 Data – 4 Ground 

E–2 Maintenance and Service Guide
Connector Pin Assignments
Ta b l e  D - 2
RJ-45 (Network)
Pin Signal Pin Signal
1 Transmit + 5 Unused
2 Transmit – 6 Receive –
3 Receive + 7 Unused
4 Unused 8 Unused 

Connector Pin Assignments
Maintenance and Service Guide E–3
Ta b l e  D - 3
S-Video-Out
Pin Signal Pin Signal
1 TV-Ground 5 TV-CD
2 TV-CVBS 6 TV-Ground
3 TV-Ground 7 TV-YD
4 TV-Ground 

E–4 Maintenance and Service Guide
Connector Pin Assignments
Ta b l e  D - 4
External Monitor
Pin Signal Pin Signal
1 Red analog 9 +5 VDC
2 Green analog 10 Ground
3 Blue analog 11 Monitor detect
4 Not connected 12 DDC 2B data
5 Ground 13 Horizontal sync
6 Ground analog 14 Vertical sync
7 Ground analog 15 DDC 2B clock
8 Ground analog 

Connector Pin Assignments
Maintenance and Service Guide E–5
Ta b l e  D - 5
RJ-11 (Modem)
Pin Signal Pin Signal
1 Unused 4 Unused
2Tip 5Unused
3 Ring 6 Unused 

E–6 Maintenance and Service Guide
Connector Pin Assignments
Ta b l e  D - 6
Audio-In (Microphone)
Pin Signal Pin Signal
1 Audio signal in 3 Ground
2 Audio signal in
Ta b l e  D - 7
Audio-Out (Headphone)
Pin Signal Pin Signal
1 Audio out, left channel 3 Ground
2 Audio out, right channel 

Maintenance and Service Guide F–1
F
Power Cord Set Requirements
3-Conductor Power Cord Set
The wide range input feature of the computer permits it to operate 
from any line voltage from 100 to 120 or 220 to 240 volts AC.
The power cord set included with the computer meets the 
requirements for use in the country or region where the 
equipment is purchased.
Power cord sets for use in other countries and regions must meet 
the requirements of the country or region where the computer is 
used. 

F–2 Maintenance and Service Guide
Power Cord Set Requirements
General Requirements
The requirements listed below are applicable to all countries and 
regions.
■The length of the power cord set must be at least 1.5 m 
(5.0 ft) and a maximum of 2.0 m (6.5 ft).
■All power cord sets must be approved by an acceptable 
accredited agency responsible for evaluation in the country or 
region where the power cord set will be used.
■The power cord sets must have a minimum current capacity 
of 10 amps and a nominal...

Power Cord Set Requirements
Maintenance and Service Guide F–3
Country/Region-Specific Requirements
3-Conductor Power Cord Set Requirements
Country/Region Accredited Agency Applicable Note Number
Australia EANSW 1
Austria OVE 1
Belgium CEBC 1
Canada CSA 2
Denmark DEMKO 1
Finland FIMKO 1
France UTE 1
Germany VDE 1
Italy IMQ 1
Japan METI 3
✎NOTES:
1. The flexible cord must be  Type HO5VV-F, 3-conductor, 1.0 mm²
 
conductor size. Power cord set fittings (appliance coupler and wall plug) 
must bear the...

F–4 Maintenance and Service Guide
Power Cord Set Requirements
Korea EK 4
The Netherlands KEMA 1
Norway NEMKO 1
People’s Republic 
of ChinaCCC 5
Sweden SEMKO 1
Switzerland SEV 1
Taiwan BSMI 4
United Kingdom BSI 1
United States UL 2
✎NOTES:
1. The flexible cord must be  Type HO5VV-F, 3-conductor, 1.0 mm²
 
conductor size. Power cord set fittings (appliance coupler and wall plug) 
must bear the certification mark of the agency responsible for evaluation 
in the country or region where it will be used.
2....