HP LaserJet Pro P1102 User Manual

USB connection
This product supports a Hi-Speed USB 2.0 connection. You must use an A-to-B type USB cable that is no
longer than 2 m (6.56 ft).
HP Smart Install
NOTE: This installation type is supported for Windows only.
The HP Smart Install allows you to install the product driver and software by connecting the product to a
computer through a USB cable.
NOTE:The installation CD is not required during a HP Smart Install. Do not insert the software
installation CD into the computer CD drive.
1. Turn the...

Network connection (wireless models only)
The product can connect to wireless networks.
Supported network protocols
To connect a networking-equipped product to a network, you need a network that uses one of the
following protocols.
●TCP/IP (IPv4 or IPv6)
● Port 9100
● LPR
● DHCP
● AutoIP
● SNMP
● Bonjour
● SLP
● WSD
● NBNS
Install the product on a wireless network with HP Smart Install
NOTE:
This installation type is supported for Windows only.
The HP Smart Install allows you to install the product...

●If the HP Smart Install program does not star
t automatically, AutoPlay might be disabled on
the computer. Browse the computer and double-click the HP Smart Install drive to run the
program. If you cannot find the HP Smart Install drive, use the product installation CD to
install the software.
● If the program prompts you to select a connection type, select the connection type you will
use to print to the product after installation.
2. Follow the onscreen instructions to complete the product...

Perform a peer-to-peer (ad-hoc) wireless installation
The product can be installed wirelessly to a computer through a peer-to-peer (ad-hoc) installation.
1.Turn on the product, and then restore the network setting.
2. Print a configuration page (see 
Configuration page on page 56), and find the network name
(SSID) in the Network Information section.
3. Refresh the computer wireless network connection  list, and then click the product network name
(SSID) and connect to it.
4. After several minutes, print...

Configure the network product
Use the Wireless Configuration utility
Use the Wireless Configuration utility to configure the product to print on a wireless network.
1.Connect the wireless product to the computer through a USB cable.
2. Click the Start  button, and then click the  Programs or All Programs  menu item.
3. Click the HP  menu item, and then click the  HP LaserJet Professional P1100 Printer series
menu item.
4. Click the Wireless Configuration  menu item.
5. Follow the onscreen instructions to...