HP Pavilion Dm4 1100 Entertainment Notebook Pc Series Manual

							Conserving battery power
●Select the Power saver power plan through Power Options under System and Security in
Windows Control Panel.
●Turn off wireless and local area network (LAN) connections and exit modem applications when
you are not using them.
●Disconnect external devices that are not plugged into an external power source, when you are
not using them.
●Stop, disable, or remove any external media cards that you are not using.
●Use the f2 and f3 action keys to adjust screen brightness as needed.
●If you leave your work, initiate Sleep or Hibernation, or shut down the computer.
Storing a battery
CAUTION:To prevent damage to a battery, do not expose it to high temperatures for extended
periods of time.
If a computer will be unused and unplugged from external power for more than 2 weeks, remove the
battery and store it separately.
To prolong the charge of a stored battery, place it in a cool, dry place.
NOTE:A stored battery should be checked every 6 months. If the capacity is less than 50 percent,
recharge the battery before returning it to storage.
Calibrate a battery before using it if it has been stored for 1 month or more.
Disposing of a used battery
WARNING!To reduce the risk of fire or burns, do not disassemble, crush, or puncture a battery;
short the external contacts on a battery; or dispose of a battery in fire or water. Do not expose a
battery to temperatures above 60˚C (140˚F). Replace the battery only with a battery approved for this
computer.
Refer to the Regulatory, Safety and Environmental Notices for battery disposal information.
Replacing the battery
Computer battery life varies, depending on power management settings, programs running on the
computer, display brightness, external devices connected to the computer, and other factors.
Battery Check notifies you to replace the battery when an internal cell is not charging properly, or
when the battery storage capacity has reached a “weak” condition. A message refers you to the
HP Web site for more information about ordering a replacement battery. If the battery is possibly
covered by an HP warranty, instructions include a warranty ID.
NOTE:To ensure that you always have battery power when you need it, HP recommends
purchasing a new battery when the storage capacity indicator turns green-yellow.
Switching between graphics modes (select models only)
The computer is equipped with switchable graphics and has two modes for processing graphics.
When switching from AC power to battery power, the computer switches from high-performance
Switching between graphics modes (select models only) 61 
						

							mode to power-saving mode to conserve battery life. Similarly, when switching from battery power to
AC power, the computer switches back to the high-performance mode.
NOTE:In order to optimize computer performance, the system might not allow switching modes, or
prompt you to switch modes. It might be necessary to close all programs before switching.
NOTE:HDMI only works in the high-performance mode. HDMI cannot be used in power-saving
mode.
When switching between AC and battery power, you are notified that the computer is about to switch
graphics modes. If you prefer, choose to continue using the same graphics mode. While the computer
switches modes, the screen goes blank for a few seconds. When the switch is complete, a notification
appears in the notification area, and the screen image reappears.
NOTE:When select computer models are in slate mode, the screen orientations are reset when
switching between graphics modes.
To determine which graphics mode you are using, right-click on the Windows desktop, and then click
Configure Switchable Graphics or Configure ATI PowerXpress™.
Shutting down the computer
CAUTION:Unsaved information will be lost when the computer is shut down.
The Shut down command closes all open programs, including the operating system, and then turns
off the display and computer.
Shut down the computer under any of the following conditions:
●When you need to replace the battery or access components inside the computer
●When you are connecting an external hardware device that does not connect to a USB port
●When the computer will be unused and disconnected from external power for an extended
period
Although you can shut down the computer with the power button, the recommended procedure is to
use the Windows Shut down command.
To shut down the computer:
NOTE:If the computer is in the Sleep state or in Hibernation, you must first exit Sleep or
Hibernation before shutdown is possible.
1.Save your work and close all open programs.
2.Click Start.
3.Click Shut down.
If the computer is unresponsive and you are unable to use the preceding shutdown procedures, try
the following emergency procedures in the sequence provided:
●Press ctrl+alt+delete, and then click the power button.
●Press and hold the power button for at least 5 seconds.
●Disconnect the computer from external power and remove the battery.
62 Chapter 5   Power management 
						

							6Drives
Identifying installed drives
Your computer includes a solid state drive (SSD) with solid-state memory. Because it has no moving
parts, an SSD does not generate as much heat as other hard drives.
To view the drives installed on the computer, select Start > Computer.
Handling drives
Drives are fragile computer components that must be handled with care. Refer to the following
cautions before handling drives. Additional cautions are included with the procedures to which they
apply.
CAUTION:To reduce the risk of damage to the computer, damage to a drive, or loss of information,
observe these precautions:
Before you move a computer that is connected to an external hard drive, initiate Sleep and allow the
screen to clear, or properly disconnect the external hard drive.
Before handling a drive, discharge static electricity by touching the unpainted metal surface of the
drive.
Do not touch the connector pins on a removable drive or on the computer.
Handle a drive carefully; do not drop a drive or place items on it.
Before removing or inserting a drive, shut down the computer. If you are unsure whether the
computer is off, in the Sleep state, or in Hibernation, turn the computer on, and then shut it down
through the operating system.
Do not use excessive force when inserting a drive into a drive bay.
Do not type on the keyboard or move the computer while the optical drive (select models only) is
writing to a disc. The write process is sensitive to vibration.
When the battery is the only source of power, be sure that the battery is sufficiently charged before
writing to media.
Avoid exposing a drive to temperature or humidity extremes.
Avoid exposing a drive to liquids. Do not spray the drive with cleaning products.
Remove media from a drive before removing the drive from the drive bay, or traveling with, shipping,
or storing a drive.
If a drive must be mailed, place the drive in a bubble-pack mailer or other suitable protective
packaging and label the package “FRAGILE.”
Avoid exposing a drive to magnetic fields. Security devices with magnetic fields include airport walk-
through devices and security wands. The airport security devices that check carry-on luggage, such
as conveyor belts, use X-rays instead of magnetism and will not damage a drive.
Identifying installed drives 63 
						

							Improving hard drive performance
Using Disk Defragmenter
As you use the computer, files on the hard drive become fragmented. Disk Defragmenter
consolidates the fragmented files and folders on the hard drive so that the system can run more
efficiently.
After you start Disk Defragmenter, it works without supervision. Depending on the size of your hard
drive and the number of fragmented files, Disk Defragmenter may take more than an hour to
complete. You may want to set it to run during the night or another time when you do not need access
to your computer.
HP recommends defragmenting your hard drive at least once a month. You may set Disk
Defragmenter to run on a monthly schedule, but you can defragment your computer manually at any
time.
To run Disk Defragmenter:
1.Select Start > All Programs > Accessories > System Tools > Disk Defragmenter.
2.Click Defragment now.
NOTE:Windows includes the User Account Control feature to improve the security of your
computer. You may be prompted for your permission or password for tasks such as installing
software, running utilities, or changing Windows settings. Refer to Windows Help and Support
for more information.
For additional information, access the Disk Defragmenter software Help.
Using Disk Cleanup
Disk Cleanup searches the hard drive for unnecessary files that you can safely delete to free up disk
space and help the computer to run more efficiently.
To run Disk Cleanup:
1.Select Start > All Programs > Accessories > System Tools > Disk Cleanup.
2.Follow the on-screen instructions.
Using HP ProtectSmart Hard Drive Protection
HP ProtectSmart Hard Drive Protection protects the hard drive by parking the drive and halting I/O
requests under either of the following conditions:
●You drop the computer.
●You move the computer with the display closed while the computer is running on battery power.
A short time after the end of one of these events, HP ProtectSmart Hard Drive Protection returns the
hard drive to normal operation.
NOTE:Because solid-state drives (SSDs) lack moving parts, HP ProtectSmart Hard Drive
Protection is unnecessary.
NOTE:Hard drives connected to USB ports are not protected by HP ProtectSmart Hard Drive
Protection.
For more information, refer to the HP ProtectSmart Hard Drive Protection software Help.
64 Chapter 6   Drives 
						

							Identifying HP ProtectSmart Hard Drive Protection status
The drive light on the computer turns amber to show that the drive is parked. To determine whether a
drive is currently protected or whether a drive is parked, select Start > Control Panel > Hardware
and Sound > Windows Mobility Center.
●If the software is enabled, a green check mark is superimposed over the hard drive icon.
●If the software is disabled, a red X is superimposed over the hard drive icon.
●If the drive is parked, a yellow moon is superimposed over the hard drive icon.
The icon in the Mobility Center may not show the most up-to-date status for the drive. For immediate
updates after a change in status, you need to enable the notification area icon.
To enable the notification area icon:
1.Select Start > Control Panel > Hardware and Sound > HP ProtectSmart Hard Drive
Protection.
2.On the Icon in System Tray row, click Show.
3.Click OK.
If HP ProtectSmart Hard Drive Protection has parked the drive, the computer will behave in the
following ways:
●The computer will not shut down.
●The computer will not initiate Sleep or Hibernation, except as described in the following Note.
NOTE:If the computer is running on battery power and reaches a critical battery level,
HP ProtectSmart Hard Drive Protection allows the computer to initiate Hibernation.
●The computer will not activate battery alarms set on the Alarms tab in Power Options properties.
Before you move the computer, HP recommends that you either shut it down or initiate Sleep or
Hibernation.
Using HP ProtectSmart Hard Drive Protection software
The HP ProtectSmart Hard Drive Protection software enables you to perform the following tasks:
●Enable and disable HP ProtectSmart Hard Drive Protection.
NOTE:Depending on your user privileges, you may not be able to enable or disable
HP ProtectSmart Hard Drive Protection. Additionally, members of an Administrator group can
change the privileges for non-administrator users.
●Determine whether a drive in the system is supported.
To open the software and change settings, follow these steps:
1.In Mobility Center, click the hard drive icon to open the HP ProtectSmart Hard Drive Protection
window.
– or –
Select Start > Control Panel > Hardware and Sound > HP ProtectSmart Hard Drive
Protection.
2.Click the appropriate button to change settings.
3.Click OK.
Using HP ProtectSmart Hard Drive Protection 65 
						

							Replacing the hard drive
CAUTION:To prevent information loss or an unresponsive system:
Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the
hard drive while the computer is on, in the Sleep state, or in Hibernation.
If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the
power button. Then, shut down the computer through the operating system.
To remove the hard drive:
1.Save your work.
2.Shut down the computer and close the display.
3.Disconnect all external devices connected to the computer.
4.Unplug the power cord from the AC outlet.
5.Turn the computer upside down on a flat surface, and then remove the battery.
NOTE:To be able to remove the hard drive from the computer, you must first remove the
memory/wireless module compartment cover.
6.With the hard drive bay toward you, loosen the memory/wireless module compartment cover
screws (1).
7.Lift the memory/wireless module compartment cover (2) away from the computer.
8.Loosen the hard drive cover screws (1).
66 Chapter 6   Drives 
						

							9.Lift the hard drive cover up at an angle and remove it from the computer (2).
10.Disconnect the hard drive cable from the system board (1).
11.Lift the hard drive out of the hard drive bay (2).
12.Disconnect the hard drive cable from the hard drive (1).
13.Remove the screws (2) that secure the protective cover to the hard drive.
Replacing the hard drive 67 
						

							14.Slide the protective cover (3) off the hard drive.
To install a hard drive:
1.Slide the protective cover (1) on to the hard drive.
2.Replace the screws (2) that secure the protective cover to the hard drive.
3.Connect the hard drive cable to the hard drive (3).
4.Insert the hard drive into the hard drive bay at a 45-degree angle (1).
68 Chapter 6   Drives 
						

							5.Connect the hard drive cable to the hard drive connector on the system board (2).
6.Align the tabs on the hard drive cover with the notches on the computer.
7.Close the cover (1).
8.Tighten the hard drive cover screws (2).
9.Align the tabs (1) on the memory/wireless module compartment cover with the notches on the
computer.
Replacing the hard drive 69 
						

							10.Close the cover (2).
11.Tighten the memory/wireless module compartment cover screws (3).
12.Replace the battery.
13.Turn the computer right-side up, and then reconnect external power and external devices.
14.Turn on the computer.
70 Chapter 6   Drives