HP Pavilion Dm4 3100 Beats Edition Entertainment Notebook Pc Series Manual

11 Backup and recovery
Your computer includes tools provided by the operating system and HP to help you safeguard your
information and restore it if ever needed.
This chapter provides information on the following topics:
●Creating a set of recovery discs or a recovery flash drive (HP Recovery Manager software
feature)
●Performing a system restore (from the partition, recovery discs, or a recovery flash drive)
●Backing up your information
●Recovering a program or driver
81 

Restoring the system
If the computer hard drive fails, you must use a set of recovery discs or a recovery flash drive to
restore your system to its factory image. Ideally, you have already used HP Recovery Manager to
create these tools immediately after software setup.
For issues other than hard drive failure, you can restore your system by using the HP Recovery
partition, rather than by using recovery discs or a recovery flash drive. To check for the presence of a
recovery partition, click Start,...

Performing a system recovery
HP Recovery Manager software allows you to repair or restore the computer to its original factory
state. HP Recovery Manager works from recovery discs, a recovery flash drive, or from a dedicated
recovery partition on the hard drive. 
NOTE:A system restore must be performed if the computer hard drive fails or if all attempts to
correct any functional computer issues fail. A system restore should be used as a final attempt to
correct computer issues.
Note the following when...

Restoring using the restore media
1.If possible, back up all personal files.
2.Insert the first recovery disc into the optical drive on your computer or an optional external
optical drive, and then restart the computer.
– or –
Insert the recovery flash drive into a USB port on your computer, and then restart the computer.
NOTE:If the computer does not automatically restart in the HP Recovery Manager, the
computer boot order needs to be changed.
3.Press f9 at system bootup.
4.Select the optical drive or...

Backing up and recovering your information
It is very important to back up your files and keep any new software in a safe place. As you add new
software and data files, continue to create backups on a regular basis.
How completely you are able to recover your system depends on how recent your backup is.
NOTE:A recovery from your most recent backup needs to be performed if the computer has a virus
attack or if any major system components fail. In order to correct computer issues, a recovery should
first...

Using Windows Backup and Restore
Guidelines:
●Be sure that the computer is connected to AC power before you start the backup process.
●Allow enough time to complete the backup process. Depending on file sizes, it may take over an
hour.
To create a backup:
1.Select Start > Control Panel > System and Security > Backup and Restore.
2.Follow the on-screen instructions to schedule and create a backup.
NOTE:Windows® includes the User Account Control feature to improve the security of the
computer. You may be...

Create a system restore point
1.Select Start > Control Panel > System and Security > System.
2.In the left pane, click System Protection.
3.Click the System Protection tab.
4.Click Create, and then follow the on-screen instructions.
Restore to a previous date and time
To revert to a restore point (created at a previous date and time), when the computer was functioning
optimally, follow these steps:
1.Select Start > Control Panel > System and Security > System.
2.In the left pane, click System...

12 Setup Utility (BIOS) and System
Diagnostics
Using Setup Utility (BIOS)
Setup Utility, or Basic Input/Output System (BIOS), controls communication between all the input and
output devices on the system (such as disk drives, display, keyboard, mouse, and printer). Setup
Utility (BIOS) includes settings for the types of devices installed, the startup sequence of the
computer, and the amount of system and extended memory.
NOTE:Use extreme care when making changes in Setup Utility (BIOS). Errors can...

Navigating and selecting in Setup Utility (BIOS)
To navigate and select in Setup Utility (BIOS), follow these steps:
1.Turn on or restart the computer, and then press esc while the “Press the ESC key for Startup
Menu” message is displayed at the bottom of the screen.
●To select a menu or a menu item, use the tab key and the keyboard arrow keys and then
press enter.
●To scroll up and down, use the up arrow key or the down arrow key.
●To close open dialog boxes and return to the main Setup Utility (BIOS)...

Restoring factory settings in Setup Utility (BIOS)
NOTE:Restoring defaults will not change the hard drive mode.
To return all settings in Setup Utility (BIOS) to the values that were set at the factory, follow these
steps:
1.Turn on or restart the computer, and then press esc while the “Press the ESC key for Startup
Menu” message is displayed at the bottom of the screen.
2.Press f10 to enter Setup Utility (BIOS).
3.Use the arrow keys to select Exit > Load Setup Defaults. Press enter.
4.Follow the...