HP Le2002xm User Guide

Connecting the Cables
1.Place the monitor in a convenient, well-ventilated location near the computer.
2.Remove the cable management clip from the pedestal by pulling outward on the two sides of the
clip (1) then lifting the clip off the pedestal (2).
Figure 2-3  Removing the Cable Management Clip
3.Connect a VGA signal cable or DVI-D signal cable (select models).
NOTE:The monitor is capable of supporting either analog or digital input (select models). The
video mode is determined by the video cable...

5.Connect one end of the power cord to the AC power connector on the back of the monitor, and
the other end to an electrical wall outlet.
Figure 2-4  Connecting the Cables
WARNING!To reduce the risk of electric shock or damage to the equipment:
Do not disable the power cord grounding plug. The grounding plug is an important safety
feature.
Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all
times.
Disconnect power from the equipment by unplugging the power...

Front Panel Controls
Figure 2-6  Monitor Front Panel Controls
Table 2-1  Monitor Front Panel Controls
Control Function
1
Menu Opens, selects or exits the OSD menu.
2
Minus If the OSD menu is on, press to navigate backward through
the OSD menu and decrease adjustment levels.
If the OSD menu is inactive, press to activate the volume
adjustment bar. Press - or + to adjust the volume (select
models).
3
Plus/source If the OSD menu is on, press to navigate forward through
the OSD menu and increase adjustment...

Adjusting the Monitor
Tilt the monitors panel forward or backward to set it to a comfortable eye level.
Figure 2-7  Tilting the Monitor
Turning on the Monitor
1.Press the power button on the computer to turn it on.
2.Press the power button on the front of the monitor to turn it on.
CAUTION:Burn-in image damage may occur on monitors that display the same static image on
screen for a prolonged period of time.* To avoid burn-in image damage on the monitor screen, you
should always activate a screen saver...

Removing the Monitor Pedestal Base
You can remove the monitor panel from the pedestal base to install the panel on a wall, a swing arm,
or other mounting fixture.
CAUTION:Before beginning to disassemble the monitor, be sure the monitor is turned off and the
power and signal cables are both disconnected.
1.Disconnect and remove the signal and power cables from the monitor.
2.Lay the monitor face down on a flat surface covered by a clean, dry cloth.
3.Remove the four pedestal neck screws (1) and lift the...

2.To attach the monitor to a swing arm, insert four 10mm screws through the holes on the swing
arm plate and into the mounting holes on the monitor.
Figure 2-9  Mounting the Monitor
To attach the monitor to other mounting fixtures, follow the instructions included with the
mounting fixture to ensure that the monitor is safely attached.
3.Reconnect the cables to the monitor panel.
Installing a Cable Lock
You can secure the monitor to a fixed object with an optional cable lock available from HP.
Figure...

3 Finding More Information
Refer to the HP LCD Monitors Reference Guide included on the CD with your monitor for additional
information on:
●Optimizing monitor performance
●Safety and maintenance guidelines
●Installing software from the CD
●Using the OSD menu
●Downloading software from the Web
For additional information on using and adjusting your monitor, go to 
http://www.hp.com/support.
Select your country or region, select Product Support & Troubleshooting, and then enter your monitor
model in the...

4 Technical Specifications
NOTE:All specifications represent the typical specifications provided by HPs component
manufacturers; actual performance may vary either higher or lower.
LE1902x Model
Table 4-1  LE1902x Specifications
Maximum Weight (Unpacked) 2.8 kg 6.17 lbs
Dimensions (include base)
Height
Depth
Width33.89 cm
12.6 cm
44.93 cm13.34 inches
4.96 inches
17.69 inches
Maximum Graphic Resolution1366 x 768 (60 Hz) analog input
1366 x 768 (60 Hz) digital input
Optimum Graphic Resolution 1600 x 900...

LE2202x Model
Table 4-3  LE2202x Specifications
Maximum Weight (Unpacked) 3.6 kg 7.94 lbs
Dimensions (include base)
Height
Depth
Width37.9 cm
16 cm
51.8 cm14.92 inches
6.3 inches
20.39 inches
Maximum Graphic Resolution 1920 x 1080 (60 Hz) analog input
1920 x 1080 (60 Hz) digital input
Optimum Graphic Resolution 1920 x 1080 (60 Hz) analog input
1920 x 1080 (60 Hz) digital input 
Power Source 100 – 240 VAC 50/60 Hz  
Input Terminal One VGA connector with cable included;
one DVI connector with cable...

Table 4-5  Factory Preset Modes (continued)
2 720 × 400 31.469 70.087
3 800 × 600 37.879 60.317
4 1024 × 768 48.363 60.004
5 1280 × 720 45.00 59.94
6 1280 × 1024 63.981 60.02
7 1440 × 900 55.935 59.887
8 1600 × 900 55.935 59.887
LE2202x Model
Table 4-6  Factory Preset Modes
Preset Pixel Format Horz Freq (kHz) Vert Freq (Hz)
1 640 × 480 31.469 59.940
2 720 × 400 31.469 70.087
3 800 × 600 37.879 60.317
4 1024 × 768 48.363 60.004
5 1280 × 720 45.00 60.00
6 1280 × 1024 63.981 60.02
7 1440 × 900 55.94 59.89
8...