HP Pavilion Dm1 3100 Entertainment Notebook Pc Series Manual

3.Lift up and remove the power connector (3).
Reverse this procedure to install the power connector.
RJ45 connector cover
To remove the RJ45 connector cover, follow these steps:
1.Slide the RJ45 cover to the right (grasping the cover at the indentation on the left side) (1) in
order to release the cover.
2.Gently press the hinged bottom of the rubber tail and pull the RJ45 cover off of the computer (2).
ENWW Component replacement procedures 63 

Reverse this procedure to install the RJ-45 connector cover.
RJ-45 connector
DescriptionSpare part number
RJ-45 connector (includes cable) 636452-001
Before removing the RJ-45 connector, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation mode,
turn on the computer, and then shut it down using the operating system.
2.Disconnect all of the external devices that are connected to the computer.
3.Disconnect the power from the computer by first...

Reverse this procedure to install the RJ-45 connector.
Fan
DescriptionSpare part number
Fan (includes cable)611688-001
Before removing the fan, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation mode,
turn on the computer, and then shut it down using the operating system.
2.Disconnect all of the external devices that are connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and...

Remove the fan:
To remove the fan, follow these steps:
1.Disconnect the fan cable (1) from the system board.
2.Remove the 3 screws (1) that secure the fan to the base enclosure.
3.Lift up and remove the fan (2).
Reverse this procedure to install the fan.
66 Chapter 4   Removal and replacement procedures ENWW 

5 Computer Setup
Computer Setup in Windows 7
Starting Setup Utility
Setup Utility is a ROM-based information and customization utility that can be used even when the
Windows operating system is not working.
The utility reports information about the device and provides settings for startup, security, and other
preferences.
To start Setup Utility:
▲Open Setup Utility by turning on or restarting the device, and then pressing f10 while the “F10 =
BIOS Setup Options” message is displayed in the lower-left...

Navigating and selecting in Setup Utility
Because Setup Utility is not Windows based, it does not support the TouchPad. Navigation and
selection are by keystroke.
●To choose a menu or a menu item, use the arrow keys.
●To choose an item in a list or to toggle a field, for example an Enable/Disable field, use either the
arrow keys or f5 or f6.
●To select an item, press enter.
●To close a text box or return to the menu display, press esc.
●To display additional navigation and selection information while the...

Exiting Setup Utility
You can exit Setup Utility with or without saving changes.
●To exit Setup Utility and save your changes from the current session:
If the Setup Utility menus are not visible, press esc to return to the menu display. Then use the
arrow keys to select Exit > Exit Saving Changes, and then press enter.
●To exit Setup Utility without saving your changes from the current session:
If the Setup Utility menus are not visible, press esc to return to the menu display. Then use the
arrow keys to...

Select To do this
Processor C4 State Enable/disable the processor C4 sleep state
Boot Options Set the following boot options:
●f10 and f12 Delay (sec.)―set the delay for the f10 and f12
functions of the Setup Utility in intervals of 5 seconds each (0, 5,
10, 15, 20)
●Internal Network Adapter boot―enable/disable boot from the
internal network adapter.
●Boot Order―set the boot order for the following:
◦Internal hard drive (select models only)
◦USB floppy drive
◦USB CD/DVD ROM drive
◦USB flash drive
◦USB...

6 Specifications
Computer specifications
 Metric U.S.
Dimensions
Depth20.40 cm8.03 in
Width28.90 cm11.37 in
Height1.98 cm0.78 in
Weight
Equipped with a hard drive1470 g3.24 lb
Equipped with a solid-state drive1449 g3.19 lb
Input power
Operating voltage 19 V dc @ 1.58 A – 30 W
Operating current 1.58 A
Temperature
Operating5°C to 35°C41°F to 95°F
Nonoperating-20°C to 65°C-4°F to 149°F
Relative humidity (noncondensing)
Operating 10% to 90%
Nonoperating 0% to 95%
Maximum altitude (unpressurized)
Operating-15...

29.5-cm (11.6-in) (1366 x 768) HD BrightView LED display
specifications
Dimensions Metric U.S.
Height12.53 cm4.93 in
Width22.27 cm8.77 in
Diagonal25.55 cm10.06 in
Number of colors262,144
Contrast ratio400:1 (typical)
Brightness200 nits (typical)
Pixel resolution
Pitch 0.2175 × 0.2175 mm
Format 1024 × 600
Configuration RGB vertical stripe
BacklightEdge lit
Character display80 × 25
Total power consumption3.0 W
Viewing angle±40° horizontal, +20/-40° vertical (typical)
72 Chapter 6   SpecificationsENWW