HP Pavilion Dv6 1000 Entertainment Notebook Pc Series Manual

CAUTION:Loosen the screws in the order indicated by the callouts to ensure consistent pressure
over the processor board.
4.Loosen the three Phillips PM2.5×5.0 captive screws (5), (6), and (7) that secure the fan/heat sink
assembly to the system board.
CAUTION:Loosen the screws in the order indicated by the callouts to ensure consistent pressure
over the processor board.
5.Remove the fan/heat sink assembly (8).
NOTE:Due to the adhesive quality of the thermal material located between the fan/heat sink...

6.Turn the system board upside down, with the expansion port 3 and external monitor port toward
you.
7.Disconnect the fan cable (1) from the system board.
8.Loosen the three Phillips PM2.5×14.0 spring-loaded, captive screws (2), (3), and (4) that secure
the fan/heat sink assembly to the system board.
CAUTION:Loosen the screws in the order indicated by the callouts to ensure consistent pressure
over the processor board.
9.Loosen the two Phillips PM2.5×5.0 captive screws (5) and (6) that secure the...

10.Remove the fan/heat sink assembly (7).
NOTE:Due to the adhesive quality of the thermal material located between the fan/heat sink
assembly and system board components, it may be necessary to move the fan/heat sink assembly
from side to side to detach the assembly.
NOTE:The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink
assembly and the system board each time the fan/heat sink assembly is removed. Thermal paste
is applied to the fan/heat sink assembly to correspond...

Processor
NOTE:The processor spare part kit includes thermal material.
DescriptionSpare part number
AMD Turion Ultra ZM-87, 2.40-GHz with 2-MB L2 cache572564-001
AMD Turion Ultra ZM-86, 2.40-GHz with 2-MB L2 cache507974-001
AMD Turion Ultra ZM-85, 2.30-GHz with 2-MB L2 cache532119-001
AMD Turion Ultra ZM-84, 2.30-GHz with 2-MB L2 cache507975-001
AMD Turion Ultra ZM-82, 2.20-GHz with 2-MB L2 cache507973-001
AMD Turion RM-77, 2.30-GHz with 1-MB L2 cache572565-001
AMD Turion RM-75, 2.20-GHz with 1-MB L2...

2.Lift the processor (2) straight up and remove it.
NOTE:The gold triangle (3) on the processor must be aligned with the triangle icon (4) embossed
on the processor socket when you install the processor.
Reverse this procedure to install the processor.
Component replacement procedures 97 

5 Setup Utility
WARNING!Only authorized technicians trained by HP must repair this equipment. All troubleshooting
and repair procedures are detailed to allow repair at only the subassembly or module level. Because of
the complexity of the individual boards and subassemblies, do not attempt to make repairs at the
component level or modify any printed wiring board. Improper repairs can create a safety hazard. Any
indication of component replacement or printed wiring board modification may void any warranty...

Using the Setup Utility
Changing the language of the Setup Utility
The following procedure explains how to change the language of the Setup Utility. If the Setup Utility is
not already running, begin at step 1. If the Setup Utility is already running, begin at step 2.
1.Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for
Startup Menu” message is displayed in the lower-left corner of the screen, press f10.
– or –
Open the Setup Utility by turning on or...

Displaying system information
The following procedure explains how to display system information in the Setup Utility. If the Setup
Utility is not open, begin at step 1. If the Setup Utility is open, begin at step 2.
1.Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for
Startup Menu” message is displayed in the lower-left corner of the screen, press f10.
– or –
Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for...

After either choice, the computer restarts in Windows.
Setup Utility menus
The menu tables in this section provide an overview of Setup Utility options.
NOTE:Some of the Setup Utility menu items listed in this chapter may not be supported by
your computer.
Main menu
SelectTo do this
System information
●View and change the system time and date.
●View identification information about the computer.
●View specification information about the processor, memory size,
system BIOS, and keyboard controller version...

SelectTo do this
Fan Always OnEnable/disable Fan Always On. When enabled, the computer fan will
always be on.
Boot Options Set the following boot options:
●f9 and f10 Delay (sec.)―Set the delay for the f9 and f10 functions
of the Setup Utility in intervals of 5 seconds each (0, 5, 10, 15, 20).
●CD-ROM boot―Enable/disable boot from CD-ROM.
●Floppy boot―Enable/disable boot from diskette.
●Internal Network Adapter boot―Enable/disable boot from Internal
Network Adapter.
●Boot Order―Set the boot order for:...