HP Le1851w User Guide

2.Slide the multiseat computing device onto the bracket.
Figure 3-11  Installing the MultiSeat Computing Device
3.Connect the cables. Refer to LE1851wt Model (Connecting for MultiSeat Computing) on page 7
for instructions on connecting the cables.
Locating the Rating Labels
The rating labels on the monitor provide the spare part number, product number, and serial number.
You may need these numbers when contacting HP about the monitor model. The rating labels are
located on the rear panel of the monitor....

4 Operating the Monitor
Software and Utilities
The CD that comes with the monitor contains files you can install on the computer:
●an .INF (Information) file
●an .ICM (Image Color Matching) file
●auto-adjustment pattern utility
●additional software for the monitor model
NOTE:If the monitor does not include a CD, the .INF and .ICM files can be downloaded from the HP
monitors support Web site. See 
Downloading from the Worldwide Web on page 15 in this chapter.
The Information File
The .INF file defines...

Installing the .INF and .ICM Files
After you determine that you need to update, you can install the .INF and .ICM files from the CD or
download them.
Installing from the CD
To install the .INF and .ICM files on the computer from the CD:
1.Insert the CD in the computer CD-ROM drive. The CD menu is displayed.
2.View the Monitor Driver Software Readme file.
3.Select Install Monitor Driver Software.
4.Follow the on-screen instructions.
5.Ensure that the proper resolution and refresh rates appear in the...

To use the auto-adjustment feature:
1.Allow the monitor to warm up for 20 minutes before adjusting.
2.Press the OK/auto button on the monitor front panel.
●You can also press the Menu button, then select Image Control > Auto-Adjustment from
the OSD Main Menu. Refer to 
Adjusting the Monitor Settings on page 18 in this chapter.
●If the result is not satisfactory, continue with the procedure.
3.Insert the CD in the disc drive. The CD menu is displayed.
4.Select Open Auto-Adjustment Software. The setup test...

Front Panel Controls
Table 4-1  Monitor Front Panel Controls
Control Function
1
Menu Opens, selects or exits the OSD menu.
2
Minus
Volume/Minus
(LE2001wm model only)If the OSD menu is on, press to navigate backward through
the OSD menu and decrease adjustment levels.
If the OSD menu is inactive, press to open the Volume
adjustment OSD sub-menu (LE2001wm Model only).
3
Plus
Plus/source (LE2001wm
model only)If the OSD menu is on, press to navigate forward through
the OSD menu and increase adjustment...

Adjusting the Monitor Settings
The monitor settings can be adjusted from the On-Screen Display (OSD) menu or from the HP Display
Assistant utility.
NOTE:If there is a problem with the display settings, try resetting the settings to the factory defaults
by opening the OSD and selecting Factory Reset from the OSD menu.
Using the On-Screen Display Menu
Use the On-Screen Display (OSD) to adjust the screen image based on your viewing preferences. To
access the OSD, do the following:
1.If the monitor is not...

OSD Menu Selections
The following table lists the On-Screen Display (OSD) menu selections and their functional descriptions.
After changing an OSD menu item, and if the menu screen has these options, you may choose to:
●Cancel—to return to the previous menu level.
●Save and Return—to save all changes and return to the OSD Main Menu screen. This Save
and Return option is only active if you change a menu item.
Table 4-2  OSD Menu
Icon Main Menu Submenu Description
Brightness Adjustable scale Adjusts the...

Table 4-2  OSD Menu (continued)
Icon Main Menu Submenu Description
Custom Scaling Selects the method on how displayed information on 
the monitor will be formatted. Select: 
● Fill to Screen - image fills the entire screen and 
may look distorted or elongated because of non- 
proportional scaling of height and width 
● Fill to Aspect Ratio - image is sized to fit the 
screen and maintains proportional image
Sharpness (non-native 
modes) 
Adjusts the screen image to look sharper or soft.
OSD Control...

Table 4-2  OSD Menu (continued)
Icon Main Menu Submenu Description
Monitor Status Displays the operating status of the monitor each time
the monitor is powered on. Select the location to
display the status to:
●Top
●Middle
●Bottom
●Off
The factory default is Top.
DDC/CI Support Allows the computer to control some OSD menu
features such as brightness, contrast and color
temperature. Set to:
●On
●Off
The factory default is On.
  Bezel Power LED Turns off the power LED on the front panel of the
monitor. The...

Table 4-2  OSD Menu (continued)
Icon Main Menu Submenu Description
Backlight Hours Reports the total hours of backlight operation.
  Service Support
http://www.hp.com/support
Factory Reset Returns all OSD menu settings and DDC/CI controls to
the factory default settings, except the Language.
Source Control
(LE2001wm model
only)  Selects the video input signal. VGA is the factory
default.
    DVI Selects DVI as the video input signal.
    VGA Selects VGA as the video input signal.
  Default Source Selects...