HP Pavilion Dm4 3000 Beats Edition Entertainment Notebook Pc Series Manual

							Left side
Component Description
(1)
Security cable slot  Attaches an optional security cable to the computer.
NOTE:The security cable is designed to act as a
deterrent, but it may not prevent the computer from being
mishandled or stolen.
(2)  Vents Enable airflow to cool internal components.
NOTE:The computer fan starts up automatically to cool
internal components and prevent overheating. It is normal
for the internal fan to cycle on and off during routine
operation.
(3)
Power light
●White: The computer is on.
●Blinking white: The computer is in the Sleep state.
●Off: The computer is off or in Hibernation.
(4)
Hard drive light
●Blinking white: The hard drive is being accessed.
●Amber: HP 3D DriveGuard has temporarily parked the
hard drive.
NOTE:For information on HP 3D DriveGuard, refer
to 
Using HP 3D DriveGuard (select models only)
on page 59.
(5)
External monitor port Connects an external VGA monitor or projector.
(6)
RJ-45 (network) jack Connects a network cable.
(7)
HDMI port Connects an optional video or audio device, such as a
high-definition television, or any compatible digital or audio
device.
(8)
USB 3.0 ports (2) Connect optional USB 3.0 devices and provide enhanced
USB power performance.
NOTE:The USB 3.0 port is also compatible with USB 1.0
and USB 2.0 devices.
Left side 11 
						

							Display
Component Description
(1)WLAN antennas (2)* Send and receive wireless signals to communicate with wireless
local area networks (WLANs).
(2)Internal microphones (2) Record sound.
(3)Webcam light On: The webcam is in use.
(4)Webcam Records video and captures still photographs.
To use the webcam, select Start > All Programs >
Communication and Chat > CyberLink YouCam.
*The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately
around the antennas free from obstructions. To see wireless regulatory notices, refer to the section of the Regulatory, Safety,
and Environmental Notices that applies to your country or region. These notices are located in Help and Support.
12 Chapter 2   Getting to know your computer 
						

							Bottom
Component Description
(1)  HP Triple Bass Reflex Subwoofers Provide superior bass sound
(2)  Battery bay Holds the battery.
(3)  Vents (3) Enable airflow to cool internal components.
NOTE:The computer fan starts up automatically to cool
internal components and prevent overheating. It is normal
for the internal fan to cycle on and off during routine
operation.
(4)
Battery release latch Releases the battery from the battery bay, and releases the
hard drive/memory module compartment cover.
(5)
Memory module compartment Contains the memory module slots, the wireless LAN
(WLAN) module, and the mSATA drive (select models
only).
(6)
Hard drive bay Holds the hard drive.
Bottom 13 
						

							Labels
The labels affixed to the computer provide information you may need when you troubleshoot system
problems or travel internationally with the computer:
●Serial number label—Provides important information, including the following:
Component
(1)Product name
(2)Serial number
(3)Product part number
(4)Warranty period
(5)Model description
Have this information available when you contact customer support. The serial number label is
affixed inside the battery bay.
●Microsoft® Certificate of Authenticity—Contains the Windows Product Key. You may need the
Product Key to update or troubleshoot the operating system. The Microsoft Certificate of
Authenticity is located on the bottom of the computer. 
●Regulatory label—Provides regulatory information about the computer. The regulatory label is
affixed inside the battery bay.
●Wireless certification label or labels (select models only)—Provide information about optional
wireless devices and the approval markings of some of the countries or regions in which the
devices have been approved for use. You may need this information when traveling
internationally. If your computer model includes one or more wireless devices, one or more
certification labels are included with your computer. Wireless certification labels are affixed to the
bottom of the computer.
14 Chapter 2   Getting to know your computer 
						

							3 HP QuickWeb
Getting started
The HP QuickWeb environment provides a fun and engaging way to perform many of your favorite
activities. Your computer is ready to go within seconds of starting QuickWeb, allowing you to rapidly
access the Internet, widgets, and communication programs. To use QuickWeb, press the QuickWeb
button, and then start browsing the Web, communicating with others using Skype, and exploring other
HP QuickWeb programs.
Your HP QuickWeb Home screen includes the following features:
●Web browser—Search and browse the Internet, and create links to your favorite Web sites.
●Skype (select models only)—Communicate using Skype, an application that uses voice over
Internet protocol (VoIP). Skype lets you make conference calls or have video chats with one or
more people at a time. You can also make long-distance phone calls to land lines.
●Widgets—Start using widgets for news, weather, social networking, stocks, a calculator, sticky
notes, and more. You can also use Widget Manager to add more widgets to the HP QuickWeb
Home screen.
NOTE:For additional information about using HP QuickWeb, refer to the HP QuickWeb software
Help.
Getting started 15 
						

							Starting HP QuickWeb
▲To start HP QuickWeb, press the QuickWeb button when the computer is off or in Hibernation.
The following table explains the different behaviors of the QuickWeb button.
Button Behavior
QuickWeb button
●When the computer is off or in Hibernation, press the
button to open HP QuickWeb.
●When the computer is in Microsoft Windows, press the
button to open the default Web browser.
●When the computer is in HP QuickWeb, press the
button to open the Web browser.
NOTE:If your computer does not have HP QuickWeb
software, the button opens the Web browser.
NOTE:For more information, refer to the HP QuickWeb software Help.
16 Chapter 3   HP QuickWeb 
						

							4Networking
Your computer supports two types of Internet access:
●Wireless—Refer to 
Creating a wireless connection on page 19.
●Wired—Refer to 
Connecting to a wired network on page 24.
NOTE:You must set up Internet service before you can connect to the Internet.
17 
						

							Using an Internet service provider
Before you can connect to the Internet, you must establish an account with an Internet service
provider (ISP). To purchase Internet service and a modem, contact a local ISP. The ISP will help set
up the modem, install a network cable to connect your wireless computer to the modem, and test the
Internet service.
NOTE:Your ISP will give you a user ID and password to access the Internet. Record this
information and store it in a safe place.
The following features will help you set up a new Internet account or configure the computer to use an
existing account:
●Internet Services & Offers (available in some locations)—This utility assists with signing up
for a new Internet account and configuring the computer to use an existing account. To access
this utility, select Start > All Programs > Online Services > Get Online.
●ISP-provided icons (available in some locations)—These icons may be displayed either
individually on the Windows desktop or grouped in a desktop folder named Online Services. To
set up a new Internet account or configure the computer to use an existing account, double-click
an icon, and then follow the on-screen instructions.
●Windows Connect to the Internet Wizard—This wizard allows you to connect to the Internet in
any of the following situations:
◦You already have an account with an ISP.
◦You do not have an Internet account and want to select an ISP from the list provided within
the wizard. (The list of ISP providers is not available in all regions.)
◦You have selected an unlisted ISP, and the ISP has provided you with information such as
a specific IP address and POP3 and SMTP settings.
To access the Windows Connect to the Internet Wizard and instructions for using it, select
Start > Control Panel > Network and Internet > Network and Sharing Center.
NOTE:If you are prompted within the wizard to choose between enabling or disabling
Windows Firewall, choose to enable the firewall.
18 Chapter 4   Networking 
						

							Creating a wireless connection
Your computer may be equipped with one or more of the following wireless devices:
●Wireless local area network (WLAN) device
●Bluetooth® device
For more information on wireless technology, refer to the information and Web site links provided in
Help and Support.
Identifying wireless and network status icons
Icon Name Description
HP Connection Manager Opens HP Connection Manager, which enables you to create and manage
WLAN, and Bluetooth connections.
Wired network (connected) Indicates that one or more network devices are connected to the network.
Network (disabled/
disconnected)Indicates that all network devices are disabled in Windows Control Panel.
Network (connected) Indicates that one or more network devices are connected to a network.
Network (disconnected) Indicates that network devices are not connected to a network.
Network (disabled/
disconnected)Indicates that no wireless connections are available.
Creating a wireless connection 19 
						

							Turning wireless devices on or off
You can use the wireless key or HP Connection Manager (select models only) to turn on and turn off
wireless devices. Refer to 
Using the action keys on page 30 for information on identifying the
location of the wireless key on your computer.
To turn off wireless devices using HP Connection Manager:
▲Right-click the HP Connection Manager icon in the notification area, at the far right of the
taskbar, and then click the power button next to the desired device.
– or –
Select Start > All Programs > HP Help and Support > HP Connection Manager, and then
click the power button next to the desired device.
Using HP Connection Manager (select models only)
HP Connection Manager provides a central location for managing your wireless devices. HP
Connection Manager allows you to manage the following devices:
●Wireless local area network (WLAN)/Wi-Fi
●Bluetooth®
HP Connection Manager provides information and notifications on connection status and power
status. Status information and notifications are provided in the notification area, at the far right of the
taskbar.
To open HP Connection Manager:
▲Click the HP Connection Manager icon in the notification area, at the far right of the taskbar.
– or –
Select Start > All Programs > HP Help and Support > HP Connection Manager.
For more information, refer to the HP Connection Manager software Help.
Using operating system controls
The Network and Sharing Center allows you to set up a connection or network, connect to a network,
manage wireless networks, and diagnose and repair network problems.
To use operating system controls:
▲Select Start > Control Panel > Network and Internet > Network and Sharing Center.
For more information, select Start > Help and Support.
Using a WLAN
A wireless connection connects the computer to Wi-Fi networks, or WLANs. A WLAN is composed of
other computers and accessories that are linked by a wireless router or a wireless access point.
20 Chapter 4   Networking