HP OfficeJet Pro K8600dn User Manual

Set minimum margins
The document margins must match (or exceed) these margin settings in portrait
orientation.
Media(1) Left
margin(2) Right
margin(3) Top
margin(4) Bottom
margin*
U.S. Letter
U.S. Legal
A4
U.S. Executive
U.S. Statement
8.5 x 13 inch
B5
A5
Cards
Custom-sized media
Photo media
A6
Banner media
Ofuku Hagaki
Hagaki Card3.3 mm (0.13
inch)3.3 mm (0.13
inch)3.3 mm (0.13
inch)
NOTE:If
you are using
the duplexer
(available
with some
models), the
minimum top
margin must
match or
exceed 12
mm (0.48...

Media(1) Left
margin(2) Right
margin(3) Top
margin(4) Bottom
margin*
NOTE:If
you are
using the
duplexer
(available
with some
models), the
minimum
bottom
margin must
match or
exceed 20
mm (0.79
inch).
Envelopes3.3 mm (0.13
inch)3.3 mm (0.13
inch)16.5 mm
(0.65 inch)16.5 mm
(0.65 inch)
Panorama3.3 mm (0.13
inch)3.3 mm (0.13
inch)3.3 mm (0.13
inch)3.3 mm (0.13
inch)
* To achieve this margin setting on a computer running Windows, click the Advanced
tab in the print driver, and select Minimize Margins.
Load...

3.Slide the media guides in the tray to adjust them for the media size that you have
loaded, and then lower the output tray.
4.Pull out the extension on the output tray.
To load small media
NOTE:If you are printing on thick paper (such as cardstock), you can use the
rear manual feed slot. For more information, see 
Print with the rear manual feed slot.
1.Raise the output tray and remove any media from the input tray.
2.Insert a stack of media that does not exceed the height of the paper guide, print-...

4.Press the button on top of the paper guide and slide the guide to the right until it
stops at the edge of the media.
5.Press the input tray lock and slide the tray in until the small media guide stops at
the edge of the media. As you slide the tray, the small media guide extends until it
touches the edge of the media.
6.Lower the output tray.
7.When printing, select the appropriate media type and size from the printer driver.
For more information, see 
Understand specifications for supported media.
To...

5.Insert a sheet of media print-side up into the left side of the slot for the device to
load automatically.
6.
Press 
 (Resume button) to print.
7.
If you are printing more than one page, press 
 (Resume button) to print after
inserting each sheet.
Change print settings
You can change print settings (such as paper size or type) from an application or the
printer driver. Changes made from an application take precedence over changes
made from the printer driver. However, after the application is closed,...

Use the HP Solution Center (Windows)
Use the HP Solution Center to change print settings, order supplies, and access the
onscreen Help.
The features available in the HP Solution Center vary depending on the devices you
have installed. The HP Solution Center is customized to show icons that are
associated with the selected device. If the selected device is not equipped with a
particular feature, then the icon for that feature does not appear in the HP Solution
Center.
If the HP Solution Center on your...

Print on both sides (duplexing)
You can print on both sides of a sheet of media, either automatically by using the
optional automatic two-sided printing accessory (duplexer), or manually by turning the
media over and feeding it into the device again.
•
Guidelines for printing on both sides of a page
•
To perform duplexing (Windows)
•
To perform automatic duplexing (Mac OS)
Guidelines for printing on both sides of a page
• Always use media that conforms to the device specifications. For more
information,...

7.Select or clear the Flip Pages Up check box depending on which way you want
the binding. See the graphics in the print driver for examples.
8.Choose a booklet layout from the Booklet Layout drop-down list, if you want.
9.Change any other settings, and then click OK.
10.Print your document.
To perform automatic duplexing (Mac OS)
1.Load the appropriate media. For more information, see Guidelines for printing on
both sides of a page and Load media.
2.Make sure the duplexer is properly installed. For more...

To print on special or custom-sized media (Mac OS)
1.Load the appropriate media. For more information, see Load media.
2.On the File menu, click Page Setup.
3.Select the media size.
4.To set a custom media size:
a. Click Manage Custom Sizes in the Paper Size pull-down menu.
b. Click New and type a name for the size in the Paper Size Name box.
c. In the Width and Height boxes, type the dimensions and set the margins, if
desired.
d. Click Done or OK, and then click Save.
5.On the File menu, click Page...

9.If you are printing photos, select Best from the Print Quality drop-down list.
Alternatively, select Maximum dpi, which provides up to 4800 x 1200 optimized
dpi* for optimum print quality.
*Up to 4800 x 1200 optimized dpi for color printing and 1200 input dpi. This setting
might temporarily use a large amount of hard disk space (400 MB or more) and will
print more slowly.
10.Change any other print settings, and then click OK.
11.Print the document.
12.If you printed on photo media with a tear-off tab,...