HP Officejet Pro 8600 Premium User Manual

1Telephone wall jack
2 Use the phone cord supplied in the box with the printer to connect to
the 1-LINE port
You might need to connect the supplied phone cord to the adapter
provided for your country/region.
4 Computer with modem
5 Telephone
To set up the printer on the same phone line as a computer with two phone ports
1.Remove the white plug from the port labeled 2-EXT on the back of the printer.
2. Find the phone cord that connects from the back of your computer (your computer dial-up
modem) to a...

Swedenwww.hp.se/faxconfig
Norway
www.hp.no/faxconfig
Netherlands
www.hp.nl/faxconfig
Belgium (Dutch)
www.hp.be/nl/faxconfig
Belgium (French)
www.hp.be/fr/faxconfig
Portugal
www.hp.pt/faxconfig
Spain
www.hp.es/faxconfig
France
www.hp.com/fr/faxconfig
Ireland
www.hp.com/ie/faxconfig
Italy
www.hp.com/it/faxconfig
Test fax setup
You can test your fax setup to check the status of the printer and to make sure it is set up
correctly for faxing. Perform this test after you have completed setting up the printer...

D Network setup
You can manage network settings for the printer through the printer control panel as described in
the next section. Additional advanced settings are available in the embedded web server,
a configuration and status tool you access from your web browser using an existing network
connection to the printer. For more information, see 
Embedded web server.
This section contains the following topics:
•
Change basic network settings
•
Change advanced network settings
•
Set up the printer for...

Set link speed
You can change the speed at which data is transmitted over the network. The default is
Automatic.
1. Touch 
 (right arrow), touch  Setup, and then touch  Network.
2. Touch  Advanced Setup , then touch Link Speed.
3. Touch the number next to the link speed that matches your network hardware.
View IP settings
To view the IP address of the printer:
• Print the network configuration page. For more information, see 
Understand the network
configuration page.
-Or-
• Open the HP software...

This section contains the following topics:
•
Create a firewall rule
•
Change the priority of firewall rules
•
Change firewall options
•
Reset firewall settings
•
Limitations to rules, templates, and services
Create a firewall rule
To create a firewall rule, complete the following steps:
1. Open the embedded web server. For more information, see 
Embedded web server.
2. Click the  Settings tab, click  Firewall Rules .
3. Click  New, and then follow the onscreen instructions.
NOTE: After clicking  Apply,...

ItemLimit
NOTE: The predefined All Services template
is not subject to this limitation and includes all
services supported by the print server.
Maximum number of services you can add to
the policy.
For a given rule, only one address template
and one service template can be added. 40
Maximum number of service templates in the
policy. 10
Maximum number of user-defined custom
service templates. 5
Reset network settings
To reset the administrator password and network settings, touch  (right arrow), touch...

While connecting the printer, you might be prompted to enter the wireless network name (SSID)
and a wireless password:
• The wireless network name is the name of your wireless network.
• The wireless password prevents other people from connecting to your wireless networkwithout your permission. Depending on the level  of security required, your wireless network
might use either a WPA key or WEP passphrase.
If you have not changed the network name or the security passkey since setting up your wireless...

NOTE:Only set up wireless using WPS if your wireless network uses WPA data encryption.
If your wireless network uses WEP or is not using any encryption at all, use one of the other
methods provided in this section to set up the printer on your wireless network.
NOTE: To use WPS, make sure your wireless router or wireless access point supports
WPS. Routers that support WPS often have a 
 (WPS) button or a button labeled "WPS".
You can use one of the following methods to set up the printer using...

NOTE:If you are changing to a wireless connection, make sure that an Ethernet cable has
not been connected to the printer. Connecting an Ethernet cable turns off the printer's
wireless capabilities.
You might be prompted to temporarily connect a USB cable during the setup process.
To change from an Ethernet connection to a wireless connection
1. On the printer control panel, touch 
 (right arrow), and then touch  Network.
2. Touch  Wireless , touch Wireless Setup Wizard , and then touch OK.
3. Follow...

Overview of security settings
To help improve the security of the wireless network and prevent unauthorized access, the printer
supports many common types of network authentication, including WEP, WPA, and WPA2.
• WEP: Provides security by encrypting data sent over radio waves from one wireless device toanother wireless device. Devices on a WEP-enabled network use WEP keys to encode data.
If your network uses WEP, you must know the WEP key(s) it uses.
• WPA: Increases the level of over-the-air data...