HP Pavilion Dm1 3100 Entertainment Notebook Pc Series Manual

SIM Card
NOTE:The SIM card is provided by the end user as a security measure for the WWAN module. The
SIM card should be removed, placed into a static-dissipative container, and then replaced when the
computer is reassembled.
Before removing the SIM card, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation mode,
turn the computer on, and then shut it down through the operating system.
2.Disconnect all of the external devices that are connected to...

DescriptionSpare part number
●500-GB, 7200-rpm634919-001
●250-GB, 7200-rpm634861-001
Hard Drive Mounting Kit (includes mounting bracket and screws) 637177-001
Solid state drive, 128-GB 635313-001
Before removing the hard drive or solid state drive, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation mode,
turn on the computer, and then shut it down using the operating system.
2.Disconnect all of the external devices that are connected to the...

6.Disconnect the hard drive/solid state drive connector from the system board (1), and then
remove the four screws (2) that secure the hard drive/solid state drive to the base enclosure.
7.Lift the hard drive/solid state drive out of the hard drive/solid state drive bay.
8.If it is necessary to replace the hard drive/solid state drive bracket or connector, follow these
steps:
a.Remove the 4 screws (1) that secure the hard drive/solid state drive bracket to the hard
drive/solid state drive.
ENWW Component...

b.Lift the hard drive/solid state drive (3) straight up to remove it from the hard drive/solid state
drive bracket.
Reverse this procedure to install the hard drive/solid state drive.
36 Chapter 4   Removal and replacement procedures ENWW 

WWAN module
DescriptionSpare part number
WWAN module531993-001
Before removing the WWAN module, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation mode,
turn on the computer, and then shut it down using the operating system.
2.Disconnect all of the external devices that are connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the...

4.Remove the WWAN module (3) by pulling the module away from the slot at an angle.
NOTE:WWAN modules are designed with a notch (4) to prevent incorrect insertion of the
WWAN module into the WWAN module slot.
Reverse this procedure to install the WWAN module.
38 Chapter 4   Removal and replacement procedures ENWW 

WLAN module
DescriptionSpare part number
WLAN module: 
Broadcom 4313 802.11b/g/n 1x1 WiFi and 2070 Bluetooth 2.1+EDR Combo adapter (BT3.0+HS
ready)600370-001
Ralink RT3090BC4 802.11b/g/n 1x1 WiFi and Bluetooth 2.1+EDR Combo adapter (BT3.0+HS
ready)630705–001
Before removing the WLAN module, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation mode,
turn on the computer, and then shut it down using the operating system.
2.Disconnect all of the...

4.Remove the WLAN module (3) by pulling it away from the slot at an angle.
NOTE:WLAN modules are designed with a notch (4) to prevent incorrect insertion of the
WLAN module into the WLAN module slot.
Reverse this procedure to install the WLAN module.
40 Chapter 4   Removal and replacement procedures ENWW 

Memory modules 
DescriptionSpare part number
1-GB memory module (1333-MHz, DDR3) 598859-001
2-GB memory module (1333-MHz, DDR3) 598856-001
4-GB memory module (1333-MHz, DDR3) 599092-001
Before removing the memory module, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation mode,
turn on the computer, and then shut it down using the operating system.
2.Disconnect all of the external devices that are connected to the computer.
3.Disconnect the power...

5.Lift up the regulatory label to access the memory modules.
6.If you are replacing a memory module, remove the existing memory module:
a.Pull away the retention clips (1) on each side of the memory module.
The memory module tilts up.
b.Grasp the edge of the memory module (2), and then gently pull the memory module out of
the memory module slot.
CAUTION:To prevent damage to the memory module, hold the memory module by the
edges only. Do not touch the components on the memory module.
To protect a memory...